Used Crank Shear for sale (2,147)

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Hodpfozku Hwex Afwefi Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T Hfjdpfx Aezku Hdsfwoi

Condition: used, Hydraulic Shear COMESSA type CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Hfsdpszku E Hsfx Afwoi Motor power: 35 CV Adjustable blades 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Hfodjzku Diepfx Afwji Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Condition: used, Year of construction: 2002, Max. Schnittlänge: 1270 mm Max. Cutting thickness: 4 mm steel Manual rear end stop with hand crank Hfjdpfx Aszfkmpsfwoi Cutting gap adjustment by handwheel Side stop and table extensions Weight: approx. 2000 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS • Punching force: 850KN / 85 tons • Punching: Ø40x15mm • Cuts per minute (stroke 20mm): 40 • Throat depth: 500mm • Stroke: 70mm Hedpfszg Dxbsx Afwofi • Cutting of L-shaped profiles at 90º: 120x120x10mm • Flat bars: 450x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 130x130x12mm • Bending: 200x12mm • Motor: 9KW • Net weight: 2500Kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, HYDRAULIC SHEAR LVD HD CS 31x13 Serial number: 34887 Year of manufacture: 2007 TECHNICAL SPECIFICATIONS Max. sheet thickness (St45): 13 mm Cutting length: 3100 mm Range of back gauge: 750 mm Min. cutting angle: 0.5° Max. cutting angle: 2.5° Min. number of strokes/min: 7 Max. number of strokes/min: 35 Hfodpfx Aszg Dp Tsfwoi Min. blade clearance: 0.05 mm Max. blade clearance: 2.2 mm Motor power: 15 kW Weight: 8700 kg OPTIONS: Electrical adjustment of back gauge (1000 mm) with digital readout. Electrical adjustment of cutting angle. Adjustable blade clearance. With 90° square arm front support. Foot pedal. CE safety standards.

Condition: good (used), functionality: fully functional, Year of construction: 1988, Profile steel shears Peddinghaus Peddycut 275, 6-way combination Immediately available ex works: Profile steel shears Peddinghaus Type Peddycut 275 Year of manufacture 1987 Pressing force 27 tons Table 400 x 250 mm Overhang 90 mm Capacity 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Hfjdpfszkg Rnsx Afwsi Square steel 25 mm Blade length 175 mm Punch stroke 24 mm Pierces 20 mm holes in 19 mm or 30 mm thick sheet metal Foot switch Bobmewfdbpsm Av Euedc Various punch dies Transport: ex works

Condition: used, Year of construction: 1975, cutting capacity 2,5 mm mm throat 750 mm Hfjdozfaylepfx Afwsi round blank diameter max. ca. 1500 mm weight of the machine ca. ca. 800 kg includes on set of new replacement tools

Condition: used, Manual guillotine shear Hedsy I U Acepfx Afwefi Type: Weingarten TH Condition: Used Technical data Cutting width: approx. 1070 mm Sheet thickness: 1.25 mm

Condition: good (used), design: Cutmatic strip width: max. 2.150 mm Hfedpfx Afowzvlxjwsi strip thickness: max. 6 mm

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm cutting thickness: max. 4 mm Hsdpfewzvntsx Afwsfi length stop range: 10 - 1.000 mm

Condition: good (used), Year of construction: 1992, EHT EHS 10-31 Hydraulic Plate Shear | 3,050 mm | 10 mm | Year of Manufacture 1992 For sale is a heavy-duty industrial hydraulic plate shear, the EHT EHS 10-31. This machine was manufactured in Germany by Eisen- und Hammerwerk GmbH (EHT) and is ideal for locksmith shops, metalworking companies, sheet metal processing, and general mechanical engineering. With a cutting length of 3,050 mm and a cutting capacity of 10 mm steel, this machine belongs to the classic 3-meter industrial class. The hydraulic clamp ensures secure workpiece fixing and clean cut edges. The programmable back gauge enables efficient operation during series cutting. Equipment Manufacturer: EHT Type: EHS 10-31 Year of Manufacture: 1992 Hydraulic plate shear NC back gauge Hydraulic clamp Hfedpfx Afeziuzrewsi Control panel with digital back gauge control Foot switch Cutting gap adjustment Cutting angle adjustment Machine lighting Robust steel welded construction Technical Data Feature | Value Manufacturer | EHT Model | EHS 10-31 Year of Manufacture | 1992 Cutting Length | 3,050 mm Cutting Capacity Steel (400 N/mm²) | 10 mm Cutting Capacity Stainless Steel | approx. 6 mm Back Gauge | NC-controlled Motor Power | approx. 18.5–22 kW Operating Voltage | 380 V / 50 Hz Rated Current | 24 A Main Fuse | 50 A Machine Weight | approx. 8,500–9,500 kg Condition Used Robust German industrial quality NC back gauge included Hydraulic system complete Sold as pictured Inspection and test run possible by appointment Areas of Application Sheet metal processing Steel construction Metal construction Mechanical engineering Tank construction Locksmith shops Contract manufacturing

