Used Construction Sites for sale (31,774)

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height Bsdpfx Aboxmatnezjww - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Year of construction: 2023, condition: used, Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Complete ABB DPA250 S4 Modular UPS system 200kW, 200kVA power per cabinet 176 pieces of 80Ah, 12V batteries with a total of 169 kWh battery capacity Input: Nominal input voltage: 220 to 380, 230 to 400, 240 to 415 VAC Voltage range: 161 to 280, 264 to 460 VAC Current THD at 100% load: 3% or less Power Factor at 100% load: 0.99 or higher Bedpfx Ajxr S Emebzsww Output: Rated output voltage load dependent: 220 to 380, 230 to 400, 240 to 415 VAC Rated frequency: 50 or 60 Hz selectable

Condition: excellent (used), functionality: fully functional, empty load weight: 19,200 kg, maximum load weight: 73,000 kg, overall weight: 92,200 kg, axle configuration: > 3 axles, first registration: 08/2009, next inspection (TÜV): 01/2026, loading space length: 15,000 mm, loading space width: 2,700 mm, suspension: full air, color: black, Year of construction: 2009, Equipment: ABS, FAYMONVILLE STZ-6WAU – 6 AXLES – 92.2T GVW – 73T PAYLOAD – HYDRAULIC RAMPS – EXCELLENT CONDITION! 🚛💪 Looking for a reliable and versatile low-loader trailer? ✅ We are specialists in the sale of heavy vehicles and transport equipment – offering only proven machines in excellent technical condition. Check out our offer and find the equipment that suits your logistics needs! 🔍📦 📌 In this listing we present: FAYMONVILLE STZ-6WAU MULTIMAX – Year: 2009 – 6-Axle Trailer – TECHNICAL CONDITION: EXCELLENT ✅ 🔧 Key Features & Technical Specifications: Model: FAYMONVILLE STZ-6WAU MULTIMAX Year of Manufacture: 2009 Number of Axles: 6 Gross Vehicle Weight (GVW): 92,200 kg Payload Capacity: 73,000 kg Total Length (closed): 15 m Loading Area Length (closed): 11 m Extendable by: 4 m Total Length (extended): 19 m Tires: 70% tread remaining Axles: 2 lifting, 4 steering Ramps: Hydraulic ♻️ Extras: Side toolboxes 🧰 Bwedoxmv R Nspfx Abzow ✅ Technical Condition: Mechanically: No issues – fully operational and ready to work immediately 🔧 Visually: Very good – well-maintained, post-service 🧼 Usage: Perfect for transporting heavy construction equipment, industrial machines, and oversized cargo 🏗️🚜 ⭐ Additional Advantages: Durable structure by the renowned manufacturer FAYMONVILLE Hydraulic ramps for easy loading/unloading ⬆️⬇️ Suitable for various terrain conditions 🌍 Improved maneuverability with steering and lifting axles 🔄 Practical storage compartments for extra gear 🧰 🌍 Transport & Financing: We arrange trailer transport across all of Europe Free start-up inspection included! 🔍 Support with financing – leasing, credit, Start-Up program Leasing decision in as little as 2 hours! ⏱️ Invoicing in EUR/PLN We are an authorized supplier for most leasing companies 🤝 🚀 Don't wait – choose quality and reliability! We invite you to contact us and schedule a viewing today! 👋

Year of construction: 2010, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 17414 Specifications: - About. 2010 model Bwedpfevg N Raex Abzjw - B20 attachment - Complete rotor tilt - Can be delivered within a short time. Description: Complete Engcon rotor tilt with B20 attachment. The tilt should work well. Can be delivered within a short time.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Bjdpfexq Rrcox Abzsww

Condition: used, 1 lot, steel tube supports, in stock in 12 stackable racks, various versions Bwodpjxp Ia Ijfx Abzsw

Condition: new, functionality: fully functional, BERTOJA SEMITRAILER 13.80m NEW, READY FOR REGISTRATION Bwedpfxjxpi A Rj Abzew Double galvanized hydraulic ramp Small sideboard on the neck Winch preparation Self-steering axle CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30am–7:00pm • SATURDAY 8:30am–2:00pm WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semitrailer - Refrigerated Semitrailer/Tank – Lamberet - Schmitz - Isuzu - Fixed bed - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 HP - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition - Curtain side - Box van - Side-loader - Refrigerated cell - Insulated with fridge - Van Domenico Truck srl declines any responsibility for possible discrepancies in equipment, options, or features which may differ in some cases from those stated in the description. We advise you to verify the details of the specific vehicle.

