Used Copper for sale (514)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar Hsdpfx Aiozx D Tcsrsw TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,200 h, functionality: fully functional, Offered: Sinker EDM machine genius750NOVA + connection Chameleon Linear Hjdpfx Aezzawpoirsw - 120 electrode positions - 6 pallet positions 400x400 Sinker EDM machine genius 750 NOVA Right-hand configuration Control panel on the right, automation possible from the left side! * Travel ranges X * Y * Z: 420mm * 420mm * 400mm * Work table: 600mm * 600mm * Work table T-slots: number / width / spacing: 6 slots / 10mm / 83/100/100/100/83 * Controlled C-axis with n = 45 1/min * High retraction speed due to acceleration of 10 m/s² in Z and 20 m/min travel speed Generator * genius IPMtec, with comprehensive technology package for graphite, copper, and tungsten copper for machining all materials commonly used in tool and mold making * max. working current 52A, optional 100A or 196A (with 96A booster) Control system * Internal control computer with 1.2 GHz RISC CPU, 64-bit * Industrial PC with user interface, based on Win 10 * 22“ touchscreen, keyboard, mouse and handheld unit for setup with joystick, handwheel and touch display * Connections: LAN, USB, RS-232 Connection values * Electrical: 6 kVA, 400V, 50Hz * Pneumatic: 6 bar, 10 l/min * Required cooling capacity: 4.5 kW for cooling of dielectric fluid and control cabinet Chameleon base unit consisting of: * Robot * ZK’s own robot controller * 1 guide rail * 1 base magazine without magazine levels with rack and pinion drive Chameleon expansion magazine including base plate and glass sliding door set (magazine positions not included)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 36,167 h, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 4,000 mm, table width: 2,000 mm, workpiece weight (max.): 1,850 kg, type of cooling: water, overall weight: 1,10,000 kg, total length: 12,600 mm, total width: 1,080 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Prima Power Laser Genius LGf 2040 – 4 kW – Year 2019 For sale: Prima Power Laser Genius LGf 2040, a high-performance fiber laser cutting machine manufactured in 2019, with a laser power of 4,000 W and a working format of 4,000 × 2,000 mm. This Italian-made machine is equipped with linear motor technology, providing high travel speeds, excellent dynamics, and high precision. The Laser Genius series is designed for intensive industrial production and cutting of carbon steel, stainless steel, aluminum, copper, and other metals. Key technical data: Manufacturer: Prima Power / Prima Industrie S.p.A. Model: Laser Genius LGf 2040 Year of manufacture: 2019 Serial number: Z3.03.02.09 Technology: Fiber laser Laser power: 4,000 W / 4 kW Working area: 4,064 × 2,032 mm Z-axis stroke: 150 mm Maximum X/Y speed: 200 m/min Maximum simultaneous speed: 240 m/min Hsdpfx Aiezz N Dforjw Positioning accuracy: 0.03 mm Repeatability: 0.03 mm X/Y drive via linear motors Automatic table exchange system Approximate machine weight: 11,000 kg Approximate maximum cutting capacities with 4 kW: Carbon steel: up to 20 mm Stainless steel: up to 15 mm Aluminum: up to 8 mm Copper: up to 8 mm The machine stands out for its large format of 2,000 × 4,000 mm, high dynamics, and precision, making it a particularly suitable solution for industrial sheet metal production. Machine available for inspection. More information, photographs, operating hours, and additional equipment are available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Stainless steel: 20mm Aluminum: 20mm Copper 8mm Hjdsmzbkropfx Airew Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Eddy current non-ferrous metal separator type EIS 1000 S, supplied by Panizzolo (Italy), with Panizzolo vibrating feeder. For separating aluminium, copper and other non-ferrous metals from plastics, rubber, wood and inert materials. Technical data: – Type: EIS 1000 S – Belt width: 1,000 mm – Panizzolo vibrating feeder with OLI 1.1 kW vibration motor – Power supply: 3 × 400 V / 50 Hz Electrics: – Separate control cabinet with Schneider ClimaSys cooling unit Hedpfoz I Itcex Airjw – 2× Schneider Altivar Process frequency inverters (variable speed) – Control panel with touch display, main switch, emergency stop Scope of delivery: separator, Panizzolo vibrating feeder (OLI 1.1 kW vibration motor), control cabinet. By arrangement, an older non-working separator from the same supplier can be included as a source of spare parts. Condition: in working order, separator and feeder tested running. Inspection and test run by appointment on site. Loading onto truck on site. Sold as is, price net plus VAT.