Used Crank for sale (618)

Condition: new, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 906 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times Iedsy Dmu Njpfx Amyoib * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: excellent (used), functionality: fully functional, mileage: 5,53,123 km, power: 536.91 kW (729.99 HP), first registration: 07/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, lane keeping assist, low noise, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, SCANIA R730 *V8* / Premium and luxury packages ! TOP equipment ! 2-Pieces in stock / 2-Pieces in stock ! Equipment details: Engine: 730 HP Euro6 Transmission: OPTICRUISE (Kickdown Opticruise) Eco-Roll function Opticruise shift program Economy, Standard, Power Turbocharger reinforced SCANIA RETARDER Differential lock PREMIUM long-distance cab equipment Aerodynamic tractor unit Wind deflector LED EQUIPMENT Black PREMIUM driver's seat + passenger seat with V8 embossing DRIVER'S SEAT VENTILATION (seat climate) + heating Extendable lower bed 800-1000mm Wood/leather steering wheel with airbag Driver's side airbag Black leather door trim Luxury dashboard design Backlighting below the dashboard Dashboard passenger side with table Dashboard woodgrain trim Premium instrument cluster Infotainment system Premium 7'' display Infotainment voice control STANDBY AIR CONDITIONING SYSTEM Scania original Extra cab heating water/air 3kW Air conditioning Air conditioning and heating system LED headlights LED fog lights 3-diode LED daytime running lights + position/marker/outline/indicator LED tail lights LED work lights on rear wall of cab High beam headlights in front grille Cab suspension air comfort Double-glazed door window WSS tinted Roof spoiler height-adjustable manually with crank ALCOA DuraBright alloy wheels with MICHELIN tires Special paint finish frame + plastic parts Front grille paint V8 black (Ebony/Black Brilliant) Contrasting black door/side panel (glass) Aluminum checker plate cover up to fifth wheel coupling Aluminum checker plate tool box, right on frame Frame special paint finish + plastic parts Additional interior fittings: Engine tunnel cover Black leather trim Electric roof hatch incl. mosquito net Roof liner backlighting Backlighting cab rear wall Ambient interior lighting Side sun visor inside driver's side Roller blind Black leather floor mats Side AIRBAG driver's side Equipment packages: Premium infotainment package with NAVIGATION 7'' display and driver package Premium driver package with armrest (Opticruise) Seat upholstery package LEDER black MCC Underline package 2 with side trim Safety package with assistance systems Comfort package CR cab Light package Isdpjq H Tgtsfx Amyjib Climate system package Air conditioning+ Premium + with heating Assistance systems: Assistance systems Scania AEB (Emergency Brake Assist) + Scania LDW (Lane Departure Warning) + Scania ACC (Adaptive Cruise Control) Scania AEB (Emergency Brake Assist) Scania-ACC (distance control) Scania-LDW (Lane Departure Warning) Communication: Infotainmant System Premium 7'' display Infotainment voice control Map data Europe Bluetooth for radio Infotainment switch in the steering wheel Speakers Premium Version 4x20W Dual Coil Radio with DAB (Digital Audio Broadcast) Cell phone preparation Speedometer remote download (switch) Scania Comunicator C300 etc. ... VA tires: 385/65R22.5 ...MICHELIN... HA tires: 315/80R22.5 ...MICHELIN... 1st owner / 1st owner SCANIA Servicegepflegt / SCANIA Service maintained ! für weirere Info's / for more Info Mobile-Tel.: +43 664 4477030 Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We take care of all customs matters for you. Where to put the used car? ...if you agree, we will be happy to trade it in. The offer is non-binding and subject to change. Subject to errors and prior sale.

