Used Copper for sale (513)

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Redpfx Aezx Dwnoirsch Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: refurbished (used), Year of construction: 2016, operating hours: 18,000 h, DG Tech – Authorized BLM Group Inspection Center DG Tech was created as a spin-off of DGService to specifically address the market for used BLM Group machines. Thanks to our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. We handle the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high quality standards. We directly manage logistics, disassembly, and transportation, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operating lease solutions to optimize investment and productivity. LC5 laser cutting machine, combined tube and sheet metal processing Materials processed: mild steel, stainless steel, aluminum alloys, copper, brass. Round tube: min 12 mm, max 120 mm – Square tube: min 12x12, max 100x100 mm – Rectangular tube: min 10x12, max 120x70 mm Rjdpfxozhw Eqj Airsch Maximum bar weight: 13.5 kg/m Sheet metal processing limits: 3000×1500 mm Configuration: Automatic Tube Loading System (Rear) 6500 – Unloading 4500 max

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors Rcodpfxszgx H Hs Airoh * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools Rcjdpfxozgfnqo Aireh ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, 🔥 FOR SALE: Fiber Laser Welding Machine — XTW-1000 (2020) A professional-grade fiber laser welding machine, model XTW-1000, manufactured in June 2020, is for sale. The machine is in excellent working condition and ready for immediate use. Rcjdpfx Ajyzcg Njirsh This unit is perfectly suited for precision welding of stainless steel, carbon steel, aluminum, copper, galvanized sheet, and various metal alloys. Laser welding is 4–10 times faster than conventional TIG/MIG welding, produces clean and smooth welds with minimal heat distortion, and requires little to no post-processing work. 📋 TECHNICAL SPECIFICATIONS • Model: XTW-1000 • Laser type: Fiber laser • Output power: 1000 W • Laser wavelength: 1080 nm • Laser spot size: 1–2 mm • Rated power: 7500 W • Supply voltage: 220V / 50Hz • Current: 30 A • Laser safety class: Class 4 • Serial number: 202005145 • Manufacturing date: 2020-06-01 • Certification: CE ✅ APPLICATIONS • Sheet metal processing & manufacturing • Stainless steel product & kitchen equipment fabrication • Automotive repair & bodywork • Elevator & staircase manufacturing • Tool & hardware production • Custom metalwork & repair workshops 📞 For further details and pricing — contact the seller!

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. Rcedexgukbspfx Airjh The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: used, Year of construction: 2021, cooling capacity: 6.3 kW (8.57 HP), type of cooling: air, overall weight: 99 kg, total width: 400 mm, total length: 1,160 mm, total height: 950 mm, heating capacity: 6.8 kW (9.25 HP), Aircooled chiller/Heat pump CLIVET WSAN-YMi 31 6.3 kW / 6.8 kW Cooling capacity: 6.3 kW / 1.79 tons (12/7 — 35°C) Heating capacity: 6.8 kW / 1.93 tons (40/45 —7°C) Year of manufacture: 2021 Version: 250 V, 1 Phase, 50 Hz Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi SVB220FLGMC-L (scroll, inverter) Type of refrigerant: R32 Redpfxeym Sk Ts Airech Number of fans: 1 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo RS15/6-RKC M, expansion vessel. Dimensions: 1.16x0.4x0.95 m Weight: 99 kg Working hours: 928 h. Needs to be configured

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine Rjdpfx Aijx A Hageroch PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: new, Year of construction: 2026, Laser power: 6000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Rsdpfoxaykaox Airjch Max. copper: 8 mm Max. brass: 14 mm Max. workpiece weight: 1000 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 4800 kg Electrical connected load: 34 kW

Condition: new, Laser power: 12000 Watt Working range laser: 6100 x 2050 x 440 mm Redpfxexaykye Airech simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: 12000 mm Width: 5000 mm Height: 2200 mm Machine weight: 14200 kg Electrical connected load: 62 kW