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 133/SCS, cutting speed: 35,000 mm/min, working width: 1,250 mm, feed rate X-axis: 35 m/min, product width (max.): 1,250 mm, number of straightening rollers: 7, We are offering a very well-maintained Krasser CENTURIO 1250 stand-alone slitting line, manufactured in 2023, for sale. Highlights Reinforced 7-roll leveling unit Max. coil width 1,250 mm Cutting speed up to 35 m/min Suitable for longitudinal and transverse cutting as well as leveling of strip steel Modern control system with touch operation Very well-maintained condition Ready for immediate use Technical data Manufacturer: Krasser Model: CENTURIO 1250 Type: Stand-alone slitting line Year of manufacture: 2023 Condition: Very good Max. coil width: 1,250 mm Min. coil width: 250 mm Description The Krasser CENTURIO 1250 is a powerful sheet metal cutting system for the precise processing of steel, stainless steel, aluminum, copper, and zinc sheets. The reinforced 7-roll leveling unit is particularly noteworthy, as it enables excellent leveling quality and reliable processing of a wide variety of materials. The system is currently still in operation and can therefore be inspected at any time by appointment while running. This offers interested parties the opportunity to directly verify the condition, performance, and functionality of the machine. The machine is expected to be available in the first quarter of 2027. The exact date may vary slightly depending on the project, but we currently anticipate a release around February 2027. Hedpfxszvgbqj Airsw Early reservation or coordination of the delivery date is possible and desirable. Contact For further information, technical details, or to arrange a viewing appointment, we look forward to receiving your message or call. Category ID: 1052 Type ID: 136 Type: Slitting line

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Hsdozzw Iropfx Airew Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm With loading and unloading system for the sheets

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter Hsdpfxjz Rl Hys Airow - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Year of construction: 2022, condition: good (used), Water table for copper separation – capacity approx. 700 kg/h For sale: used water table for copper separation, including from shredded cables. The capacity is approximately 700 kg/h and depends on the type of material being processed. The equipment includes a table, a spraying system, and a control cabinet, as shown in the photos. The current condition is depicted in the photographs. Hsdpsz E Nhiofx Airsw Price: 15,000 EUR Location: Rogówko, Kuyavian-Pomeranian Voivodeship Contact: 515 073 538 Feel free to contact us. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) Hjdpfjznwu Ssx Airew - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Hedpfx Ajzg U Aksirsw Z-axis: approx. 110 mm (4.33") Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Z: ball screw Resonator power: 6 kW Maximum cutting thicknesses For the 6 kW version: Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration collision sensors dust extraction intelligent cutting process monitoring

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction Hodpoz Rl Eiofx Airow - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: like new (used), Year of construction: 2025, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 800 mm, table length: 1,200 mm, Machine type: Sinker EDM Manufacturer: ONA Model: IRIS6 Year of manufacture: 2025 Condition: Like new – demonstration machine. Hedpfxoy D R Sfo Airow Technical data Travel range of the X-axis: 1000 mm Travel range of the Y-axis: 600 mm Travel range of the Z-axis: 500 mm Table length: 1200 mm Table width: 800 mm Description Demonstration machine in the showroom – not used in a production cycle. Ona Iris 6 X: 1000 mm Y: 600 mm Z: 500 mm