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Hodpfozkgf Eex Afwofi

Condition: ready for operation (used), Year of construction: 2004, control type: manual, actuation type: hydraulic, working width: 2,050 mm, stroke rate (min.): 18 1/min, stroke rate (max.): 18 1/min, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 1,000 mm, power: 15 kW (20.39 HP), overall weight: 7,600 kg, total length: 2,400 mm, total width: 1,900 mm, total height: 2,000 mm, number of support arms: 2, Cutting length 2050 mm, cutting capacity 10 mm, motor 14,5 KW, working high 800 mm, back gauge 5-1000 mm motorised, 2 frontsupports, dimension 2700x1900x2000 mm, weight ca. 7600 kgs Hedpfx Afexx Sm Dowefi

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Hodpfxsv E Rm Hj Afwefi Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 4523, punching force: 80 t, sheet thickness steel (max.): 20 mm, Equipment: CE marking, foot remote control, IMS model HY 80 Hsdpfx Afozkwttswefi

Condition: new, Year of construction: 2026, neu 2026 Hodpfxjyz Dc So Afwsfi 090204 prompt, Zwischenverkauf v Türkei 4290 € 1 1250 mm 1.5 mm 500 mm 2250 mm 1000 mm 1150 mm 460 kg DEMO MACHINE - MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: new, Year of construction: 2026, neu 2026 Hfjdpfoyz Dc Eox Afwoi 090203 prompt, Zwischenverkauf v Türkei 3810 € 1 1020 mm 1.5 mm 500 mm 1950 mm 1000 mm 1150 mm 420 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: new, Hydraulic shear MVD 3100 X 6 mm complete with pneumatic sheet support at the rear Cutting capacity for 450N/mm2 material: 6 mm Cutting capacity for 700N/mm2 material: 4 mm Cutting length: 3100 mm Distance between uprights: 3330 mm Fixed cutting angle: 1.9° Sheet clamping cylinders: 14 Strokes per minute: 18–23 Throat: 250 mm Motor power: 10 kW Hodpfx Afjfh R Igjwsfi Graduated square and two sheet supports: 1000 mm Rear gauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 6000 kg

Condition: excellent (used), functionality: fully functional, working width: 2,060 mm, sheet thickness (max.): 3 mm, back gauge adjustment: motor-driven, Equipment: emergency stop, safety light barrier, Vimercati mechanical guillotine shear. Hedpfx Aoxdr R Tofwjfi - Cutting width: 2060 mm - Sheet hold-down cylinders: 11 units - Maximum cutting thickness for steel with Rm 410 MPa: 3 mm - Maximum cutting thickness for steel with Rm 600 MPa: 2 mm - Pneumatic rear sheet support Machine is currently in operation and fully functional. Equipped with motorized back gauge with manual control and display showing cutting dimensions. Machine comes complete with added safety guards and an operation and maintenance manual.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, ITALTECNICA Hydraulic Guillotine Shear Year of manufacture: 2003 CE. Usable cutting length: 3050 mm Maximum cutting thickness: 6 mm Programmable controller ESA TRIA 250 Adjustable cutting angle Hsdpfx Afsw T Tcqjwefi Motorized back gauge with pneumatic sheet support. Weight: 8,000 kg Motor power: 7.5 kW Safety guards included.

Condition: excellent (used), functionality: fully functional, control type: NC control, actuation type: hydraulic, controller manufacturer: ESA, working width: 3,050 mm, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, type of input current: three-phase, Equipment: emergency stop, finger protection, foot remote control, type plate available, OLEOTECNICA hydraulic guillotine shear Working cutting length: 3050 mm Maximum cutting thickness: 4 mm ESA programmer for dimension display Hjdpfjyqwhfjx Afwjfi Motorized backgauge Safety guards.

Condition: new, Year of construction: 2024, Hydraulic shear MVD I-SHEAR C 3100 – 10 complete with pneumatic sheet support at the rear. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC BLADE GAP ADJUSTMENT Cutting capacity for 450N/mm2 material: 10 mm Cutting capacity for 700N/mm2 material: 6 mm Cutting length: 3100 mm Distance between uprights: 3600 mm Variable cutting angle: 0.5 - 3° Hfjdpfx Aofh R Ilofwei Sheet clamping cylinders: 14 Strokes per minute: 7 – 13 Throat: 250 mm Motor power: 22 kW Graduated square and two sheet supports: 1000 mm Rear gauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 10.5 tons

Condition: ready for operation (used), Mechanical shear FE.MAR Cutting length: 2000 mm Cutting thickness: 3 mm Motorized rear register. Hfedpfxewm Er Eo Afwoi Steel base. Front sheet metal supports.