Used Crank for sale (570)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Triptis
6,657 km
Flatbed open
FlieglPlateau
Call
Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 17,5, tire condition: 100 %, Additional information
Chassis
Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins
Recessed rail for loading ramps on the rear extension over the entire width, outer edge beveled to prevent damage.
Reinforced frame for vehicle loading
Outer frame with load-lock profile approx. every 400 mm for securing lashing straps
10 pairs of lashing eyes recessed on the top/outside of the outer frame, each 10 tons, starting after the neck area
24-ton, 2-speed support jacks, single-sided operation, with a flat mounting plate
2 wheel chocks with holder
Aluminum side impact protection
Galvanized steel underride protection
Sheet metal as a splash guard riveted to the bottom, in the neck area above the center of the bogie axle and above the axle assembly
Semi-elliptical fenders
with anti-spray flaps according to EC
Container locking system, 4 pairs of locking recesses recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters (additional cross supports required at the front and rear of the container; the container must rest evenly across its width in conjunction with the locks; cross supports are not included)
Attention! Damage to the platform floor is possible due to the cross supports!
Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, including extendable underride protection with lighting (then the rear ladder is omitted)
Covered with platform in the wheel arch area, with steel diamond plate in the center.
Attention! Ramp loading at the rear is only possible with the rear extension in the retracted position!
Storage space for loading ramps integrated in the rear extension, only usable when the rear extension is extended 1000 mm – then there is an overhang
For transporting the ramps with the rear extension retracted, there is storage space for the ramps on the right side of the frame in front of the axles
1 pair of ramps, 3000 mm long, 300 mm wide, load capacity per pair 6000 kg (recessed rail for ramps on the rear extension)
Rear slope to approx. 500 mm
Electric winch, 24 volts, pulling force approx. 8165 kg, mounted in the center at the front, operated with a wireless remote control, cable length 35 m x approx. 10 mm, with a cable guide and removable guide rollers
Axles + Suspension
Ijdpolf Dtmofx Amyoii
Drum brake axles
Axle/suspension laser-aligned to reduce tire wear and fuel consumption
Air suspension
1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance functions up to an axle load exceedance of 30% and a speed of max. 25 km/h)
with central lift arm
Axle lift below the recommended ride height, therefore no guarantee for tire damage
Braking system
2-line pneumatic braking system
Color-coded lines for easy service.
Spring parking brake
2 non-interchangeable coupling heads at the front, without connecting line
EBS, Electronic Braking System with EBS socket at the front, without connecting cable
Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS!
with raise and lower valve
Vehicle - driving stability system
Wheels and tires
235/75 17.5, manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrical system
24 volts, multi-chamber lights, yellow LED lighting on the side
2 white position lights at the front in LED
2 white/red marker lights at the rear
2 additional LED work lights at the rear, switched via the revers
Success:
Your message has been sent.
Listing
Allendorf (Eder)
6,884 km
Long belt sander
KBM Maschinenbau GmbHM2S92-150
Call
Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass.
Not for aluminum or titanium!
Scope of delivery includes:
- Machine stand with connecting elements
- Belt drive
- Pneumatic belt tensioning and manual belt guide
- Sanding unit with contact roller, manually movable from belt 1 to belt 2
- Electric table lift
- Flat machine table
- Workpiece stop on the machine table
- Original equipment sanding belts
- CE-certified version
- Operating instructions + manufacturer's declaration according to Appendix 2
The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine.
Isdpfxev S Sr Re Amysii
Machine color:
RAL 9001 cream white and RAL 5003 sapphire blue
Control cabinets and small housing in "light gray"
The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm.
Additional accessories:
3-axis table with integrated handling device for rotating and swiveling the workpieces.
The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.
Success:
Your message has been sent.
Listing
Wiefelstede
6,930 km
Electric clutch
FASTIErsatzteil
Call
Condition: good (used), electric clutch, electromagnetic clutch for guillotine shear, sheet metal shear, sheet metal guillotine shear, crank guillotine shear, eccentric press
-for: Crank-operated guillotine shears
-Equipment: Coupling, transformer, control unit
-Manufacturer: LABOD electronic
-Type: GN 6 DZ.4Q.80
-Total net weight: 160 kg
Isdpfx Aob A I Uiemysii

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Bühl
6,917 km
Vise
Call
Condition: used, thickness of jaw 250 mm
height of jaw 80 mm
clamping width 340 mm
Iiodotqqphepfx Amyji
= hydr. machine vice
(pos.2)
- with hand crank and 3 clamping shoes -
Success:
Your message has been sent.