Condition: used, Column Drill Gillardon Type GSB 32 V Machine No.: Year of manufacture approx. 1975 Drilling capacity: 32 mm Taper: MK 4 – long quill Throat: 350 mm Quill travel: 170 mm Table size: 570 x 470 mm Column diameter: 140 mm Spindle speed Motor speed step 1, Belt step 1: 50 – 300 rpm, stepless Spindle speed Motor speed step 2, Belt step 1: 100 – 600 rpm, stepless Spindle speed Motor speed step 1, Belt step 2: 100 – 500 rpm, stepless Spindle speed Motor speed step 2, Belt step 2: 150 – 1000 rpm, stepless Motor power: 1 / 1.5 kW Iiodpfxeyhf Ize Amysb Power supply: 380 Volt, 50 Hz - automatic feed approx. 0.1 / 0.16 / 0.25 mm/rev, 3 steps - spindle speed via 2 motor speeds, 2 V-belt stages and variator gearbox - adjustable drilling depth stop - table height adjustment via rack and hand crank - tiltable drilling table with angle scale - drill chuck RÖHM Ø 1 to 13 mm - machine lamp Required space (L x W x H): 1000 x 750 x 2000 mm Weight: 470 kg Good condition

Condition: used, mileage: 8,36,000 km, power: 294 kW (399.73 HP), first registration: 01/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment and technical data of the MAN TGX 18.400 4X2 BLS Cab: Medium-height high roof 'XLX' (2440 mm wide, 2280 mm long) * Comfort Package 1 Driver * Infotainment Package Plus * Basic Safety Package Electronics and Infotainment * MAN Tronic (onboard computer) * Radio: MAN Media Truck Advanced 12V with navigation * MAN Sound System Ijdpey Dzggjfx Amyeib * MAN Tronic (onboard computer) * Navigation SD: Western Europe * Hands-free functionality for 1 mobile phone (MFL and Bluetooth® compatible) * AUX-in/USB in dashboard * Infrared remote control for MAN radio * CB radio system * Instrument cluster: km/h 'High-Line' * Steering wheel: height and tilt adjustable * Seat covers: comfort quality * Driver comfort seat: air-suspended with lumbar support, shoulder adjustment and heating * Passenger seat: static, adjustable length and backrest * Auxiliary air heater: EBERSPÄCHER D4S * Air conditioning: AC R134A CFC-free with automatic temperature control * Sleeping bunks: 2 units with storage (aluminum frame), upper and lower mattresses * Refrigerator: Yes * Drawers: 2 extendable in center part of dashboard * High beam and fog lights also with cornering light * E Halogen twin headlights H7 for right-hand traffic * Work light on right mudguard bracket Registration and Loads * GVW: 18,000 kg / 20,500 kg / 20,500 kg * 1st front axle: 7,500 kg / 7,500 kg / 7,500 kg * 1st rear axle: 11,500 kg / 13,000 kg / 13,000 kg * Wheelbase: 3600 mm * Rear frame overhang: 800 mm * Engine: D2676LF47 – 400 HP / 294 kW EURO6 SCR-1900Nm (2100 with TopTorque) * Transmission: MAN TipMatic® 12 21 DD with professional software (road use) * Fuel tanks: Aluminum 580l right, 580l left, 60l AdBlue * Front axle: VOK-07, cranked * Front suspension: Parabolic 7.5 t * Rear suspension: Air, 13 t * Brake system: MAN BrakeMatic (electronic braking system) * Rear axle: Hypoid HY-1350 with axle ratio i = 2.71 and differential lock * Digital tachograph: CONTI brand * Regulated rocker lever brake (EVBec) Safety and Comfort Equipment * Emergency Brake Assist 2 (EBA2): switchable * Anti-lock Braking System (ABS): yes * Traction Control System (ASR): yes * Electronic Stability Program (ESP): yes * Disc brakes: front and rear axle * Cruise control: adaptive (ACC) * Lane Guard System IV (LGS IV): yes * Emergency Stop Signal (ESS): yes * Central locking: with remote control Other Features * Spray suppression: yes * Storage table: on refrigerator or storage box * Rear-view and wide-angle mirrors: heated and electrically adjustable * Curb mirror: right, heated and electrically adjustable * Carpet: on engine tunnel * Dangerous goods equipment according to ADR Type AT * Fifth wheel: JOST JSK 37 C, build height 185 mm, with integrated lubrication * Tire size FA: 315/70R22.5 * Tire size RA: 315/70R22.5 * Fuel tank: 1160 liters * AdBlue tank: 60 liters * Technical GVW: 20,500 kg * Curb weight: 7,886 kg * Permissible trailer load: 26,470 kg * Overall length: 6,000 mm * Wheelbase: 3,600 mm * SP due: 07.2026 Vehicle number: 11880 Errors and prior sale excepted. Advertising and various lettering have been digitally removed. We are happy to assist you with all formalities related to vehicle purchase. Simply let us know your wishes and requests – we’ll take care of them. Among other things, we can offer the following services at additional cost: – Trade-in of your old vehicle – TÜV/SP inspection – Complete export handling – Brokerage