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 20.35 kW (27.67 HP), type of input current: three-phase, type of cooling: air, overall weight: 120 kg, input voltage: 400 V, total width: 550 mm, total length: 1,120 mm, total height: 1,250 mm, warranty duration: 6 months, Aircooled chiller AERMEC ANL080 Y 20.35 kW Cooling capacity: 20.35 kW / 5.79 tons (12/7 — 35°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. COPELAND ZH19K1P-TFW-524 (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Dimensions: 1.12x0.55x1.25 m. Weight: 120 kg. Working hours: 7000 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. Rodpfxsw Rvczj Airoch LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2019, condition: used, For sale is a used cable granulation plant. Technical Data: Model: QJF-600 Voltage: 380V Frequency: 52.37 Hz Total Power: 53 kW Circuit Breaker: 125A Weight: approx. 3200 kg Dimensions: 3.5m x 2.0m x 2.8m Cable Diameter: 0.3–20 mm (dry cables only!) Capacity: 150–200 kg/h (cable/hour) Number of Blades: 10 rotating, 4 stationary Rcjdpfx Aow Sv Rzeireh Separator: L2.9 x W1.9 x H3.4 m Crusher: L1.97 x W1.4 x H1.95 m Output varies depending on the type of cable processed. This cable granulation plant is suitable for various types of copper cables with diameters up to 20mm. The cable shredder is straightforward to operate and very efficient. Up to 98.7% of the copper can be recovered from the cables. The machine price is €25,000 net, excluding shipping and installation. Transportation can be arranged upon request. Once you provide the postal code, we will calculate the delivery costs. Please note that transport costs must be added to the purchase price. Offer valid while stocks last. Subject to prior sale and errors! Installation and delivery available at additional cost!

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Rcodpfxow U A T Io Airoh Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) Rcsdpfoyuyz Njx Airjh • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: used, Year of construction: 2017, Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW Rcsdpfjyrfxzsx Airjh Standard configuration - Maximum positioning speed parallel axis x, y: 120 m/min- Maximum simultaneous positioning speed: 170 m/min- Positioning accuracy Pa: +/- 0,05 mm- Repeatability Ps: +/- 0,025 mm- Maximum workpiece weight: 1100 kg- Operation via panel: ByVision Touchscreen and manual control unit Extended machine accessories - nozzle changer 40 positions- Detection Eye - Cut Control- Power Cut Fiber Automation - ByTrans Extended

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Max. sheet size: 3000 x 1500 mm Fiber laser 3 kW Max. material thickness: Carbon steel: 20 mm, Stainless steel: 12 mm, Aluminum: 12 mm, Copper: 6 mm Accuracy: Repeatability ±0.05 mm Sheet change time: 27 sec. Cutting hours: 15400 h Length: 10495 mm Width: 6903 mm Redpfx Aoyr N Uaoirjch Height: 2880 mm Weight: 13000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 120 bar, high-pressure hose length: 10,000 mm, pressure: 150 bar, empty load weight: 40 kg, warranty duration: 24 months, input frequency: 230 Hz, SPECIFICATION: Model: KPC-3.5P Code: K8.011.0051 Voltage/Hz: 230/50 Pressure (Bar): 120/150 max Flow Rate (L/h): 660 Power (W): 3000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH INTEGRATED BYPASS VALVE 18 mm CERAMIC PISTONS STAINLESS STEEL INLET AND OUTLET VALVES INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS STOP&GO FUNCTION Rodpfjw Iccijx Airsch EQUIPPED WITH PROFESSIONAL ACCESSORIES FEATURING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR REMOVING ALL TYPES OF CONTAMINANTS AND SURFACES INCLUDES A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL BRAIDED HOSE Why choose a crankshaft pump with ceramic pistons? - The crankshaft pump is a solution renowned in industrial applications. Its robust design ensures a significantly longer service life compared to more affordable washers equipped with axial or rotary pumps. - Ceramic pistons offer exceptional resistance to high temperatures and wear, providing reliable and quiet operation for years. - Thanks to this construction, the unit can be used in continuous operation mode without the risk of overheating or excessive component wear.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Rjdpfx Aiedfcqajrsch Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Folding bench ZGR-2140/0.8 Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors plus 350 euros Manual folding machine plus 75 euros Redpjci Hlfjfx Airoch Delivery costs: PLEASE ASK Price: 1050 euros Delivery date: every week Cash on delivery and bank transfer in advance We are looking forward to your contact!