Listing
St.Lorenz
6,533 km
Skip truck
MANTGA 18.320 4X2 Absetzkipper Euro 4 Bj 2007
Call
Condition: used, mileage: 5,67,086 km, power: 235 kW (319.51 HP), first registration: 07/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, emission class: euro4, Equipment: ABS, Tel.: Call
(Contact · Phone · Mobile · WhatsApp)
Isdpfsta I Sisx Amyjii
Special Equipment:
Tow hitch: Rockinger 400 G 150 A, Car phone antenna, Mechanical battery disconnect switch, Operating hour counter, Comfortshift transmission, Rear axle differential lock, Air horns on cab roof (2), Cab: Electro-hydraulic tilting mechanism, Cab: with 2 tinted rear windows, Flame start system, Tinted windshield, Tipper lever – brake system regulated by EVBec, Tinted side windows, Seat upholstery: comfort quality, Exterior sun visor, 24V dual-plug cab socket, 3-piece steel bumper, Tinted door glasses, Front underrun protection, Viscous fan
Additional Equipment:
Axle configuration: 4x2, Front axle load 8.0 t, Start-up/front mirror, 24V / 7-pin trailer socket, ABS trailer socket, Anti-Slip Regulation (ASR), Electrically adjustable and heated exterior mirrors, Wide-angle and electrically adjustable/heated exterior mirror (right), 175 Ah battery, Battery box, MAN-Tronic on-board computer, Right curb mirror, MAN-Brakematic electronic brake system, EURO 4 engine, Cab: M (medium length), Comfort driver’s seat, Tachograph, Suspension: leaf/air, Electric window regulators, 28 V 80 A alternator, Speed limiter system 80/85 km/h, 16-speed gearbox – type: ZF 16 S, Rear axle HY-1350, Interior pollen filter, Body/structure: chassis, Heated fuel filter, Adjustable steering column/wheel, Headlight range adjustment, 2-cylinder air compressor, Engine 10.5 L – 235 kW diesel, Radio pre-wiring 24V, Rear axle disc brake, Front axle disc brake, Side underrun protection, Front axle stabilizer, Tow hitch cross member, Rear underrun protection, Cranked front axle VOK-08, Electronic immobilizer, Central locking, Permissible gross weight 18.00 t
* VIN: WMAH06ZZ67M484009
* First registration: 19.07.2007
* Price net
* All information without guarantee
Discover more used machines
Success:
Your message has been sent.
Listing
Stuhr
6,888 km
Construction trailer
VezekoMOBI4211 Bauwagen 8-Personen Chemie-WC L
Call
Condition: new, overall weight: 1,300 kg, empty load weight: 1,140 kg, maximum load weight: 160 kg, loading space length: 4,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165R13C, Car trailer as a construction trailer for 8 people with toilet and storage room.
The insulated recreation trailer is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. A heater provides support in very cold weather.
Ijdperx Sn Tjfx Amyoii
The use of a crew trailer is possible on almost any construction site. As a normal car trailer, it can be driven to the construction site by a simple car. These vehicles are also operated as Burö trailers.
Our mobile construction trailers have the following as standard
an entrance door with personal lock lockable, toilet room with chemical toilet and sink, storage room with shelf, stairs and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar.
Further technical details can be found below.
Accessories for construction trailers include a toilet with drainage via a sewer, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.
Success:
Your message has been sent.
Listing
Velen
7,005 km
Drilling and Milling M/C
UWMBF20 Vario
Call
Condition: new, bore capacity in steel (diameter) 16 mm
throat 185 mm
bore stroke 50 mm
20 mm
spindle taper MK 2
spindle diameter mm
spindle turning speed range 100-1500 / 200-3000 U/min
175 mm
280 mm
table surface area 500 x 180 mm
connected load frequency 230 V
total power requirement 0,85 kW
weight of the machine ca. 0,12 t
Iodpfjurznwox Amyoii
dimensions of the machine ca. 0,86 x 0,6 x 0,9 m
Drilling and milling machine
- Cross Support
- Cabinet
- Swivel spindle head left / right 90 °
- Feed via hand crank
Success:
Your message has been sent.
Listing
Hessisch Lichtenau
6,811 km
Conveyor belt, belt conveyor, belt conveyor, belt conveyor, timing belt conveyor, small parts convey
MFP Fördertechnik2800 x 360
Call
Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik
Machine No: 20083 Year of manufacture: 2021
Usable length: 2800 mm
Belt width: 360 mm
Usable width: 300 mm
Belt length: approx. 5800 mm
Frame profile construction height: 70 mm
Deflection roller diameter: 20 mm
Belt speed: 10 m/min to 48 m/min
Conveyor belt height: approx. 1150 mm
Motor power: 140 Watt
Power supply: 230 Volt, 50 Hz
- Stepless belt speed via potentiometer on ROFRE frequency converter, type 897
- Right-left run
- Belt drive via INTERROLL tube motor
- Stable steel sheet construction with closed steel plate under the conveyor belt
- 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm
Iiedpfowqg Enjx Amyoi
- Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm
- 1 piece fixed support foot without height adjustment as transport support
- Fully mobile on fixed castors
Overall dimensions L x W x H: 2880 x 500 x 1150 mm
Weight: 200 kg
good condition
Success:
Your message has been sent.
