Used Construction Fence for sale (18,890)

Condition: used, Westtech Woodcracker CS750 Smart Available immediately Features: - Endless rotating tiltator - Cutting diameter: 750 mm - Gripper opening width: 1,280 mm - Own weight (basic/fully equipped): 820/980 kg - Recommended hydraulic flow rate: 65–110 l/min - Recommended operating pressure: 230–280 bar - Carrier vehicle operating weight: 15–30 t - Saw box: actively suspended - Saw chain lubrication: grease Cgodpfxoyfqz Ue Aa Not - Optional: Power tiltator, endlessly rotatable Multiple units in stock / fits perfectly on Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be supplied in combination with a Magni machine. Also compatible with Merlo. We are official Westtech Woodcracker sales and service partners, Magni telehandler sales and service partners, JCB construction equipment sales and service partners, Mercedes-Benz service partners, Iveco service partners, and with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: used, Gierkink GMT 050 Felling Head Maximum Grapple Opening: 122 cm Maximum Cutting Diameter: 50 cm Minimum Cutting Diameter: 8 cm Tilt and Coupling Lock Felling Grapple Weight: 395 kg Cjdpfx Aajyfpzao Negt Maximum Grapple Load: 2,500 kg Recommended Oil Flow: 45–80 L/min Maximum Operating Pressure: 250 bar Saw Blade Length: 64 cm Effective Saw Blade Length: 50 cm Saw Motor: 10cc Piston Motor Optional: We are happy to install the felling grapple onto your carrier vehicle in our vehicle workshop. Request a quote easily. We are an official GMT sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We offer the complete GMT product range! Errors and prior sale excepted. Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: used, Gierkink GMT 050 Felling Head Maximum grapple opening: 122 cm Maximum cutting diameter: 50 cm Minimum cutting diameter: 8 cm Weight of felling grapple: 395 kg Maximum grapple load: 2,500 kg Recommended hydraulic flow: 45-80 liters/minute Maximum operating pressure: 250 bar Saw blade length: 64 cm Effective saw blade length: 50 cm Saw motor: 10cc piston motor Cgjdpfx Aaoyfvwus Njt Optional: We are happy to mount the felling grapple onto your carrier vehicle in our vehicle construction facility. Simply inquire. We are an official GMT sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete GMT range for you! Errors and prior sale excepted! Rental available = Further information = New: Yes Please contact Tobias Ebert for more information.

Condition: used, Gierkink GMT 035 Felling Head Maximum grapple opening: 85 cm Maximum cutting diameter: 40 cm Minimum cutting diameter: 5 cm Weight of felling grapple: 245 kg Maximum grapple load: 1,500 kg Recommended oil flow: 35–65 liters/minute Maximum operating pressure: 250 bar Saw blade length: 46 cm Effective saw blade length: 35 cm Saw motor: 10cc piston motor Optional: We are happy to mount the felling grapple to your carrier vehicle in our vehicle workshop. Simply inquire for details. Cgsdpfx Aasyfrd Ds Nst We are an official GMT sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete range of GMT products! Errors and prior sale excepted! Rental possible = Additional Information = New: Yes Please contact Tobias Ebert for more information.

Condition: used, Gierkink GMT 035 Felling Head Maximum grapple opening: 85 cm Maximum cutting diameter: 40 cm Minimum cutting diameter: 5 cm Tilt and coupling lock Weight of felling grapple: 245 kg Maximum grapple load: 1,500 kg Recommended flow rate: 35-65 liters/minute Csdpfjyfpl Esx Aa Njgt Maximum operating pressure: 250 bar Saw blade length: 46 cm Effective saw blade length: 35 cm Saw motor: 10 cc piston motor Optional: We are happy to install the felling grapple onto your carrier vehicle in our vehicle workshop. Just ask for a quote. We are an official GMT sales and service partner, Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete GMT program for you! Errors and prior sale excepted! Rental available = Further information = New: Yes Contact Tobias Ebert for further information.

Condition: new, functionality: fully functional, empty load weight: 12,000 kg, maximum load weight: 80,000 kg, overall weight: 92,000 kg, tire size: 245/70 R 17.5, Year of construction: 2026, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty New Lowbed Semi- Trailer. Lider Trailer for Heavy-Duty Trailers High-Quality and Durability Manufacturing EU Standards. Cgodpsrcif Hjfx Aa Njt EBS or Double Line Brake Systems. One-year Warranty for Manufacturing Defects. Customer Requested Colour. 2026 Production

Condition: new, functionality: fully functional, empty load weight: 10,000 kg, tire size: 235/70 r 17.5, Year of construction: 2026, operation weight: 50,000 kg, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty New Lowbed Semi- Trailer. Lider Trailer for Heavy-Duty Trailers. High-Quality and Durability Manufacturing. EU Standards. Double Line Brake Systems. One-year Warranty for Manufacturing Defects. Codpfxsrdd Hhs Aa Njgt 2026 Production Customer Requested Colour.