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Rcedpjgcbwgjfx Airsh

Condition: as good as new (ex-display), Year of construction: 2022, This price applies exclusively to the demonstration machine (transport platform included). Machine dimensions: • (L x W x H) 5308 mm x 2810 mm x 1860 mm, length with filter 6582 mm. Technical details: • Year of manufacture: 2022 • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 2 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min. • Max. acceleration (X-Y): 14 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm • Cutting range: • Steel: 12 mm • Stainless steel: 6 mm • Aluminum (AlMg3): 6 mm • Brass: 6 mm • Copper: 3 mm Standard equipment: • Control system: Bosch Rexroth • Laser head: Precitec light Cutter F 125 Focus (manual) • Sheet metal detection and measuring system • Positioning laser diode • Central lubrication unit • Chip tray • Software: Lantek, or Metalix CAD/CAM software with Autonesting • Remote control: Remote maintenance • Laser cutting options: • Pierceline (piercing settings) • Focusline Rceded R Uzrjpfx Airjh • Plasmaline • Fastline • Flyline The machine can be inspected and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 30 W, sheet thickness steel (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, The Durma HD-F 3015 Fiber laser cutting machine in 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine developed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability and outstanding customer service. Features: 30 kW / 80 mm mild steel 50 mm stainless steel Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal distance F300 mm Conveyor system Technical data: Power: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Z-axis stroke: 160 mm Maximum synchronous speed: 170 m/min Maximum synchronous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeat accuracy: +/- 0.02 mm Product description of the Durma HD-F 3015 in 30 kW: Powerful and Efficient: equipped with a 30 kW fiber laser, the Durma HD-F 3015 offers outstanding cutting performance and precision for a wide range of materials, including steel, aluminum and copper. Spacious work area: With a work area of 3000 x 1500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC control: The user-friendly and precise control allows for easy handling and optimizes cutting paths to minimize material waste. Automatic nozzle changing system: This feature increases productivity and reduces downtime when changing cutting nozzles. Energy efficiency: The laser is characterized by high energy efficiency, resulting in lower operating costs. Robust design: The machine impresses with its durability and reliability, even under demanding working conditions. Safety: Comprehensive safety functions ensure safe operation. Versatility: Compatible with various laser cutting software solutions, it is suitable for a wide range of industries. Rsdpfxoq Nl T To Airsch Durma Maschinen GmbH - your reliable partner: As the manufacturer of the Durma HD-F 3015, we, Durma Maschinen GmbH, pride ourselves on our fast and efficient service and our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure that our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting needs. Interested in the Durma HD-F 3015 in 30 kW? Contact us for a no-obligation consultation or a customized quote. At Durma Maschinen GmbH, we will be happy to answer all your questions and find the best solution for your needs. We look forward to your inquiry!

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the Rcodeidunvopfx Airoh cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 3,700 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, It's time to enhance your production efficiency by 1.5 times! The Wattsan 1530 Tablechange laser metal cutter can operate materials as thick as 15 mm. It can handle stainless steel, carbon steel, galvanized steel, copper, aluminium, and titanium. This CNC laser cutter for metal has two working tables that measure 1500x3000 mm, which can replace each other. The loading rollers of the accurate Wattsan 1530 facilitate material input. Overall, it improves manufacturing efficiency by eliminating the need to waste time loading and uploading items. You can give our managers a call for additional details! Rsdpfx Aijiicv Sjrjch Wattsan 1530 Tablechange characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Weight: 3600 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 2,000 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, This laser metal cutting machine can operate sheet material with a thickness up to 12 mm. Wattsan 1235 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working space of 1300x2500 mm. The loading rollers of the precise Wattsan 1325 S make material feeding easier. The S-series laser metal machine has a maximum travel speed of 120 meters per minute. Laser power can be up to 6 kw. The bed here is made of steel. You can give our managers a call for additional details! Wattsan characteristics Working area: 1300x2500 mm Laser power: up to 6000 W Weight: 1640 Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Rsdpfxsiicwzj Airsch On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.