Listing
Hövelhof
6,884 km
Vise
Call
Condition: good (used), functionality: fully functional, overall weight: 135 kg, total height: 250 mm, total length: 900 mm, total width: 400 mm, -KOM 694-
This hydraulic power vice features a 360-degree rotating base and a vertical crank.
Iedpjwf Nc Sefx Amyjii
Technical specifications:
Jaw width: approx. 200 mm
Jaw height: approx. 65 mm
Opening stroke: approx. 355 mm
Dimensions: approx. (900 mm x 400 mm x 250 mm)
Weight: approx. 135 kg
Success:
Your message has been sent.
Listing
Dautphetal - Wolfgruben
6,891 km
Volume tractor unit
MERCEDES-BENZ1845 LSnRL Low Liner - Standklima -
Call
Condition: used, mileage: 6,05,000 km, power: 330 kW (448.67 HP), first registration: 07/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 1845 LSnRL Actros BIG SPACE - air conditioning - retarder - good condition
* Chassis number : WDB96340610079482 - from 1st hand - German vehicle -
* Diesel - displacement : 12.809 ccm³ - 330 KW / 449 PS - Euro 6 - Green sticker -
* Tire sizes : Front axle : 355 / 50 R 22,5 Rear axle : 295 / 60 R 22,5
* Electric air conditioning & stationary air conditioning -
* PICK-UP PRICE - TAKE IT AS IT IS - WITHOUT TÜV - WITHOUT LICENSE PLATE -
* Vehicle immediately available and ready for collection
* For viewing please make an appointment -
* Contact person : Mr. Andreas Vogel
* The information provided on the Internet is a non-binding description.
* They do not represent guaranteed characteristics.
* The seller is not liable for typing or data transmission errors.
* Subject to alterations, errors and prior sale.
Special equipment:
Axle load front axle 8.0 t, Airbag driver's side, Ambient lighting LED, Work lights, Audio system: CD radio (Bluetooth), Bi-xenon headlights, CB radio, Air horn, Electrical pre-installation in cab 24V / 100 A, Driver assistance system: Attention-Assist (drowsiness detection sensor), Driver assistance system: Brake Assist (Active Brake Assist 3), Driving assistance system: Lane Keeping Assist, Driving assistance system: Roll Control Assist, Driver's cab: Style-Line interior, Suspension: Front springs 8.0 t, Air suspension, Holder for notebook, Info display 12.7 cm with video function, Automatic air conditioning, Comfort couch top, wide, Fuel tank: 630 ltr. aluminum, cool box / refrigerator, integrated air intake, roof air deflector (latching, without plinth panel), tire pressure monitoring system, spare wheel, side spare wheel lift, retarder, tail lift switch, automatic circuit breaker, seats in cab: SoloStar Concept, exterior sun visor, auxiliary air conditioning, additional 24 V socket in passenger footwell, preparation for Fleetboard, preparation for reversing camera, additional thermal insulation
Iijdpfx Amevul H Hsysi
Further equipment:
EURO 6 emissions standard, axle configuration: 4x2, Actros 4, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel air reservoir, medium air unit, cab: L BigSpace, cab: steel-sprung, comfort, suspension: air / air, electric windows, tinted windscreen, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Rear axle disk wheel 440, Body/bodywork: Chassis, comfort locking system, communication interface, radiator blind, power steering pump controlled, lift device trailing axle, 2-stage air compressor, engine 12.8 ltr. - 330 kW R6 diesel (OM 471), engine brake, engine compartment encapsulation, trailing axle with single tyres, ramp mirror, residual heat utilization, front and rear axle disc brakes, seats in cab: passenger function seat, seats in cab: Driver's seat backrest can be folded down, Voltage converter 24V / 12V 10 A, Front splash guard, Front axle stabilizer, Additional stabilizer, Rear axle / trailing axle, External left-hand storage flap, 24V cab socket, Tachograph / EC tachograph, Door extension for cab, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle, Regulated water pump, Perm. Gross vehicle weight 18.00 t, Auxiliary heating (water)
Success:
Your message has been sent.