Condition: new, Year of construction: 2025, You need a mobile and powerful compressed air supply for construction sites, sand and dry ice blasting or earth rockets? We offer high quality and robust models from the manufacturer Hertz Kompressoren from Bamberg. Many models are available from stock at short notice or already pre-ordered for shortened delivery times. We look forward to your inquiry and are happy to advise you. You are welcome to inspect and test the machine at our premises. Technical data: Model: Hertz/MAC3 MSP3000 Delivery rate(7bar/10bar): 2.9m³/min and 2.1m³/min respectively. Drive motor: KUBOTA-Stage V D1105 Rated power: 18,1kW Cedsncc Snepfx Aa Nogt Further information and data sheets available on request. Equipment: - Includes integrated compressed air aftercooler - Mounted on chassis up to 750KG - Unit can be supplied in 7 or 10 bar version. Additional accessories such as compressed air hose according to DIN20018 and couplings available. If you have any questions, please do not hesitate to contact us. Do not hesitate to call us. We will gladly take over the commissioning, maintenance and approval of the machine for you. Errors and prior sale excepted. All prices plus VAT. Delivery condition: ex works, packed. Best regards RAW INDUSTRIAL TECHNOLOGY Your specialist company for compressed air and automation.

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,800 kg, axle configuration: 2 axles, tire condition: 100 %, color: silver, Year of construction: 2025, Autotransporter REPO R2P – Top Quality for Safe Vehicle Transport! This trailer is the ideal solution for the secure and professional transport of: • Construction machinery and excavators • Other vehicles ✅ Robust and durable construction ✅ High stability and safety during transport ✅ Perfect for both private and commercial use This car transporter stands out for its quality, reliability, and well-thought-out design – ideal for anyone aiming to deliver vehicles safely to their destination. Technical specifications: • Manufacturer: REPRO • Model: Vehicle Transporter • Permissible total weight: 3,500 kg • Unladen weight: approx. 700 kg • Axles: 2 • Tires: 195/50 R13C • Length: 5,290 mm • Width: 2,100 mm • Loading platform length: 3,500 mm • Drawbar load: 150 kg Cgedpeyqyf Tjfx Aa Nst The trailer is in absolutely as-new condition and ready for immediate use. Location: Rheda-Wiedenbrück Price: €4,790 net plus VAT If you are interested or have any questions, please feel free to contact us! Viewing on-site can be arranged by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 176 h, load capacity: 6,000 kg, fork length: 3,200 mm, fork width: 650 mm, We are offering a Genkinger Hubtex low-lift pallet truck here. Pedestrian device. Specially manufactured. Suitable for operation in harsh environments • Very good overall condition, only 176 operating hours • Hawker LifeTech Modular charger Cgjdpfx Asydv Hmea Njt • Battery recently tested, in very good condition • UVV inspection will be carried out anew before delivery • Fork length: 3.20 m • Fork width: 0.65 m • Lifting capacity: 6000 kg! Viewing by appointment possible! Pallet truck, lifting equipment, electric pallet truck, pallet jack, pallet mover

Condition: excellent (used), Used steel hall 36.5 x 13.5 m, eave height from finished floor approx. 9.8 m, gable roof with 3° pitch, top edge of crane runway for installation of bridge cranes approx. 8.5 m from finished floor. The existing hall was originally fitted with two 10t cranes. Steel structure including roof purlins, wall rails, crane runway, without wall panels, windows and doors, bracings... as shown. Base plates need to be newly constructed on site by the buyer. Pricing: €102,000, ex works, loaded, from location 56759 Kaisersesch. Additionally offered: 2 Demag single-girder bridge cranes, 10t x 12,000 mm, lifting height from finished floor approx. 7.5 m. Lifting speeds 4/0.8 m/min, trolley travel speeds 20/5 m/min, crane travel speeds 40/10 m/min. The cranes will be handed over in top condition after workshop inspection, each with new HBC Micron 5 radio control, mutual optical shutdown, pre-limit shutdown at the trolley and crane runway ends. Pricing: €24,000 per crane, ex works, loaded, from location 56759 Kaisersesch. New power supply for on-site installation along the crane runway, 36 m, 4-pole, 15 mm², incl. crane main switch, €4,000 Drawings and structural calculations are not available and must be provided by the buyer. Package price for all items together, ex works, loaded: €130,000 negotiable. Cgedjpqx I Hspfx Aa Not