Condition: used, Year of construction: 2021, total length: 3,050 mm, load capacity: 790 kg, - Standardbereifung 23x8.50-12”grass/TR - Kraftübertragung Hydrostatischer Fahrantrieb - Schubkraft 700 kp - Fahrgeschwindigkeit 12 km/h - Hydrauliköltank, Füllmenge 26 l - Hydraulikölspezifikation ISO VG 46 - Zusatzhydraulik 34 l/min 185 bar Bwjdpfx Asxg Tgbobzsw - Wenderadius innen/außen 880 / 1970 mm - Hand-Arm-Vibration, Total < 2,5 m/s² - Ganzkörpervibration, max. < 0,5 m/s²

Year of construction: 2023, condition: used, New: Yes Empty weight: 41 kg Serial number: P21410070W Bwjdpjxq Uprefx Abzjw Transport dimensions (LxWxH): 3,4x2,9x4,1 Production country: JP Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Rated current (A): 1000 Poles: 3

Year of construction: 2011, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20207 Bodpfowdvk Tex Abzsww Description: We have a 2011 Scandust 6000 sanding vacuum 400 volts for sale. Comes with hose and some used filters. The vacuum cleaner has been used very little, but needs a cleaning according to the owner. Used for sanding concrete surfaces. Ready to ship

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils Bwodow Hzkwspfx Abzsw • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation • Turn-key ready to use

Condition: used, 1 unit tower crane, manufacturer Liebherr, model 20 K, year 1991, serial number 112043/19, counterweight, remote control Bodpfx Asxp H T Hjbzjww

Year of construction: 2007, condition: ready for operation (used), A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible. Bwjdoxpw Tdspfx Abzow

Condition: ready for operation (used), functionality: fully functional, power: 2.94 kW (4.00 HP), fuel type: gasoline, Marking machine: - Titanium - Promark 690 - Airless pump - Honda GX120 engine, 4hp Bedotpxg Tspfx Abzeww Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: good (used), Year of construction: 1988, Low loader / semi-trailer Van Hool type H0007 year of manufacture 1988 Bwjdpsxqw Tmsfx Abzow loading platform length approx. 8.20 m (flat deck) loading platform width approx. 2.5 m Height from ground to loading platform 63 cm

Condition: used, Serial number: MS410HS-23E-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21476 Specifications: 665 kg S50 attachment Oil Flow: 70-90 l/min Ready for delivery Bwjdpfx Absxivu Hszjw Description: We have an MSB corporation MS410HS Spike hammer w/ S50 attachment for sale. The spike hammer has hardly been used, max 10 hours according to the owner. Everything works as it should. Ready for delivery Own weight: 665 Model: corporation MS410HS Pigghammer m/ S50 feste

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Bwodpfjw Hzfnsx Abzsw Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: used, functionality: fully functional, fuel type: gas, Year of construction: 2012, machine/vehicle number: 47101183, Once connected to power and gas cylinder, the mobile gas heaters are quickly ready for use. The ideal units for construction tradespeople: compact and transportable in any passenger car. The gas heaters can be operated continuously between 14 and 96 kW without heat loss. Multi-cylinder systems are available for simultaneous connection to several gas cylinders. Bodpoxpvgvjfx Abzoww

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, - Hook height: 23.8 m Bedpexm S Evefx Abzsww - Jib length: 40 m - Including ballast Very good condition, as it has seen little use.

Condition: new, functionality: fully functional, empty load weight: 8,500 kg, maximum load weight: 60,000 kg, Year of construction: 2025, Equipment: ABS, Heavy-Duty New Lowbed Semi- Trailer Lider Trailer for Heavy-Duty Trailers High Quality and Durability Manufacturing Bwodpercb Irefx Abzew EU Standards One-year Warranty for Manufacturing Defects. Customer Requested Colour.

Year of construction: 2022, operating hours: 4,235 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 18235 Specifications: - 2022 model - 4235 Hours - 400 Volts - 50 Hz - 90 kW - 158.7 A - Telescopic legs - Vacumsilo 1m3 frame with telescopic legs - Industrial vacuum cleaner - Dry sucks - Flanges the shift - The cyclone separator for the silo has been replaced - Delivery by agreement Description: All filters are new and unused and the cyclone separator and damper valves on the suction have been replaced and reinforced. It comes with 1 extra cyclone separator which is reinforced inside, as are flanges for valves. Delivery by agreement Bedpjvg Rb Tjfx Abzsww Hours: 4235 Own weight: 1 Kw: 90 Model: VacbLast

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Bodpfsw Hzfzsx Abzeww The panel will be in type of compiled to IC standarts.

Year of construction: 2022, operating hours: 3,029 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 18239 Specifications: - 2022 model - 3029 Hours - 400 Volts - 50 Hz - 90 kW Bodevg Rbmepfx Abzoww - 158.7 A - Telescopic legs - Vacumsilo 1m3 frame with telescopic legs - Industrial vacuum cleaner - Flanges the shift - The cyclone separator for the silo has been replaced - Delivery by agreement Description: All filters are new and unused and the cyclone separator and damper valves on the suction have been replaced and reinforced. It comes with 1 extra cyclone separator which is reinforced inside, as are flanges for valves. Delivery by agreement Hours: 3029 Own weight: 1 Kw: 90 Model: VacbLast

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. Bodpfxow Hza Se Abzoww - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Year of construction: 2008, condition: used, Please contact ATS Norway for more information Bwodpfjwwqdujx Abzow Please provide reference number upon request: 20893 Specifications: Year: 2008 Bucket volume: approx. 1,600 liters Bucket width: approx. 200 cm S70 quick coupler (top and bottom) Previously mounted on CAT 325DL (2008 model) 4 hydraulic hoses (approx. 240 cm) Extra outlet Control system: Engcon No. 9 Description:Engcon EC30 tiltrotator and SMP grading bucket sold as a set.Both feature S70 couplers and were previously fitted to a CAT 325DL.According to the owner, both units are in decent working condition.Available for prompt delivery. Own weight: 1000 Model: EC30