C-axis 360° Positioning resolution: 0.001 mm XYZ positioning resolution: 0.0001 mm Feed rate: 3000 mm/min Feed rate: 18000 mm/min Working tank dimensions: 1700*1000*600 mm Door type: automatic drop-down door Table dimensions: 1200*800 mm Maximum dielectric height: 565 Maximum workpiece height: 515 Distance between the head and the table without the C-axis is 800 mm, and with the C-axis – 760 mm Maximum electrode weight: 50 kg Maximum table load: 4000 kg Machine dimensions: 3300 x 3370 x 2930 mm Machine weight: 7400 kg 21-inch color TFT touchscreen display Generator: 100 A Maximum material removal rate with copper mm3/min: 550 Maximum material removal rate with graphite mm3/min: 660 Volumetric consumption of copper: < 0.10% Volumetric consumption of graphite: < 0.05% Filtration system: environmentally friendly ONA filter with long service life and no cartridges – self-cleaning Flushing: through the central tool holder / tank – both programmable in the range of 1–31 Additional equipment installed on the machine: - precision pressure rulers - central automatic lubrication system - C-axis + automatic Erowa ITS 100 chuck - machine head prepared for fume extraction - 9-position automatic tool changer - CNC access to shared files in Windows networks - file sharing of machine files in Microsoft Windows networks - 1650 liters of ONA dielectric fluid - ISL function – online diagnostics - dielectric cooler matched in performance to the 100A generator - 3 mm measuring probe

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Hodpez D D N Eefx Airow Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,840 mm, total width: 4,200 mm, total length: 10,840 mm, overall weight: 73,500 kg, Oskar Frech GmbH & Co. KG Cold chamber die casting machine DAK 1600-133 and additional equipment The system is used for the production of die castings made of aluminum, magnesium, or copper alloys, which are manufactured using the cold chamber die casting process. Clamping force 16,000 kN Clamping stroke 1,200 mm Casting volume 3,014 – 12,057 cm³ Total weight of the system 73,500 kg Dimensions of the system Length 10,840 mm Width 4,200 mm Height 3,840 mm Hsdpoz Eblaefx Airow The system is equipped with the following additional units: Metering furnace, manufacturer Westomat, type 1700 S, capacity 1,700 kg Mold release spray system, manufacturer Gerlieva, type GS 1600/1800 T Metering furnace, manufacturer Meltec AVDF 1800/10 K, consisting of an aluminum melting furnace and a vacuum metering unit. The entire system is designed to allow fully automated operation for die casting of workpieces when used in conjunction with automation components. All necessary interfaces for communication and monitoring are available. Oskar Frech GmbH & Co. KG is one of the leading manufacturers of die casting machines worldwide. The DAK 1600-133 is the largest machine in the smallest series currently manufactured by Frech. Automation of the die casting system, manufacturer Frech, type DAK 1600-133, using an automation cell, manufacturer Reis. These units are primarily used for removing the workpieces produced by the DAK 1600-133 die casting machine.

Condition: used, Year of construction: 2019, For sale: Bystronic ByStar Fiber 3015 high-performance fiber laser cutting machine equipped with a powerful 12 kW fiber laser source and automatic ByLoader 3015 loading system. Designed for high-speed, high-precision sheet metal processing with excellent productivity and automation. Available : 2026 The machine can be inspected under power and demonstrated in operation by appointment. Technical Specifications Manufacturer: Bystronic Model: ByStar Fiber 3015 Laser Type: Fiber Laser Cutting hours : 14.324h Laser Power: 12 kW (adjustable from 1.2 to 12 kW) Sheet Size: 3,000 × 1,500 mm Working Area (X × Y × Z): 3,100 × 1,580 × 100 mm Maximum Positioning Speed: 120 m/min (X/Y), 170 m/min simultaneous Positioning Repeatability: ±0.025 mm Maximum Workpiece Weight: 1,100 kg Shuttle Table Changeover Time: 25 seconds Average Power Consumption: Approx. 