Listing
Öhringen
6,823 km
Long folder, bender
BIEGEMASTERBENDTRON 4.1,50
Call
Condition: new, Year of construction: 2026, The bending machine taken to the next level. The Biegemaster BendTron is the first generation to be driven completely by electric motors. The BendTron enables you to bend all common profiles with a bending length ranging from 4 to 15 metres with material thicknesses of up to 1.5mm (steel) with the accustomed reliability and precision.
BIEGEMASTER long folding machine – BENDTRON 4.1,50
Working length : 4010 mm
Bending capacity
steel 400 N/mm² : 1,50 mm
stainless steel 600 N/mm² : 1,25 mm
alu 190 N/mm² : 2,00 mm
Stands + Tension Arms : 4 pcs.
Incl. BMS-Multi-Touch Control and automatic taper back-gauge
Incl. Cranked bending beam for making small Z-, U- and hat-profiles
Incl. Material support, perserving polyethylen surface
Incl. electric cutter
Directly from the manufacturer. Made in Germany.
Isdpfsgp S R Eox Amyoii
Success:
Your message has been sent.
Listing
Pottendorf
6,304 km
Pad printing machine
TAMPOPRINTConcentra 60-6
Call
Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CON.07.10.0154, compressed air connection: 8 bar, input voltage: 230 V, total width: 1,329 mm, total length: 1,150 mm, total height: 1,725 mm, overall weight: 812 kg, pneumatic connection: 8 bar, Equipment: documentation/manual, 6-color pad printing machine from the manufacturer TAMPOPRINT, model Concentra 60-6
Isdpfx Aezwv Rwomysii
Max. printing area diameter (circle diameter) 55mm, total of 6 colors
Year of manufacture 2010, weight 812 kg
Air consumption 48 standard liters per cycle
Good overall condition, machine fully functional, minimal air loss on one of the main valves.
Visual condition as shown in the current photos.
Scope of supply:
TAMPOPRINT Concentra 60-6 as a stand model
+ Foot pedal
+ Hand crank for height adjustment of the tilting table
+ 6 used ink pots 60mm
+ 6 used printing rings (for the ink pots)
+ 2 used mounting tables (for ink pot and cliché mounting)
+ 2 used gripper tongs (for ink pot and cliché mounting)
+ 2 used pad coupling devices plus mounting screws (4 pad coupling devices still need to be purchased)
+ 1 heavy-duty hook for transporting the machine
+ Documentation (operating manual, parts list, wiring diagram)
Option 1
6 additional used ink pots 60mm, EUR 420,- excl. VAT.
Option 2
4 pad coupling devices (new) from the manufacturer, EUR 1,098,-
Packaging: The machine can only be packaged by wrapping it completely in cardboard and bubble wrap; it will not be placed on a pallet.
The pad printing machine can be inspected and tested in Pottendorf by appointment.
Delivery: Ex works Pottendorf (Austria).
For collection, only trucks with a tail lift are permitted; please note the machine's weight.
The transport of this machine is at the buyer's expense and risk.
Packaging costs EUR 120,-
Selling price EUR 18,200,- excl. VAT.
New price approx. EUR 70,000,-
Success:
Your message has been sent.
Listing
Hessisch Lichtenau
6,811 km
Pillar drill, column drill
GILLARDONGSB 32 V
Call
Condition: used, Column Drill Gillardon Type GSB 32 V
Machine No.: Year of manufacture approx. 1975
Drilling capacity: 32 mm
Taper: MK 4 – long quill
Iiedoyhf Izopfx Amysi
Throat: 350 mm
Quill travel: 170 mm
Table size: 570 x 470 mm
Column diameter: 140 mm
Spindle speed Motor speed step 1, Belt step 1: 50 – 300 rpm, stepless
Spindle speed Motor speed step 2, Belt step 1: 100 – 600 rpm, stepless
Spindle speed Motor speed step 1, Belt step 2: 100 – 500 rpm, stepless
Spindle speed Motor speed step 2, Belt step 2: 150 – 1000 rpm, stepless
Motor power: 1 / 1.5 kW
Power supply: 380 Volt, 50 Hz
- automatic feed approx. 0.1 / 0.16 / 0.25 mm/rev, 3 steps
- spindle speed via 2 motor speeds, 2 V-belt stages and variator gearbox
- adjustable drilling depth stop
- table height adjustment via rack and hand crank
- tiltable drilling table with angle scale
- drill chuck RÖHM Ø 1 to 13 mm
- machine lamp
Required space (L x W x H): 1000 x 750 x 2000 mm
Weight: 470 kg
Good condition
Success:
Your message has been sent.