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool recording A4, ISO 40 Trajectories X-axis, autom./hand 1000/1020 mm Y-axis, autom./hand 350/370 mm Z axis, autom./hand 430/450 mm Speed range, 2 levels 32 – 1400 U/min Pinole in the vertical milling head yes Milling head, swivel ± 90 ° Pre-push X/Y axis, continuously 10 – 1000 mm/min Pre-push Z-axis, continuously 4 – 400 mm/min Ijdpjd D Tf Hofx Amysib Breaking X/Y axis 5 m/min Rush pass Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Area requirement L x B x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories/Special features: • NC-Point Stretch Control HEIDENHAIN TNC 131 S • Interface RS 232 • Stepless feed • Automatic and/or manual operation possible • Safety devices/-queries for securing hand cranks when the X-Y and Z axis are moved manually as well as manual tool clamping • Vertical and horizontal milling spindle • Pinole in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tool Ruffle drinking str. 151-153 D-44143 Dortmund-Wambel

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Iisdpfx Ajdzp S Nsmyjb Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: new, Year of construction: 2025, neu 2025 080112 prompt, Zwischenverkauf v Türkei 86376 € 1438.29 € 1 76100 € 175 to 3050 mm Y1 / Y2 / X und R-Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 100 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW Iijdowiranjpfx Amyjb 4250 mm 1700 mm 2850 mm 10900 kg 4axes (Y1, Y2,X and R) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 10WEEKS): Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: used, mileage: 10,82,630 km, power: 324 kW (440.52 HP), first registration: 04/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), Tel.: call (Contact · Telephone · Mobile · WhatsApp) Special Equipment: 2 auxiliary drives NAS/10 without flange on top and with flange below, car phone antenna, audio system: MAN Media Truck Advanced 12V radio with navigation system pre-installation, exterior mirrors and wide-angle mirrors electrically adjustable and heated, mechanical battery disconnect switch, curb mirror right side electrically adjustable and heated, CB radio roof antenna, aluminum air tank, air horns on cab roof (2), ETA circuit breaker, cab with air suspension, comfort driver's seat, air-suspended and heated, with lumbar support and shoulder adjustment, central locking with remote control, flame start system, 12-speed gearbox - Type: ZF 12 AS, Tipmatic, automatic climate control, combination fuel tank: aluminum - 450 liter diesel short + 60 liter urea solution (AdBlue), multi-function steering wheel, aluminum rims 9.00x22.5 (ALCOA Dura-Bright EVO on first rear axle), aluminum rims 9.00x22.5 (ALCOA Dura-Bright EVO on first front axle), air deflector to prevent dust turbulence, 2-cylinder 720 cc air compressor, heated air dryer, supplementary air heater Eberspächer D4S, spare wheel aluminum rim 9.00x22.5 ALCOA Dura-Bright EVO, retarder, comfort-quality seat upholstery, external sun visor, sun blind side window, driver's door, sound system, cab sockets 12V and 24V, door extension for cab, additional main-/fog lamps with cornering light Additional Equipment: Axle configuration: 4x2, manoeuvre/front mirror, trailer socket 24V / 7-pin, trailer socket ABS, anti-slip regulation (ASR), battery 175 Ah, on-board computer MAN-Tronic, rear axle differential lock, MAN Brakematic electronic brake system, EURO 6 engine, cab: LX, suspension: leaf/air, electric windows, tinted windshield, generator 28 V 80 A, mechanical tilting roof, body/chassis: tractor unit, rocker lever - EVB brake, heated fuel filter, raised air intake, 12.4 L - 324 kW diesel engine, wheelbase 3600 mm, lateral spare wheel carrier, fifth wheel coupling: Jost JSK 37 C, disc brake front axle, tinted rear side windows, sunblind for windshield, spray suppression, stabilizer on a rear axle, stabilizer front axle, 3-piece steel bumper, drum brake rear axle, tinted door windows, viscous fan, cranked front axle VOK-08, central locking, permissible gross weight 18.00 t Iiedpfxem Eygfj Amyeb * VIN: WMA08SZZ1FW207950 * First registration: 28.04.2015 * with silo compressor * Vehicle had a maintenance contract with MAN up to the current mileage * Net price * All information without guarantee