27 kW (including extraction and chiller) Options BeamShaper Power cut Parameter wizard Hjdpfxoz Sd Imo Airsw Maximum Cutting Capacities Mild Steel: up to 25 mm (up to 30 mm with BeamShaper option) Stainless Steel: up to 30 mm Aluminium: up to 30 mm Brass: up to 15 mm Copper: up to 12 mm Maximum cutting capacities may vary depending on material quality and machine condition. ByLoader 3015 Automatic Loading System Sheet size: 3,000 × 1,500 mm Sheet thickness: 0.8 – 25 mm Maximum sheet weight: 890 kg Enables automated loading and increased production efficiency Dimensions & Weight Machine Dimensions (L × W × H): Approx. 11,900 × 5,700 × 3,200 mm Machine Weight: Approx. 11,000 kg (excluding extraction system and conveyor) Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Bystronic Model: ByStar Fiber 3015 Laser Type: Fiber Laser Sheet Size: 3,000 × 1,500 mm Positioning Repeatability: ±0.025 mm Cutting hours: 14.324h Available: 2026

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Hedez Ng N Tjpfx Airjw A self-contained, dedicated tooling system designed for a specific operation within an automated production line. It features a robust, open central frame and standardized, heavy-duty mounting units. The tool directly interfaces with industrial robots in a thermal hazard zone, incorporating advanced installation safety features and a dedicated system for dissipating stray currents. COMPONENT LIST: 1. DESTACO brand main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle indicator (range 5-135°) to facilitate collision-free loading. 2. Eye bolts (lifting lugs) – 4 pieces. 3. Copper grounding blocks (welding grounding) – approximately 2 connection points. Thick copper connections protect the electronics and positioner bearings from welding current. 4. Electro-pneumatic junction box (I/O connection box) – 1 piece. A collective housing for signals from inductive sensors, facilitating communication with the PLC controller. 5. Base blocks (NC blocks) with an X, Y, Z coordinate plate – approximately 25 pieces. Base pillars (so-called shims) guaranteeing perfect spatial positioning of the part. 6. Pneumatic installation in red protective sleeves – a complete supply line hidden within fire-resistant covers, safely routed inside the profiles and through edge feedthroughs. 7. Base frame with a process stand – 1 set. Consists of a galvanized working frame and a black service stand for offline maintenance tasks.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 282015 SDU8300, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 8 m/min, spindle speed (max.): 45,000 rpm, table width: 1,500 mm, table length: 1,000 mm, total height: 2,200 mm, total width: 2,800 mm, total length: 1,950 mm, type of input current: AC, input voltage: 400 V, spindle motor power: 6,000 W, CNC machine for powerful machining. The steel/granite sandwich construction for the moving axes, such as the gantry and cross slide, can optionally be driven by AC servomotors via ball screws or by linear motors. In conjunction with high-precision linear guides, it forms the basis of the massive steel/granite machine construction. The advantages of natural stone granite combined with high-strength, lightweight metal offer the highest stiffness while simultaneously reducing weight. This is the only way to achieve the desired dynamics and high feed rates. High-frequency spindles with up to 6.0 kW and 45,000 rpm with HSK25 / HSK32 tool holders are used as milling spindles. The 18-position tool changer (expandable to 36 tools), installed outside the working area, automatically moves from the protective housing to the milling spindle. With the 4th/5th axis designed as a swivel head and the integrated, high-precision gear drive modules, almost all positions of a complex workpiece can be reached with the milling tool. The machine is completed with new, state-of-the-art CNC control functions and an easy-to-use user interface. This allows for 5-axis simultaneous machining via RTCP (Rotation Tool Center Point) function. The control and operating components from Heidenhain include a touchscreen monitor and a comfortable handwheel. Different workpiece clamping systems can be mounted on the universal granite table via steel threaded bushings in a 150x150 mm grid. -Innovative steel/granite sandwich construction -State-of-the-art control technology based on Heidenhain -Automatic tool changer with tool measurement/inspection Hedpfx Aiozzzylsrow -Optionally with high-dynamic linear motors or ball screw drives -4th/5th axis as a swivel head or rotary tilting unit on the machine bed -RTCP, TLC, axis kinematics and clamping position compensation -Metal/granite sandwich construction -Rotary/swivel swivel head (4th and 5th axis) -High-dynamic linear motors in the X and Y axes -18-position tool changer, expandable to 36 tools -Heidenhain® TNC640 high-end control -Tool measurement by tool setter or laser -3D edge probe -Modern control panel -Water cooling -Heidenhain® LMT TT160 / optional laser measurement -3D measuring probe -Handwheel -Minimum quantity lubrication -Tool holders Ideal for machining: Brass Aluminum Ceramics Plastic Copper