Listing
St.Lorenz
6,533 km
Refrigerated truck
MANTGL 12.240 Kühlkoffer 4x2 Bj 2006
Call
Condition: used, mileage: 4,77,163 km, power: 176 kW (239.29 HP), first registration: 12/2006, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro4, Equipment: ABS, Tel.: Call
(Contact · Telephone · Mobile · WhatsApp)
Iiedpfevrnryjx Amyji
Special equipment:
Tow coupling Ringfeder 6441, rear crossmember, car phone antenna, audio system: MAN CD radio 24V, electrically adjustable and heated exterior mirrors, wide-angle exterior mirrors electrically adjustable and heated, left, wide-angle exterior mirrors electrically adjustable and heated, right, battery 140 Ah, mechanical battery master switch, kerb mirror left electrically adjustable and heated, kerb mirror right electrically adjustable and heated, rear axle differential lock, entrance lighting driver's/passenger's side, driver's seat comfort, air suspended, electric window regulators, flame start system, tinted windscreen, mechanical lifting roof, rocker - brake EVB, fuel tank: 200 L, reading lights for driver and passenger, raised air intake, dry air filter right below, seat upholstery: comfort quality, exterior sun visor, tinted door windows, central locking
Additional equipment:
Axle configuration: 4x2, on-board computer MAN-Tronic, compressed air connection front, electronic brake system MAN-Brakematic, EURO 4 engine, cab: C (Compact), suspension: leaf/air, generator 28 V 80 A, gearbox type: Eaton 8309, rear axle HY-0925, body/chassis: chassis, heated fuel filter, adjustable steering column (steering wheel), engine 6.9 l - 176 kW Diesel, engine brake, spare wheel carrier behind rear axle, disc brake rear axle, disc brake front axle, rear axle stabilizer, plastic bumper, underride protection rear, underride protection front, viscous fan, front axle VOK-05 cranked, permissible gross vehicle weight 11.99 t
* MAN TGL 12.240 4x2 BL
* Refrigerated box fresh service
* Thermoking unit
* Engine and electrics running
* Tail lift with safety lock
* Euro 4
* Automatic transmission
* VIN: WMAN14ZZX7Y180436
* Year of manufacture: 07.12.2006
Success:
Your message has been sent.
Listing
Gera
6,640 km
Tipper- three-way
SarisK3 356 184 3500 Tandem 3-Seiten Kipper
Call
Condition: new, functionality: fully functional, machine/vehicle number: NEW-25, empty load weight: 886 kg, maximum load weight: 2,614 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,560 mm, loading space width: 1,840 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 356 184 3500 2E Three-sided tipper
NEW VEHICLE
Internal dimensions: 356cm x 184cm
Side wall height: 35cm
Loading platform height: 75cm
Total weight: 3500kg
Payload: 2614kg
Braked tandem axle trailer
Overrun brake and parking brake from AL-KO
Largest possible axle and brake
Low chassis
Fully welded, hot-dip galvanized steel frame
35cm aluminum profile side walls with tensioning latch
Can be folded down and removed on all sides
15mm thick, non-slip and robust screen-printed plywood floor
Additional steel plate on the plywood floor
Automatic jockey wheel with 400kg support load
8 noise-reducing lashing eyes with 800kg pulling force
Reinforced 13" C tires with steel valve
M+S tires
Net/rope hook on the frame
13-pin connector
LED outline lights at the front
Rear lights with reversing light and triangular reflectors
Upper frame mounted on rubber
Large tipping angle of 41 degrees backwards
Lateral tilting by repositioning the safety pins
Electric tipping operation with plug for charging the 12V battery
Electric limitation of the tipping angle to the side
U-rail for attaching the original SARIS loading ramp
OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026
-Equipment for 100km/h (shock absorbers)
-Spare wheel with holder
-Without side walls (price reduction)
-Black Edition (Powder-coated side walls and rims in black)
-Integrated loading ramps 2800kg
-Extended tipping angle to 52 degrees (5-stage cylinder)
-Charger
-Remote control
-Bluetooth remote control
-Emergency hand pump in combination with electric operation
-Safety support for maintenance work on a tilted vehicle
-Folding crank rear supports
-Complete LED lighting
-Theft protection
-Net, fine or coarse mesh
-H-frame
-Leaf grid in various heights, also closed
-Extension side walls 30cm with tensioning latch
-Flat cover with or without rail
-High cover 180cm or 200cm
Iiodoghpa Ujpfx Amysi
Further accessories available upon request!
Plus freight to Gera and vehicle registration document €250 net
Images are for illustrative purposes only and may show optional accessories that incur additional costs.
Have you not yet found the right trailer?
