Used Converting Machine for sale (66,674)

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm Iedoy Nd Sispfx Anijtn spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: repair required (used), Year of construction: 2010, functionality: limited functionality, workpiece weight (max.): 10,000 kg, grinding wheel diameter: 400 mm, table diameter: 800 mm, spindle speed (min.): 1,200 rpm, spindle speed (max.): 8,000 rpm, type of input current: three-phase, grinding spindle motor power: 24,000 W, overall weight: 25,000 kg, input frequency: 60 Hz, workpiece spindle speed (max.): 10 rpm, total height: 4,650 mm, total length: 7,100 mm, total width: 8,000 mm, Equipment: documentation/manual, Machine status: 1. Based on the visual inspection, no obvious signs of cracking, deformation, or damage were found on the machine enclosure, working axes, hydraulic system, in-process measuring system, cooling system, filtration unit, or other visible components. 2. The machine can be powered on, and the power supply has been confirmed to be normal. However, the axis parameters and program data have been lost, so it is currently not possible to verify whether the individual axes and overall machine movements are functioning properly. 3. After power-up, the axis positions, coordinates, machining programs, and other related data displayed on the screen all appear as question marks (“?”). The NCU battery and UPS battery were replaced, but the condition remained unchanged. 4. After power-up, a large number of error messages appear on the diagnostic page, including Itsdpfxoz Dfn Aj Anien A1-axis encoder errors, input voltage errors, control module errors, cross-error compensation errors, and other related alarms. 5. According to the customer, the handwheel is damaged and needs to be replaced with a new one. The laser printer may also be defective and requires further inspection and confirmation. 6. The hydraulic oil, cutting oil, coolant, lubricating oil, and other fluids have been stored or used for an extended period and should be replaced with new fluids. 7. The pneumatic system hoses/pipes should be inspected for aging, cracks, or damage. Replacement will be required if any deterioration or leakage is found.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Iodjz N Shnopfx Aniotn Ask About The Product

Condition: excellent (used), Folding machine GUK SA30 / FA30 / 4 SVA The machine is fully operational, ready to work. Production Germany. Equipment: – 4 pockets – mobile delivery – counter with packaging function – extensive feeder, built-in compressor – soundproofing covers cassettes – Toolkit Technical data: format max. 300 x 420 mm Itedpfx Anez N Sb Ioion format min. 100 x 150 mm smallest column 45 mm working speed 200m / min 400V power supply

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Iedpfx Ajz N Sgkonietn Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm Iodpsz N Sgwsfx Anietn 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Overhauled tensioning machine 2025 - for blades with widths up to 210 mm - mounted on a sliding carriage with flywheel drive for tensioning along two parallel lines along the blade length - tension pressure adjustable and controllable gradually - includes a hammer for correcting possible imperfections, with straightness ruler (flatness) - 0.75 kW motor - table with 4 legs for supporting the blade Itodpfx Aew Ewd Donisn

Condition: like new (used), Year of construction: 2006, operating hours: 500 h, functionality: fully functional, Control unit: SIEMENS Sinumerik 840D Solutionsline Ijdpfx Aey U Hw Esnijtn Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet The machine is located in our showroom and can be inspected under power. It has very little working hours since it was in a technical school's workshop.

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Isdox Nv S Uopfx Anietn Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: excellent (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, HAAS control with LCD screen and USB interface Table dimensions: 1219 x 457 mm Max. table load: 1588 kg T-slots in table: 16 x 80 x 5 mm X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm Distance from spindle nose to machine table: 107 - 742 mm Spindle speed: 8100 rpm Drive power: 22.4 kW Iodpfxez R Alto Anietn Rapid traverse X/Y/Z = 24.5 m/min Tool changer: 20-fold (or 20-station) Weight: 5320 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Equipment, Accessories - Coolant system - Chip auger - RENISHAW zero-point probing system with OMP60 probe - RENISHAW tool setter (not mounted) - Machine feet - Documentation The machine has been used very little and is in very good condition. It is still under power in Hungary. First owner. It was purchased as new in Hungary and has not run long hours.