Year of construction: 2026, condition: new, ‼️NEW FEATURE – NOW WITH SIEMENS TOUCH SCREEN‼️ For improved operation and control! Leasing is also available! Always with linear monthly payments and no increased final installment! Term 36 months. Rate factor 3.0694% Term 48 months. Rate factor 2.3697% Term 60 months. Rate factor 1.9456% IMPORTANT‼️ Currently, there are machines from China being offered on various platforms. Most CE certificates are counterfeit, and there is no EU conformity. The electrical systems are also usually not compliant with German regulations. Several clients have contacted us, asking how it’s possible to obtain copper from these machines, as they only get shredded cable mixtures. Based on our own tests two years ago, we can confirm that these machines do not produce clean copper. Such machines are not permitted for use in Germany! German quality, CE certified with EU conformity, and available for live demonstration. We recommend buying locally here in Germany: German warranties, German laws, fixed prices, and German-speaking support in case of problems – all only with machines purchased from us. You are welcome to arrange a site visit to see our quality in person. Live demonstrations available! For all recycling needs, we have shredders and other recycling machinery in stock in Heilbronn! Here is our new, unique machine – a world exclusive, only available from us in Heilbronn. Water-cooled system. Very efficient, clean copper granulate: 99.7% purity. We are a German company operating under German law. Excellent quality with warranty and service. Our German-speaking skilled workers, all certified, can assist you at any time. We have our own trucks, service vans, and offer prompt support and advice. See for yourself on site – don’t just decide based on pictures or videos. We granulate ourselves and can demonstrate this live. S300 with water cooling and fan – developed and assembled in Germany by us. Hjdpfjp E Efcox Airew With our equipment, you can also separate radiator copper: Input: ➡️ Copper-aluminum radiators Output: ➡️ Separated copper and aluminum. Any iron parts and screws are separated via magnetic belt as their own fraction (pre-shredder required). Since we use our own machines for copper recycling, our systems are continuously modernized, optimized for long service life, and constantly improved. Maintenance, spare parts, modifications, and upgrades are provided by our trained staff! From stranded wire, extension cables, automotive cables, telephone cables, NYM cables – recycle it all with our machines! Granulation Plant S300 ➡️ For cables from 0.1–40mm ➡️ Up to approx. 250 kg/h input – meaning, with 50% copper content in the cable, you can recover 5kg of 99.7% pure copper granulate from 10kg of input, which can be sold at premium prices. ➡️ Total connected load: 24 kW ➡️ Including separation tables ➡️ 380-volt connection ➡️ UVV compliant, implemented by a German company ➡️ Conveyor belts included ➡️ Magnetic belt included (for steel separation) ➡️ Transport can be organized From €24,999.00 net +19% VAT €4,748.81 Gross €29,748.81 Subject to errors and prior sale.

Condition: excellent (used), Stainless steel ice cube machine Hedpfxo Ab E Svj Airjw 220 V 75 kg/day, nuggets, 32 kg storage container, air cooling 640 x 600 x 800 mm (W x D x H) Includes Britta water filter Purity 1200 Steam These filter cartridges reduce the carbonate hardness in tap water, thus preventing limescale deposits in the machine. In addition, heavy metal ions such as lead and copper, turbidity, organic contaminants, and other odor-causing substances such as chlorine residues are filtered out.