We have 50-100 vehicles permanently and immediately available in stock.
The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs.
Specialist in axle repair, also for caravans.
In addition, we have a large selection of spare parts and accessories, including for trailers from various manufacturers.
You can find a wide selection of rental trailers with us.
Visit us online or come by directly!
Success:
Your message has been sent.
Listing
Gera
6,640 km
Flatbed open
SarisHochlader Mehrzweckanh. PL 306 170 2700
Call
Condition: new, functionality: fully functional, machine/vehicle number: NEW-12, maximum load weight: 2,251 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 306 170 2700 2
NEW VEHICLE
Internal dimensions: 306cm x 170cm
Side wall height: 30cm
Loading platform height: 65cm
Total weight: 2700kg
Payload: 2265kg
Braked tandem axle trailer
Overrun brake and handbrake by KNOTT
2x 1350kg axles with brakes
Low chassis
Fully welded, hot-dip galvanized steel frame
Aluminum profile side walls with tensioning latches
Can be folded down and removed on all sides
15mm thick, non-slip and robust screen-printed plywood floor
Automatic support wheel with 400kg support load
8 noise-reducing lashing points with 800kg tensile force
Reinforced 13" C tires with steel valve
M+S tires
Net/rope hook on the frame
13-pole connector
LED marker lights at the front
Rear lamps with reversing light and triangular reflectors
OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES STARTING IN FEBRUARY 2026
- Equipment for 100km/h (shock absorbers)
- Spare wheel with holder
- Without side walls (price reduction)
- Side wall height increased to 35cm
- Black Edition (Powder-coated side walls and rims in black)
- Integrated loading ramps 2800kg
- Steel plate on the base plate
- Complete LED lighting
- Anti-theft device
- Fine or coarse mesh net
- H-frame
- Leaf guard in various heights, also closed
- Extension side walls 30cm with tensioning latches
- Flat cover with or without bow
- High cover 160cm - 200cm
- Folding crank rear supports
More accessories available upon request!
Plus freight to Gera and vehicle registration document 200€ net
Images are for illustrative purposes and may show optional accessories at an additional cost.
Haven't found the right trailer yet?
We have 50-100 vehicles permanently in stock and ready for immediate pick-up.
The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs.
Specialist in axle repairs, also for caravans.
Large selection of rental trailers.
Hnobqeghpbyeupd Nfoh
Iijdpfx Amsghpchsyei
We also have a large selection of spare parts and accessories for trailers of all manufacturers.
Get advice by phone, visit our website or come by directly.
Success:
Your message has been sent.
Listing
Gera
6,640 km
Tipper- three-way
SarisK1 276 150 2000 Kipper Rückwärtskipper
Call
Condition: new, functionality: fully functional, machine/vehicle number: NEW-10, empty load weight: 535 kg, maximum load weight: 1,465 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2000 2 Rear Tipper
NEW VEHICLE
Internal dimensions: 276cm x 150cm
Side board height: 30cm
Loading platform height: 66cm
Total weight: 2000kg
Payload: 1465kg
Braked tandem axle trailer
Overrun brake and handbrake by KNOTT
2 axles with 1350kg brake
Low chassis
Fully welded, hot-dip galvanized steel frame
Aluminum profile side boards with tensioning closure
Can be folded down and removed on all sides
15mm thick, non-slip and robust screen-printed plywood floor
Additional steel plate on the plywood floor
Automatic jockey wheel with 400kg support load
8 noise-reducing lashing eyes with 800kg tensile force
Reinforced 13" C-rated tires with steel valve
M+S tires
Net/rope hook on the frame
13-pin connector
LED side marker lights at the front
Rear lights with reversing light and triangular reflector
Upper frame mounted on rubber
Large tipping angle of 48 degrees to the rear
Hand pump with adjustable handle
OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026
-Equipment for 100km/h (shock absorbers)
-Spare wheel with holder
-Without side boards (price reduction)
-Side board height increased to 35cm
-Black Edition (Powder-coated side boards and rims in black)
-Ramps
-Electric tipping operation
-Charger
-Remote control
-Bluetooth remote control
-Emergency hand pump in combination with electric operation
-Safety support for maintenance work on a tipped vehicle
-Folding crank rear supports
-Complete LED lighting
-Theft protection
-Net with fine or coarse mesh
-H-frame
-Leaf grid in various heights, also closed
-Extension side boards 30cm with tensioning closure
-Flat sheet with or without frame
-High sheet 160cm or 180cm
Further accessories available on request!
Plus freight to Gera and vehicle registration document 200 € net
Images are for illustrative purposes only and may show optional accessories that incur additional costs.