Condition: new, axle configuration: 2 axles, Equipment: ABS, Humbaur HBT 106224 BS Basic, tapered version Iiedpoyfvg Aofx Amyeb Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm External dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Gross vehicle weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tyres: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3000 kg per lashing point; rings recessed in the platform floor 7 pairs of lashing rings, 1000 kg per lashing point; rings integrated in the external frame Standard equipment: Axles: Axles from renowned manufacturers Suspension: Low-maintenance parabolic suspension with load compensation Tyres: Manufacturer’s tyres of choice on steel rims Braking system: ABS braking system per ECE directive, with ALB function ABS plug connection ISO 7638 Spindle parking brake 2 interchangeable coupling heads (red/yellow) ISO 1728 Towing installation: Drawbar with DIN screw towing eye Ø 40 mm, galvanised, infinitely adjustable via crank Electrics: 24V lighting system with multifunction rear lights and LED side marker lights 15-pin connector for lighting Frame: Heavy-duty, welded and hot-dip galvanised frame Tapered rear end, 12° incline Floor: 40 mm softwood planks Side panels: Anodised aluminium side panels, laterally foldable and removable Corner stanchions, galvanised, insertable front and rear Ramps: 2 foldable steel ramps, one-piece, galvanised, laterally adjustable Ramp lifters: 1 gas strut per ramp Ramp lock at rear stanchion Ramp coating: galvanised grating Supports: Reinforced 12 t gearbox support winch with load and fast gear 2 telescopic folding supports at left and right rear of vehicle Features: Steel mudguards with antispray mats Side underrun protection up to the 1st axle, foldable 2 wheel chocks with holder Contour marking at side and rear Space for two-line licence plate on the left ramp A leasing or financing offer is available on request. Mr. Seidel (Tel.) will be happy to assist you. Further information is available on our homepage. ... Subject to errors, changes, and prior sale!!! = Additional information = GVW: 11,900 kg External dimensions: 0 x 2550 x 3260 Please contact Tobias Ebert for further information.

Condition: used, mileage: 3,47,000 km, first registration: 08/2020, overall weight: 18,000 kg, axle configuration: 2 axles, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, parking heater, Air conditioning, Classic Space cabin, fog lights, roof hatch, multifunction steering wheel, cruise control, underrun protection available, front axle air suspension, side exhaust system, main tank on the left, air-suspended driver’s seat, foldable lower bunk, radio, roof spoilers on cab, EU tachograph, manual air conditioning, exterior sun visor, electric windows driver and passenger, rear axle air suspension, navigation system, seat heating front left, seat ventilation front left, external mirror camera, EURO 6 emission standard, axle configuration: 4x2, front axle load 8.0 t, Actros 5, Actros S / M cab, heated front/rear-view mirror, trailer electrical and brake connection high, trailer socket 24V / 15-pin, cab entry left, exhaust outlet right side, electronic brake system (EPB) with ABS+ASR, rear axle differential lock, compressed air connection in cab, steel air tanks, compressed air unit with condensate monitoring, medium compressed air unit, automatic driving light activation (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5), driver assistance system: Predictive Powertrain Control (satellite-supported cruise control with gearbox program), driver assistance system: Lane Keeping Assist, driver assistance system: Stability Control Assist, cab: fixed access, cab: hydraulic tilting, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, cab floor with 170 mm engine tunnel, cab width 2.30 m, cab mounting height 600 mm, cab variant: M, external left storage flap, storage compartments with lid behind driver and co-driver seat, air intake behind cab, cab: steel suspension, standard, vehicle outline lights LED, suspension: Air/Air (full air), electric windows, tinted windscreen, vehicle without rear wall window, generator 100 A, speed limiter, cruise control system, AdBlue tank: 60 liters, rear axle ring gear 440, integral rear, body/chassis: tractor unit, air conditioning, central locking comfort system, fuel tank: 390 liters aluminum, left, unregulated power steering pump, multifunction steering wheel, steering oil cooling, 2-stage air compressor, heated air dryer, engine 10.7 liters – 315 kW R6 diesel (OM 470) – engine variant OM 470, application: local distribution, wheelbase undefined, ramp mirror, residual heat utilization, Mercedes-Benz PowerShift transmission, disc brakes front and rear axles, remote key (2), side marker lights LED flashing, cab seats: functional co-driver seat, front splash guard, 12V socket in passenger footwell, tachograph / EU tachograph, automatic daytime running lights, Truck Data Center 7 (fleet management system), front underrun protection, prepared for toll recording, preparation for Truck Data Center (fleet management system), cranked front axle, regulated water pump, central locking with remote control, gross weight 18.00 t, high engine tunnel storage, safety equipment package, driver airbag, driver assistance system: adaptive cruise control, exterior mirror camera MirrorCam, battery 220 Ah, multimedia cockpit. Iiedpfxsyf Szio Amyeb