Condition: used, Production boards Wasa Uniplast 1250x850x45 Codsyxf S Aspfx Aa Njgt 1700pcs price: 17 euro pcs

Year of construction: 2023, condition: used, General information New: Yes Weights Cgjdpfxeyuwi Rs Aa Not Empty weight: 50 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 1x0,47x0,57 Production country: NL Additional information Please contact Vink Machinery for more information Hoeflon CX5-L glass suction cup * 2023 UNUSED!! * Battery powered * Remote Control * 500 kg lifting capacity * 50 kg own weight

Year of construction: 2025, condition: used, New: Yes Cjdpfx Aaeyz Skds Nsgt Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Year of construction: 2026, condition: new, TNDG manual positioner with handwheel operation and pneumatic clamping. Measurement display via linear encoder and digital readout. Available in lengths of 3, 4, 6, and 8 meters Working height: 800–1050 mm Permissible load: 70 kg per meter Roller dimensions: 40 x 300 mm PACKING AND DIMENSIONS: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) We look forward to your inquiry! Plantec Maschinen GmbH Cgodpfspa Nzyex Aa Net

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with angle adjustment Specialized drilling machine for staircase construction, window manufacturing, and universal applications, featuring pneumatic height adjustment. Angled doweling and spindle boring for balusters can be easily performed thanks to the rotatable drilling unit. Motor with pole-changing capability, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via convenient handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can swivel 65° to the left and right Pneumatic adjustment of the working height, doweling on two levels without repositioning Desired drilling heights can be set for each level using a handwheel and digital counter; switchover is then performed pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, positionable at the front and rear of the table 2 swivel workpiece supports 2 side stops, also usable as front supports Mobile base Extraction port 80mm Codsyfta Tepfx Aa Nogt 4 used but good drill bits: 9, 12, 16, 19mm Minor paint touch-ups; excellent condition—see original photos A used swivel slot mortising machine in this condition is very rarely available. CE mark User manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Condition: used, Axle: + Carraro Cgsdpfx Aaeyx Hgne Nst + Type 26.16 Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Cgsdpfew Sfptsx Aa Not

Condition: new, Mobile warehouse Csdpfx Aoxzrtpoa Negt customized quotation

Year of construction: 2013, condition: used, Year of manufacture: 2013 Empty weight: 157 kg Carrying capacity: 295 kg GVW: 452 kg Working height: 732 cm General condition: good Technical condition: good Visual appearance: good Manufacturer: Genie Type: SLC-24 Year of manufacturing: 2013 Weight: 157 KG Product number: 22059 Lifting height: 7,32 m Transport height: 2,18 m Lifting capacity: 295 KG Machine is technically in good condition. Documents incl. CE. Cgsdpfxoyywv Ne Aa Not Price: € 1.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Year of construction: 2009, condition: used, Year of manufacture: 2009 Empty weight: 157 kg Carrying capacity: 295 kg GVW: 452 kg Working height: 732 cm General condition: good Technical condition: good Visual appearance: good Manufacturer: Genie Type: SLC-24 Year of manufacturing: 2009 Weight: 157 KG Product number: 22058 Lifting height: 7,32 m Transport height: 2,18 m Lifting capacity: 295 KG Machine is technically in good condition. Documents incl. CE. Price: € 1.750,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Codpfx Aaoyywwae Nsgt Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 20 h, Equipment: onboard computer, Mobile cement silo for big bags/bagged goods/loose goods; capacity approx. 3m³; with screw conveyor; electronic weighing system and vibrator, powered by a Honda 5kW unit, electronic control panel, fall protection, transport lugs Codpfxsulddue Aa Nogt

Condition: used, Year of construction: 2006, machine/vehicle number: 21741076, JCB loader frame, axles, hydraulics. Cgedpfx Ajv Immusa Nst

Condition: excellent (used), Year of construction: 2017, PERII production pallets, dimensions 1200x1100x50 mm, quantity 4,000 pcs, price given per piece, condition B – good. Codpfsx Hdpiox Aa Nsgt

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Csdpfxetp H Ers Aa Nogt Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15