Condition: like new (used), Year of construction: 2003, TECHNICAL SPECIFICATIONS X axis travel: 1,500 mm Y axis travel: 750 mm Z axis travel: 500 mm Worktable height: 820 mm Hedpfx Aioxwma Aorjw Open height (clearance): 920 mm Maximum workpiece weight: 100,000 N Maximum load on head: 4,000 N Tank type: Fixed Tank dimensions: 2,300 x 1,300 x 700 mm Worktable size: 1,700 x 1,000 mm Usable dielectric height: 620 mm GENERATOR Standard minimum surface finish: VDI = 0 Power: 60 A MACHINE EQUIPPED WITH Generator with 120 A Expert System Fixed worktable 1,700 x 1,000 mm CNC for simultaneous axis control Integrated ONA C-axis with automatic System 3R Macro Standard chuck Eco-friendly filter with automatic cleaning cycle Dielectric temperature control system Year of manufacture: 2003 MACHINE FEATURES Fixed-table structure ensuring stable operating conditions, equipped with leveling supports Stabilized grey cast iron structure (base, column, tables) X-Y-Z movements via high-precision class A ball screws, driven by three DC motors Motion on prismatic roller guideways Position detection via linear glass scales Improved front accessibility with retractable front door system Fixed working tank Integrated C-Axis (mounted on the head) Maximum speed: 40 rpm Resolution: 0.001° Maximum load (static C-axis): 500 N Maximum load (dynamic C-axis): 120 N Heidenhain encoder Toothed belt transmission Maximum current without rotation: 120 A Maximum current with high-speed rotation: 60 A Maximum current with slow rotation (0–1 rpm): 12 A Moment of inertia: 2,000 kg/cm³ GENERATOR FEATURES Modular design Programmable parameters Maximum power: 60 A EXPERT SYSTEM Controls the entire erosion cycle, from roughing to final surface finish, automatically adjusting spark parameters to ensure maximum generator efficiency and highest machining speed. Dedicated software for deep ribs Dedicated software for finishing large homogeneous surfaces Fully unattended machining capability with maximum productivity and excellent final quality Process parameter monitoring via screen and control panel display Automatic anti-collision system preventing electrode damage in case of accidental contact with the workpiece TECHNICAL DATA Pulse duration (Ton): continuously adjustable from 1 to 6,500 microseconds Pulse interval (Toff): continuously adjustable from 1 to 6,500 microseconds Copper electrode volumetric wear: 0.2% Graphite electrode volumetric wear: 0.1% Surface finish Ra (CLA): 0.1 micron – VDI = 0 Maximum material removal rate: 600 mm³/min Power consumption: 10.7 kVA Current intensity: adjustable from 1 to 12 (manually or via program) Highly sensitive servo control system High erosion stability

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, Used LVD PHOENIX FL 3015 Fiber laser cutting machine in excellent condition for sale. This is a dynamic and versatile laser cutting machine designed for precise and fast cutting of various types and thicknesses of metal sheets. The reliable LVD construction, combined with the IPG Fiber laser source, ensures high cutting quality, performance, and low operating costs. The machine is fully functional and can be inspected and tested at our warehouse. Equipment: Automatic exchangeable work tables IPG Fiber laser source – 6 kW 10 kW laser cutting head LVD Touch-L control system Automatic focus adjustment Automatic nozzle changer Automatic nozzle calibration Hjdpjzhmtwofx Airow Automatic nozzle cleaning Nozzle magazine with up to 10 positions Automatic sheet position detection Automatic cutting gas selection (oxygen, nitrogen) Cooling system Fume extraction system Sheet cleaning comb Interface with sheet storage Technical specifications Manufacturer: LVD Model: PHOENIX FL 3015 Fiber Year of manufacture: 2017/08 Laser source: IPG Fiber Laser power: 6 kW Operating parameters Maximum sheet size: 3050 × 1525 mm X-axis travel: 3185 mm Y-axis travel: 1560 mm Z-axis travel: 130 mm Maximum table load: 750 kg Table change time: 35 s Maximum X-Y positioning speed: 140 m/min Repeatability accuracy: ±0.025 mm Maximum cutting thicknesses Structural steel (O₂): 30 mm Structural steel (N₂): 8 mm Stainless steel (N₂): 25 mm Aluminum (N₂): 25 mm Copper (O₂): 6 mm Brass (N₂): 12 mm Operating hours Power ON hours: 51,061 h Cutting hours: 24,262 h Application Ideally suited for sheet metal processing companies, metal structure manufacturers, ventilation system manufacturers, and manufacturers in the automotive, agricultural machinery, and other industries that produce precision metal products and require fast, accurate, and reliable laser metal cutting. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, functionality: fully functional, The semi-automatic circular saw TL-600-A is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (partially solid materials). The machine is characterized by its easy operation, quick and convenient material changes, and simple miter angle adjustment. The TL-600 A has a continuously adjustable miter range to the left and right up to 20° (swivel range of two times 70°). Technical data: • Cutting range: 90° round: 230 mm / square: 200 x 200 mm / rectangular: 500 x 50 mm 45° L/R: round: 230 mm / square: 160 x 160 mm / rectangular: 250 x 100 mm • Drive power 4.1 KW / 400 V / 50 Hz • Speed 3000 RPM • Cutting speed 55 m/sec • Blade dimensions 600 x 50 mm • Working height 970 mm • Max. cutting height 230 mm • Dimensions 1300 x 1220 x 1635 mm • Weight 500 kg Equipment: • Double miter 20° – 90° – 20°, large support plate, powerful drive motor • Two-button control for initiating the sawing cut (optionally also available as a single-button control) • Clear control panel • Adjustable blade/cutting feed Hjdpj Aft Rhefx Airjw • Two vertical and two horizontal pneumatic clamping cylinders • Hydropneumatic lifting of the saw blade, with oil level indicator • Fixed material support can be moved to the rear to increase cutting performance • Large protective cover, covers the entire work area • Minimal lubrication system with a 2-liter reservoir • Air gun for cleaning the machine • Saw blade ø 600 mm

Condition: used, Year of construction: 2022, Well-maintained Bystronic BySmart Fiber 4020 10 kW fiber laser cutting machine with a large-format 4,000 × 2,000 mm table. Equipped with the intuitive ByVision Cutting control system and suitable for high-speed, high-precision processing of steel, stainless steel, aluminum, brass and copper. Machine can be inspected under power by appointment. Additional pictures, videos and technical documentation available upon request. Key Specifications Hodszz A Nzspfx Airjw - Working area: 4,120 × 2,110 mm - Sheet size: 4,000 × 2,000 mm - Max. positioning speed: 140 m/min - Max. workpiece weight: 1,900 kg - ByVision Cutting touchscreen control - V2 laser cutting head - Incl. nozzle changer, beamshaper, detection eye en mixgas - Prepared for connection to an N₂ nitrogen generator Cutting Capacity - Mild Steel: up to 25 mm - Stainless Steel: up to 30 mm - Aluminum: up to 30 mm - Brass: up to 15 mm - Copper: up to 12 mm Machine Information - Operating hours: 11,650 h - Cutting hours: 3,900 h - Year of Manufacture: 2022 - Condition: Very good - Location: Eastern Germany - REC Care service contract, 2x annually Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Working area: 4,120 × 2,110 mm * Sheet size: 4,000 × 2,000 mm * Max. positioning speed: 140 m/min * Max. workpiece weight: 1,900 kg * Year of Manufacture: 2022 * Condition: Very good * Cutting hours: 3,900 h * Operating hours: 11,650 h * Location: Eastern Germany

Condition: good (used), Year of construction: 2002, machine/vehicle number: 526-02514, functionality: fully functional, DoALL 2013-V3, 2013-V3 Vertical contour band saw Manufacture DoAll sawing Products U.S. Year of manufacture: 08/2002 S/N 526-02514 CE marked Hjdpfx Aisu A Ikherew Variator drive Max. Working height 330 mm Maximum width up to the column 508 mm Capacity of the machine: b 20″ x b 13″ (508mm x 330mm) These vertical machines are one of the most versatile machines on the market! Vertical contour saws for cutting aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal as well as cutting plastics and fiber materials. They are also available with a variety of attachments that allow for cutting contours, slices and more. The 2013-V2 has the same main structure, capacity and features as the 2013-V3. The only difference is the power of the motor: 2013-V3: 2.2kW/3HP, 400V, 50 Hz Standard equipment One set of high-speed guide blocks with inserts for belts from 3 to 13 mm One set of steel guide inserts for belts of 6, 10 and 13 mm Belt speed indicator Removable chip tray Belt tension indicator Chip blower (requires factory air) Handwheel for lifting the column AC drive with variable speed (speed control, soft start and dynamic braking functions) Belt door interlocks Dual range gearbox Gear oil One bi-metal band saw blade Operating instructions and spare parts manual