Haven't found the right trailer yet?
We have 50-100 vehicles permanently in stock and available for immediate pickup.
The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs.
Specialist in axle repair, also for caravans.
Iijdpfxoghpcpj Amyji
In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers.
Visit us online or come directly!
Success:
Your message has been sent.
Listing
Hessisch Lichtenau
6,811 km
Material clamp, material grab, load clamp, carrying clamp, lifting clamp, block tongs, crane grab, l
NORDGREIF7548
Call
Condition: used, Material clamp, material gripper, load clamp
Lifting clamp, hoisting clamp, block grab
Manufacturer: NORDGREIF, Type 7548
Year of manufacture: 1997
Load capacity: 500 kg
Gripping width: 280 to 420 mm
- Width adjustment via trapezoidal thread with hand crank
- Rubber protective coating on the gripping surfaces
- for crane operation
- with CE marking
Isdpodz Spnsfx Amyoii
Weight: 50 kg
good condition
Success:
Your message has been sent.
Listing
Wiefelstede
6,930 km
Clamping table
unbekannt600 x 220 mm T-Nut 12 mm
Call
Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table
-Clamping table: milling machine table
-Table surface: 600 x 220 mm
-Y-axis: 130 mm movable, hand crank with fine adjustment, see photos
-T grooves: groove width 12 mm, groove spacing 45 mm
Iiedjqddi Uepfx Amyei
-Total dimensions: 690/490/H300 mm
-Weight: 72 kg
Success:
Your message has been sent.
Listing
Stuhr
6,888 km
Other
VezekoMOBI3211 Bauwagen 4-Personen Chemie-WC Lager 1300kg 313x217x212cm Mannschaftswagen
Call
Condition: new, overall weight: 1,300 kg, empty load weight: 1,100 kg, maximum load weight: 200 kg, loading space length: 3,130 mm, loading space width: 2,167 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 4 people with toilet and storage.
An insulated *team trailer* is suitable for all seasons. With a sandwich construction in 50 mm and 60 mm insulated floor, it can withstand heat and cold. In winter, the built-in heating provides support. To ensure that the replacement trailer is as self-sufficient as possible, it has a small built-in WC with chemical toilet.
The recreation trailer can be used on any construction site. It can easily be towed to the construction site with a car as a *car trailer* and can also be used as a *burro trailer*.
The standard equipment of the construction trailer includes
an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, ISO floor in 60mm, PVC aud floor, chemical toilet in a small toilet room with washbasin, storage room with outside door and shelf, refrigerator, coffee machine, window with safety cover, 230V fuse box with RCD, sockets, switch and interior light, table and chairs for 4, shelf, coat hooks, four sturdy crank supports, power socket for 230V, connection cable, sturdy frame and galvanized V-drawbar.
Iisdpfx Aoqwi E Iomyei
Further technical details can be found below.
Accessories for construction trailers include a toilet with drain, other sizes for up to 16 people, 100 km/h shock absorber and trailer lock.
Success:
Your message has been sent.
Listing
Bernkastel-Kues
6,997 km
Beverage truck
MERCEDES-BENZ2543 Actros*2x 7,7 m Schwenkwand*kpl Zug*MSH*Ret
Call
Condition: used, mileage: 6,38,000 km, power: 315 kW (428.28 HP), first registration: 07/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 84 m³, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Orten Kettliner curtain-sider body with swinging wall
* Cargo space dimensions: 7,750 x 2,480 x 2,200 mm
* DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL
* Beverage certificate
* Draft beer certificate
* 2 rows of load securing rails
* Lashing rings in outer frame
* Fixed rear wall
* Liftable trailing steering axle
* Retarder
* Long cab
* 1 bed
* Differential lock
* Full air suspension
* Spoiler
* Air conditioning
* Heated seats
* Adaptive cruise control
* Attention Assist, Lane Keep Assist, and Brake Assist
* Automatic transmission
* Euro 6
Iiodpfx Aexvf Dksmyei
together with tandem swinging-wall trailer
* Orten Kettliner
* First registration: 07/2016
* Cargo space dimensions: 7,750 x 2,480 x 2,200 mm
* 18,000 kg
* Payload 13,800 kg
* Lift axle
* Mounting bracket for truck-mounted forklift
----
Special equipment:
Front axle load 8.0 t, audio system: CD radio (Bluetooth), exhaust downwards right, right exterior mirror with maneuvering position, standard and DuoMatic brake connection, additional compressed air connection in cab, additional air tank, high pressure air unit, air horn, cab floor with 170 mm engine tunnel, tinted windshield with sun band, vehicle without trailer coupling, info display 12.7 cm with video function, fuel tank: 390 L aluminium, non-regulated hydraulic steering pump, side engine air intake at cab, roof air deflector (locking), reinforced engine brake, steered and liftable trailing axle, tire pressure monitoring system, spare wheel, spare wheel holder on side, retarder, acoustic reversing warning (external warning signal), fleet management system interface, drawers under window ledge, circuit breaker, cab seats: comfort suspension driver seat, sunblind for side windows, driver and passenger door, steel rims 9.00x22.5, 12V socket passenger footwell, additional 24V socket passenger footwell, automatic daytime running lights, pre-installation for reversing camera
