Used Crankshaft Turning Lathe for sale (9,356)

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Kwodox Ik Tdspfx Abcsw subject to prior sale!

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t Kwedpsx Ik Twsfx Abcjw nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck Kwedpfx Ajx I Simobcsw - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft * Kwsdpow Dufisfx Abcsw

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, bar passage: 32 mm, The following work has been carried out on the machine in recent years: June 2023 – Counter spindle motor replaced July 2023 – Counter spindle tachometer replaced November 2023 – Ti axis cable replaced Kedpfxeyux I Ie Abcoww November 2023 – Ti axis motor replaced June 2024 – Hard drive replaced July 2024 – complete NC TECHNICAL DETAILS Bar capacity: 32 mm EQUIPMENT 10 tool stations on turret with Y-axis for front and rear machining 5 gang tool positions 3 tool stations on drilling block for rear machining 4 driven tools for cross machining C-axis main spindle Milling interpolation Cutting radius compensation Synchronous tapping ER16 tool holders

Condition: used, Year of construction: 1995, functionality: limited functionality, bar diameter (max.): 75 mm, cnc old machine spindle hole 75 mm Kjdpfx Aboyv Uplscoww

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Kwedpfsxdmgvox Abcsw Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 1990, 2 UNITS available CONTROL FANUC 0 CNC Lathe Technical details: Turning diameter 165 mm Turning length 200 mm Control Fanuc 18 TB X-axis 2x 195 mm Z-axis 265 (B 780) mm Bar passage 50 mm C-axis 0,001° Turning speeds: 50-5.000 U/min Tool turret with 12 work positions 2 Kodpfsd S U Dgox Abcsww x12 Turning speeds : 180-3600 U/ min Accessories: Chip conveyor

Condition: used, Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, We offer a used face turning lathe PORĘBA TR-100C in good technical, fully working condition. Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm Kjdpeydpvzjfx Abcoww width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Kedpfx Abew Uf Hwsceww Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: good (used), Year of construction: 2012, operating hours: 22,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Brand: STAR Model: SR-32J Year: 2012 Kjdpfoyu Uhwsx Abcjww with: FANUC 32i control Backworking unit Synchronous spindle Driven tools C-axis Oil mist extraction system Fire suppression system FMB TURBO 3-36 bar feeder

Condition: good (used), Year of construction: 2013, operating hours: 35,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type lathe Make: STAR Model: SV-32 Year: 11/2013 with: FANUC 16i TB control backside machining synchronous spindle turret driven tools C-axis high-pressure pump fire extinguishing system chip conveyor bar feeder magazine FMB TURBO 3-36 Kedpfx Ajyu Nqyobcsww

Condition: excellent (used), Year of construction: 1986, Max. turning diameter over bed: 300mm Max. turning diameter over rear slide: 250mm Max. turning length: 630mm Ksdsyt Spvspfx Abcsww Distance between centers: 1000mm

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm Kwjdpfx Abjvh I Tvjcow control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min Kwjdpfjyh Ivljx Abcow - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm Kwodpfsyh Hkzjx Abcjw - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) Kedpsytn Emofx Abcsww WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10637 Manufacturer: DOOSAN PUMA Type: 480XLM Year of construction: 2012 Type of control: CNC Control: FANUC 32iA Storage location: Halberstadt Country of origin: Korea Bar passage: 165 mm Turning Length: 992 mm Spindle Bore: 181 mm Max. Turning diameter: 900 mm Max. machining diameter: 650 mm Spindle motor drive: 45 kW Turret places: 10 Pcs Machine length: 7000 mm Machine width: 2310 mm Machine Height: 2440 mm Weight Of The Machine Ca.: 12800 t Swivel range: 900 mm spindle: 1500 RPM Turning Speeds: 1500 RPM Further information: - 3-jaw power chuck - Programmable tailstock - Chip conveyor Kwedpeyr H I Rjfx Abcjw - Cooling - SMW SLU5 hydraulic steady rest The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2020, operating hours: 7,341 h, functionality: fully functional, CNC Swiss-type automatic lathe Make: STAR Model: SX-38 Type A Year: 2020 Equipped with: FANUC 31i Model B5 control, synchronous spindle, powered tools, Y2-axis, Y3-axis, 2x C-axis, X2-axis, X3-axis, B-axis (programmable on linear carrier), independent back machining (8 stations), turret, swarf conveyor and swarf trolley, parts conveyor belt, Ksdpfx Abox Sx T Tjcjww fire extinguishing system, oil mist extraction, JBS guide bushing unit, can be used as both long and short turning machine, high-pressure pump, bar feeder FMB TURBO 5-65