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Itedpfextbtpex Anion Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. Itjdpfxoxzfqbe Anisn • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling Itjdpfsz Slqpex Anion • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Iedpfx Aew Hk T Uenijtn

Condition: new, machine/vehicle number: M1-ADM310G-Spiral, The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform Itedpfx Aevw Edwsnion technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 75 mm Planing width 300 mm Length planing table 1400 mm Admission height 240 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 310 x 600 mm Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 208 kg Optional accessories: moving device

Condition: as good as new (ex-display), Year of construction: 2025, Japa® 505 PRO: Top performance and versatility for the highest demands Advanced splitting technology with Perfect Split In addition to the proven Perfect Cut sawing system, the PRO model features a unique Perfect Split splitting blade, which, in combination with the conventional splitting blade, always ensures consistent and high-quality firewood production. Switching between the splitting methods takes only a few minutes, highlighting the exceptional versatility of this machine. Advanced cleaning with Perfect Clean The Japa® 505 PRO is equipped with the innovative Perfect Clean cleaning system, which efficiently removes sawdust, wood chips, and bark from the final product. This ensures clean and tidy firewood, which not only reduces the cleaning effort required for the machine but also significantly optimizes the workflow. Clean firewood dries faster, burns better, and achieves a higher resale value. Patented hydraulic chain tensioner Thanks to the patented hydraulic chain tensioner, sawing is always smooth and safe. It extends the life of the chain and saw blade and allows for tool-free chain changes in seconds. In addition, a hydraulic feed roller at the beginning of the feed belt facilitates the transport of large logs – for even better ergonomics, safety, and production efficiency. Technical data: Iodpfx Asxx T Aajnietn Log diameter 500 mm Splitting force 16 tons Splitting wedge 6-way Log length up to 50 cm Oil capacity 100 l PTO speed 500 rpm Motor output S1 15 kW / 400 V Gear oil 80W 90 Conveyor belt length 4400 mm Weight 2330 kg Original photos & honest descriptions. Shipping by arrangement. Fair prices. Offer price for basic machine, demo model - special equipment extra. ❓If you have any questions, please contact us – we will respond quickly and courteously!

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. Iodpfx Ansz R I U Ieistn If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: new, 18 mm M 12 M 14 MK 2 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel total power requirement 0,37/0,55 kW Isdpfx Aoyv Nddjnijtn Machine height 840 mm weight 120 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection Option 12 - LED machine light, with radially adjustable light beam, power rating 230 V, protection class IP 65

Condition: excellent (used), A robust industrial machine of German manufacture, Walther Trowal, model DLT 4, year 1980. This device is designed for surface treatment of metal, aluminum, or plastic parts – the trowalizing process (deburring, edge rounding, polishing, cleaning). A classic drum design – reliable, massive, and durable, typical of “West Germany” production. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • The machine is complete, and the drum rotates smoothly and evenly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Requires electrical connection and possibly a service inspection. • Ideal for a tool shop, machining facility, or production line. Applications: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Processing screws, bushings, stamped parts, castings, and precision parts. Condition: used, solid, classic Walther Trowal design – requires minor refurbishment or is ready for immediate use. Ijdpfxoz Slhue Anistn

Condition: excellent (used), For sale: an industrial deburring machine from the German company Rolei Eisenblätter GmbH, model PEF 500. This device is designed for the precise removal of burrs, chamfering, and preparing the edges of steel, aluminum, and other metal parts. Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust, steel construction V-shaped work table, ideal for guiding components Electric drive with safety switch Application: edge finishing, chamfering, weld preparation, burr removal after cutting and machining Itjdpfxjz Slc Ee Anion The machine is in good working order and technical condition. The construction is very stable, making it ideal for workshops, metalworking shops, tool rooms, and serial production.

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) Itodez Slpxopfx Anien • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 269588 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 29,9 (mit Absaugung) kW 6100 x 2070 mm 6100 mm 2070 mm 125 mm 6096 x 2032 mm 240 (für 3 - 12kW) / 400 kg/m² 5800 (für 3 - 12kW) / 960 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Itedpfx Anox U Elnjijn Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Automatic nozzle change

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Iedsitvkujpfx Anijtn Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm Isdpfx Anowiq N Ieijtn 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, For sale, a new milling machine. Iedpsz Sb Tgofx Anietn