Condition: used, mileage: 4,11,000 km, first registration: 05/2019, overall weight: 18,000 kg, axle configuration: 2 axles, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, parking heater, Air conditioning, Classic Space cab, tinted windows, multifunction steering wheel, cruise control, underrun protection not present, front axle with air suspension, raised exhaust system (behind cab), main fuel tank left - additional tank left, air-suspended driver’s seat, radio, reversing camera, manual air conditioning, exterior sun visor, electric windows for driver and passenger, rear axle air suspension, axle configuration: 4x2 - front axle load 8.0 t, trailer socket 24V / 15-pin, Antos - exhaust to the right outside, electrically adjustable and heated exterior mirrors, electronic brake system (EPB) with ABS + ASR, rear axle differential lock, steel air reservoir, medium compressed air unit, driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keeping Assist, driver assistance system: Stability Control Assist, cab: mounting height 600 mm - cab width 2.30 m, cab: hydraulic tilting device, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with 170 mm engine tunnel, cab variant: ClassicSpace, suspension: air/air (full air suspension), electric windows, tinted windscreen, alternator 100 A, speed control system (cruise control), 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 L, manual roof hatch (steel), rear axle crown wheel 440, integral rear, comfort locking system, three-piece mudguard, fuel tank: 390 L aluminum, unregulated power steering pump, engine brake, engine compartment encapsulation, ramp mirror, spare wheel, residual heat utilization, fifth wheel coupling: manually lubricated, fifth wheel coupling: standard, Mercedes-Benz PowerShift transmission, disc brakes front and rear axles, passenger functional seat, front splash guard, external left storage compartment, 24V socket in cab, tachograph / EC control unit, aerodynamically shaped underbody paneling, front underrun protection, toll recording preparation, cranked front axle, controlled water pump, central locking with remote control, permissible total weight 18.00 t, emission standard EURO 6, driver’s side airbag, audio system: CD radio (Bluetooth), battery 220 Ah, compressed air connection in the cab, driver assistance system: distance control, driver assistance system: Attention Assist (fatigue detection sensor), cab: M ClassicSpace, info display 12.7 cm with video function, air conditioning, fuel tank: low profile, fuel tank: narrow profile, air intake behind cab, two-stage air compressor, engine 10.7 L - 290 kW inline 6 diesel (OM 470), fog lights with LED, daytime running lights and cornering lights, wheelbase 3700 mm, acoustic reversing alarm (external warning signal), fifth wheel coupling: mounting height 150 mm, lower sleeper berth, circuit breaker, seat cover/upholstery: driver’s seat velour, seats in cab: passenger seat with armrest, seats in cab: comfort swing driver's seat, seats in cab: fold-down backrest on driver’s seat, exterior sun visor, steel rims 9.00x22.5 (rear axle), additional 24V socket in passenger footwell, reinforced steel front bumper corners, pre-installation for reversing camera, seat belt warning system, auxiliary heater (water, ABS, differential lock, auxiliary heater, cruise control, spoiler package, disc brake, on-board computer). Ijdeyf Szpepfx Amyeib

