Used Construction Sites for sale (22,787)

Condition: used, Year of construction: 2012, operating hours: 2,093 h, 2012 | Terex Hd 1200 | Used Site Dumper | 2093 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Dusdsx Hqg Ijpfx Afpsn 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 29 inspection points 19 approved ✅ 1 imperfect ℹ️ 9 issues ⚠️ 📌 Inspector's Comment: The unit would not start properly with the ignition switch. But the seller has confirmed that it is in ok running condition and just came back from rental. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40165 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Dodpfx Aex D Df Njfpoun Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight Duodpfx Aox D Dbksfpsn • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation • Turn-key ready to use

Condition: used, New: Yes Colour: Silver Duodpfx Afsx D A R Depen Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame Dodpfx Ajx D A Rkjfpeun - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Dujdpfsxu I Ddjx Afpon

Year of construction: 2007, condition: ready for operation (used), A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible. Dusdpoxpw Tdjfx Afpon

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Dusdpfx Aoxu I A Tefpen

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Dujdpfx Ajw Sfptefpsn

Condition: excellent (used), For sale: Steady rest for lathe. Professional workshop equipment for stable guidance of long and heavy workpieces during machining. Solid cast iron construction – maximum rigidity and durability. Working opening approx. 150 mm (measured with caliper). Opening frame – quick and convenient clamping of the workpiece. Adjustable pins with sliding tips. Attachment to the lathe bed via a base with hole. The steady rest is intended for turning shafts, tubes, bars, and other long elements that require support during machining. Dodpfx Afow Sfpyepeun

Year of construction: 2001, operating hours: 8,832 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Empty weight: 11.000 kg Dusdjx R T Nmepfx Afpen Please contact Emal Jaweed for more information

Year of construction: 2019, operating hours: 2,351 h, condition: used, Transmission: Automatic Power: 218 kW (296 HP) Dedpfx Asx R T Naofpoun Empty weight: 36.500 kg Please contact Emal Jaweed for more information

Condition: used, Year of construction: 2014, operating hours: 2,949 h, 2014 | Wacker Neuson 4001 | Used Site Dumper | 2949 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 37 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition and operation, smokes lightly during cold starts. Moderate play in the central joint. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39900 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Duodpfxoyf Dxms Afpen ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), 4000 pcs production boards Mywood 1400x1150x50 - out of production March 2026 - price: 15 euro pcs Dodpjyftzdofx Afpjun

Condition: new, functionality: fully functional, Custom-tailored personal quotation Dujdpfex Ug Hyox Afpen

Condition: excellent (used), Egg layer Henke Trip for manholes 1000mm and cones - 2 moulds manhole1000 and cone 1000 - 30 base rings Duedpfx Aeyftkfofpjn

Year of construction: 2023, condition: used, For inquiries regarding this attachment, Mr. Herden will be pleased to assist you (by phone). Westtech Woodcracker T4000 Telescopic Model / incl. CS510 crane / in stock & immediately available / Year of manufacture: 2023 Price: €43,990.00 net / €52,348.10 gross Westtech T4000 Telescopic Model - Working range up to (mm): 6,350 - Telescopic extension (mm): 4,000 - Own weight (kg): 680 – 730 - Lifting moment from excavator kinematics (kNm): 92 - Approved load capacity (retracted / extended in kg): 2,500 / 1,550 - Maximum pushing force (kg): 100 - Recommended hydraulic flow for telescopic extension (l/min): 50 – 110 - Recommended hydraulic flow for auxiliary circuit (l/min): 30 – 40 - Recommended operating pressure for telescopic extension (bar): 250 - Carrier vehicle operating weight (t): 14 – 22 Westtech CS510 crane - Cutting diameter (mm): 540 - Grapple opening (mm): 1,270 - Own weight (basic – full equipment in kg): 370 – 500 - Recommended hydraulic flow (l/min): 50 – 90 - Recommended operating pressure (bar): 200 – 280 Equipment: - incl. Auto-tilt function for crane - incl. Rotator RTC 10-2 - incl. Pendulum joint with brake - incl. Transport box for CS510 crane Optional: Lehnhoff MS21 adapter plate including bolts and installation = €2,400.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Our warehouse holds a very large selection of various Westtech products that are immediately available! Mr. Herden (phone) will be happy to assist you. We are happy to provide you with a financing offer upon request. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Dedoyhu Uqopfx Afpjun We supply you with the complete range of Westtech Woodcracker products! Errors and prior sale excepted! Internal No.: 523028 / 523088 Rental possible = Additional information = Contact Tobias Ebert for more information.

Year of construction: 2019, condition: used, CE mark: yes General condition: good Technical condition: good Dusdeyg U T Ropfx Afpon Visual appearance: good Remanufactured: Yes Max. working load: 625 kg Transport dimensions (LxWxH): (L/B/H): 2,45 m / 0,83 m / 1,74 m Please contact Tobias Mayr for more information

Condition: good (used), The scope of delivery includes: 01x wooden beam, used Wood type: spruce / fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | piece: approx. 25.67 kg The price stated corresponds to the pick-up price for a wooden beam in the specified dimensions. Dodpfxsvu Rq Ds Afpsun Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for pick-up. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: diesel, color: yellow, tire size: 710x26,5, tire condition: 40 %, Year of construction: 2016, operating hours: 16,600 h, machine/vehicle number: A080191, Equipment: additional headlights, air conditioning, cabin, lighting, Ponsse Buffalo 8W forwarder K100 crane, Grippen 035 grapple Central lubrication system Dsdpfjwd E Tkox Afpsun LED lighting 2 previous owners

Condition: new, Mobile warehouse Dujdpfxjxzrtps Afpon customized quotation

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. Dusdpfon E Rm Eex Afpsn The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price.

Condition: used, color: other, Year of construction: 1983, Price: On request Dsdpfxeyhnt Hs Afpjun VAT/differential taxation: VAT deductible = Company information = For further information, you can reach us on weekdays from 8:30 AM to 5:00 PM and on Saturdays from 10:00 AM to 3:00 PM by phone. You can also email us at: See you soon!

Condition: used, Year of construction: 1990, 1990 | Sambron BW | Used Site Dumper 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 1900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 33 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ Dusdpfx Ajycmnljfpon 📌 Inspector's Comment: Working oldskool dumper, all gears function, brakes etc, starts easy with the slingstarter, good Hatz engine, manual tipping dumper, serialplate and year of manufacturing. Cannot be found. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "36253 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, operating hours: 655 h, 2018 | Wacker Neuson DT15 | Used Site Dumper | 655 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Duodpfx Aeycmnfjfpsn 💰 Buy Now for EUR 13000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 29 inspection points 29 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The dumper was in good condition during the inspection. It is a first hand machine and has been very well maintained. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39898 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.