Condition: used, TORNOS MULTIDECO 20/6b is a CNC Multi-spindle turning lathe engineered for high-precision machining with excellent accuracy and reliability. Key capacities: 17 axes total, 6 cross slides, 5 plain turning slides, longitudinal carriage way 160 mm, 6 spindles + 1 back spindle, round bar capacity Ø 5–20 mm, max workpiece length 100 mm, production rate 45 pcs/min. Technical specs: stepless spindle speeds up to 5000 rpm, spindle power 15 kW, total installed power 43 kVA, supply 3x 400 V 50 Hz, machine weight ≈8500 kg, dimensions L3500×W1600×H1950 mm. Equipment: ROBOBAR bar feeder type MSF 522/6, coolant system, chip conveyor, pick-up spindle, spindle stop device, lamp and status light. Delivers tight tolerances; suitable for automotive, watchmaking, toolmaking, aerospace and medical industries. Ksdpfx Ajytuxmobcjww

Condition: used, Year of construction: 2005, functionality: fully functional, TECHNICAL DATA Spindle Head Max. bar stock diameter (mm): 13.0 Material quality (DIN 671) (mm): Ø Xh9 Collet chuck, selectable: Through-bore Guide bush, selectable: Through-bore Max. turning length / spindle stroke: • with fixed guide bush (mm): 130 • with rotary guide bush (mm): 80 • with programmable guide bush (mm): 80 Spindle speed (rpm): 12,000 C-axis electronic resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 Slide travel X1 (mm): 35 Slide travel Y1 (mm): 38 (-10 +28) Rapid traverse X1 / Y1 (m/min): 15 Tool stations (number): 6 (12) Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Carrier 2 Slide travel X2 (mm): 35 Slide travel Z2 (mm): 50 Rapid traverse X2/Z2 (m/min): 15 Tool stations (number): 6 Turning tool cross-section (mm): 8x8 or 12x12 Kjdsyr N Dzspfx Abceww Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Drive for Tool Carrier 1 and 2 Speed (rpm): 0...8000 Max. driven tools (number): 2x6 Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Unit Max. bar stock diameter (mm): 13.0 Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 | 228 Rapid traverse Z3, Z4 / X3 (m/min): 30 Tool stations (number): 4 Spindle speed (rpm): 12,000 C-axis electronic resolution (deg): 0.001 Rear Tool Unit, Slide/Fix Stroke Z, slidable with working spindle (mm): 80 Tool holder diameter (mm): 20 Tool stations (number): 3 Rear Tool Unit (X4-axis) Stroke X4 (mm): 39 Rapid traverse speed (m/min): 15 Tool holder diameter (mm): 28 Tool stations (number): 4 Tool Drive for Rear Tool Unit (with X4-axis) Speed (rpm): 0...10,000 Max. driven tools (number): 4 Clamping diameter for drilling tools: • driven (mm): 0.5 - 7 • stationary (mm): 0.5 - 10 Coolant System Pump pressure single stage (bar): 3 120 bar pump for front/rear unit Tank capacity (l): 180 Delivery rate (l/min): 40

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm Kjdpfx Abolzm Eqscjww turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: good (used), Year of construction: 2007, feed length X-axis: 6,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. Kjdpfx Abjyvy A Docsww - Feed unit exchanged.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Citizen CINCOM M12 – Swiss / Sliding Headstock automatic lathe Rok produkcji maszyny: 1999 Rok produkcji podajnika: 2009 Technical data: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW Kjdpfxsyt D Azj Abcoww • Counter spindle speed: up to 10,000 rpm • Number of axes: 7 (C-axis on both spindles) • Machine weight: 2,580 kg • Control: CNC Cincom / Mitsubishi M6 • C-axis and driven tools – milling, drilling, threading possible Equipment: • LNS Tryton 112 • Guide bushings • Live tools • Set of fixed holders • No chip ejector M12 number of axes X1, Y1, Z1, X2, Z2, X3, Z3, C1, C2 Tool list: Gang tool post: T1-T5 fixed tools T6-T8 driven tools (holders included) Turret: T20-T29 fixed or live tools, possibility to install more than one tool per station. Backspindle tool post: T41-T43 fixed tools, no possibility of installing driven holders Technical condition: The machine is in very good condition, after technical inspection, ready for immediate operation. Application: Precision automatic lathe for serial production of small turned parts from Ø 1–12 mm bar stock. Additional information: • Full documentation available and possibility of voltage testing. • Transport and loading at the buyer's request.

Condition: excellent (used), Year of construction: 2002, Control: Siemens SINUMERIK 840D, C200-4D Spindle speed: 6000 rpm Travel X/Y/Z: 280/280/145 mm Number of turrets: 1 with 6 positions Number of tool stations: 2x4 Chip conveyor Pallet conveyor belt Kodpfjyp Icwox Abcsww Pallets