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 102300 € 1933.47 € 80 to 2550 mm 4 320 mm 2840 mm 500 mm servomotorischer Riemenan 105 mm/s 10 mm/s 105 mm/s 650 mm 250 mm 3700 mm 2200 mm 2550 mm 6400 kg Electromotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17“ - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked Iodpfx Aeynndfsmyoib 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: -no reduction of working width by side side columns, distance between columns is bigger as bending width - up to 30 % higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal - marginally frame deflection - now crowning necessary by spreading the force along the bending length - high repetition and bending accuracy along the bending lengt -low energy consumption -no hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 74800 € 1413.72 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive Iedpfxsynm A He Amyjib 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 72300 € 1366.47 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components Iiedpoynm Aysfx Amysb optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 127400 € 2407.86 € 220 to 4050 mm Y1 / Y2 / X und R Achse 265 mm 3600 mm 410 mm 530 mm hydraulisch 200 mm/s 12 mm/s 180 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 5250 mm 1770 mm 2900 mm 15000 kg Iijdpfeynm Amsx Amysb 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 252800 € 600 to 4050 mm Y1 / Y2 / X und R Achse 365 mm 3100 mm 410 mm 700 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 280 l 5750 mm 2500 mm 4000 mm 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows Isdpoynmxnefx Amyeib - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control Delem DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: as good as new (ex-display), functionality: fully functional, mileage: 4,500 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,100 mm, overall weight: 3,500 kg, empty load weight: 2,440 kg, first registration: 07/2022, loading space length: 4,800 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: steel, number of seats: 3, Year of construction: 2022, fuel: diesel, Equipment: ABS, air conditioning, cable winch, cruise control, hydraulics, onboard computer, trailer coupling, Sliding platform COULISSALU 3.5 Hydraulic Aluminium platform 4990x2060 remote control for platform and winch Slide for winch Hydraulic Winch BULL 3500 -steel CABLE Towhook High flyer Platform in high-quality extruded aluminum section 4990x2060 Iijdjy Du Rrspfx Amysb Profiled railings with 12 lashing points Electric tray control box with integrated fuses Manual winch and ball translation on platform 2 galvanized wheel chocks Tow hitch and towing ball with cranked ball joint and 12V 7-pin socket GRAND ARCEAU - Flyer-type rollbar BULL 3500 hydraulic winch Radio control of platform and winch

Condition: used, mileage: 2,33,823 km, power: 240 kW (326.31 HP), first registration: 12/2014, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Mercedes-Benz 2533 Antos MULTILIFT Hook Lift 6x2 Suspension: Leaf/Air Wheelbase: 4.30 m MULTILIFT Type: XR26S56 5.50 m to the center of the rollers Special Features: - Front axle load 8.0 t - Audio system: CD radio (Bluetooth) - Exhaust exit downwards right - 220 Ah battery - Compressed air connection in cab - Electrical pre-wiring in cab 24V / 100 A - Suspension: front springs 8.0 t, 2-leaf - Fleetboard vehicle computer - Bus stop brake - Communication interface - 3-piece mudguards - Steerable trailing axle - Programmable special module - Frame lowering without residual pressure control on air bellows - Acoustic reverse warning (external warning signal) - Cab seats: driver comfort air suspension seat - Exterior sun visor - 24V / 25A socket in passenger footwell - Gearbox oil cooler Additional Equipment: - Emission standard EURO 6 - Axle configuration: 6x2 - Trailer brake, 2-line - Trailer socket 24V / 15-pin - Antos - Exterior mirrors electrically adjustable & heated - Rear axle differential lock - Steel air reservoir - Medium compressed air unit - Cab width: 2.30 m - Cab: hydraulic tilting - Cab: M ClassicSpace - Cab: steel-sprung, standard - Cab floor with 320 mm engine tunnel - Suspension: leaf/air - Electric windows - Tinted windscreen - 100A alternator - 12-speed gearbox - Type: G 211-12 - Urea tank (AdBlue): 60 l - Manual lifting roof (steel) - Rear axle crown wheel 440 - 10.4 cm info display - Central locking system - Fuel tank: 290 l aluminium - Non-regulated power steering pump - Lift and steered axle - Air intake at the front - 2-stage air compressor - Engine 10.7 L - 240 kW R6 diesel (OM 470) - Engine brake - Engine compartment encapsulation - Single tires on trailing axle - Ramp mirror - Residual heat utilization - Disc brakes on front & rear axles - Seat cover/upholstery: fabric - Cab seats: multifunctional passenger seat - Front splash guard - Front axle stabilizer - Additional stabilizer - 24V socket in cab - Aerodynamically shaped underbody panel - Front underrun protection - Cranked front axle - Controlled water pump - Permissible total weight 25.00 t - Extendable underrun protection (+1.00 m) Iiedpfx Aew Dwikemyjb We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 5,99,739 km, power: 265 kW (360.30 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space length: 8,970 mm, loading space width: 2,480 mm, loading space height: 230 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, Mercedes-Benz 2636 Antos Refrigerated Box Truck with BÄR Tail Lift 6x2 !!! 3 identical vehicles in stock !!! Suspension: Air-Air Wheelbase: 5.60 m + BÄR tail lift + Carrier refrigeration unit Special equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Exhaust down to the right, Right-hand exterior mirror with maneuvering position, Compressed air connection in cab, High compressed air unit, Pneumatic horn, Driver assistance system: Brake Assist (Active Brake Assist), Vehicle without trailer coupling, Alternator 150 A, 2-cylinder air compressor, Steerable and liftable trailing axle, Tail lift switch, Fleet management system interface, Circuit breaker, Seats in cab: Driver’s comfort air suspension seat, External sun visor, Side window roller sun blind, driver’s door, Voltage converter 24V / 12V 10 A, 12V socket in co-driver’s footwell, Additional 24V socket in co-driver’s footwell, Automatic daytime running lights Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Trailer brake 2-line, connections left, 24V / 15-pin trailer socket, Antos, Electrically adjustable and heated exterior mirrors, Battery 170 Ah, Rear axle differential lock, Steel air tanks, Driver assistance system: Lane Keeping Assist, Cab width: 2.30 m, Cab: hydraulic tilting system, Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with 320 mm engine tunnel, Suspension: air / air (full air), Electric windows, Tinted windshield, 12-speed gearbox – Type: G 211-12, Urea tank (AdBlue): 60 ltr., Manual pop-up roof (steel), Rear axle, crown wheel 440, Info display 10.4 cm, Central locking system, Fuel tank: 290 ltr. aluminum, Unregulated power steering pump, Front air intake, Engine 10.7 ltr. – 265 kW R6 diesel (OM 470), Engine brake, Engine compartment encapsulation, Trailing axle single tires, Ramp mirror, Residual heat utilization, Disc brakes front and rear axles, Seat cover/upholstery: fabric, Cab seats: co-driver function seat, Front mudguards, front axle stabilizer, Additional stabilizer, Rear/trailing axle, 24V cab socket, Tachograph / EC control device, Aerodynamically shaped underbody cladding, Front underrun protection, Cranked front axle, Regulated water pump Ijdpfxox Axpao Amyeib We are also happy to assist you in financing/leasing through our partners. All information without guarantee. Subject to error and prior sale.

Condition: used, Technical details: Isdpfeyq Rpiox Amyjib bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D. *

Condition: used, mileage: 6,56,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: Iodpfxsvcuddo Amyoib EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: used, mileage: 6,56,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle Iisdpfx Aevcudkomyeb

Condition: used, maximum load weight: 31,640 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle SCHWARZMÜLLER Full-ALU Walking Floor Semi-Trailer 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Fifth-wheel height: 1,150 to 1,200 mm Axle distance: 1,310 mm Unladen weight: 7,380 kg ALU chassis SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version WABCO trailer EBS with roll stability support (RSS) 1st axle lift axle Aluminum air tanks 6x 385/65 R 22.5 tires JOST full-load crank landing gear ASPÖCK full-LED lighting 4 x LED work lights Toolbox rear left Full-length seam-welded interior wall profiles CARGOFLOOR moving floor with 21 slats, material thickness 8 mm ribbed Remote control operation Rear end plate made of stainless steel 3 bows, reinforced for waste transport Reinforced roof tarpaulin PANAMA 900 g/sqm Swinging rear cross beam With grain hatch in left door leaf 15 pairs of recessed lashing rings in the end profile Iiodpfx Ameyrlcgjyeb RENTING is the new BUYING – available from us immediately, also in FULL-SERVICE RENTAL.

Condition: new, pressure 17,0 kN Isdpfx Amsfv Avvjyjib stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, pressure 26,0 kN stroke 60 mm throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Iodpfx Asfv Avromyoib Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column