Additional features:
EURO 6 emission standard, axle configuration: 6x2, Actros 4, trailer brake 2-line system, air connections left, 24V / 15-pin trailer socket, exterior mirrors electrically adjustable and heated, rear axle differential lock, steel air tank, driver assistance system: Attention Assist (drowsiness detector), driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keep Assist, cab: width 2.30 m, cab: L ClassicSpace, cab: steel-sprung, comfort, suspension: air / air (full air), electric windows, 100 A alternator, 12-speed gearbox - type: G 211-12, AdBlue tank: 60 L, manually operated roof hatch (steel), rear axle 440 crown wheel, body/chassis: chassis, comfort lower bunk, central locking system, communication interface, radiator grille, two-stage air compressor, engine 10.7 L - 315 kW R6 diesel (OM 470), insulated engine compartment, single-tyred trailing axle, ramp mirror, residual heat utilization, disc brakes on front and rear axles, seat cover/upholstery: fabric, cab seats: passenger comfort function seat, cab seats: driver's backrest foldable, voltage converter 24V / 12V 10 A, front splash guard, front axle stabilizer, additional stabilizer rear/trailing axle, outside stowage compartment left, 24V cab socket, tachograph / EC control unit, extended doors for cab, aerodynamically designed underbody panelling, front underrun protection, CB radio preparation, toll system preparation, cranked front axle, regulated water pump, permissible total weight
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Essen
7,003 km
Low loader semitrailer
FAYMONVILLEMultimax Satteltieflader - hydr. gelenkt
Call
Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below.
Full equipment details on request.
GOOSENECK:
* Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10°
* Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4
* Detachable steel front wall, approx. 400 mm high
* ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches
* Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN)
* On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish
Iijdpfx Ajxarmaomysi
* On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish
* Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin
* 3.5-inch kingpin
* Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
* Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917)
* 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN)
LOADING PLATFORM:
* Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10°
* Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length
* BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics
* 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lifting/lowering valve
* 235/75 R 17.5 3PMSF twin tires – brand at our discretion
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg
* Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements
* At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements
* 1 pair of lashing rings on front cross member (LC 10,000 daN)
* 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks)
* 1 pair of mechanical rear supports
* Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor
* TPMS tire pressure monitoring sensors fitted to all wheels
* Deck locking with conically welded locking profiles every 500 mm
* Lock monitoring left and right on the trailer
* Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended
* 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN)
BRAKING SYSTEM
Success:
Your message has been sent.
Listing
Essen
7,003 km
Tractor unit
MANTGX 33.540 6x4 BL SA mit Fassi F545RA.2.26
Call
Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment. Full equipment details available on request.
* 490 l fuel tank, right side
* 60 l AdBlue tank, left side
* Electronic Braking System (EBS)
* Anti-lock Braking System (ABS)
* Emergency Braking Assistant
* Eco Retarder, speed-dependent, multi-stage, energy-efficient
* Disc brakes on front axle
* Disc brakes on rear axle
* Disc brakes on 2nd rear axle
* MAN D2676 LFBI diesel engine, 397 kW (540 hp) output, 2,650 Nm torque, Euro 6e
* MAN TipMatic 12.28 OD, with Retarder 35
* Transmission designed for increased traction during operation
* MAN TipMatic operation, via stalk, manual (DNR selection, shift strategy)
* MAN EfficientRoll transmission function
Iiodpfxoy Auftj Amyoi
* MAN Idle Speed Driving transmission function
* MAN TipMatic Performance and Efficiency driving programs, up to 70,000 kg
* Front axle tires: Continental 385/65R22.5 Conti ECO HS5 Steering Close TL
* Rear axle tires: Continental 315/70R22.5 Conti ECO HD5 Drive Close TL
* 2nd rear axle tires: Continental 315/70R22.5 Conti ECO HD5 Drive Close TL
* Tire Pressure Monitoring System (TPM), with tire temperature display
* Tire pressure display for trailer 0P3B9 6x4
* Front axle: 10,000 kg, non-driven, cranked, steered, non-liftable
* Rear axle: 13,000 kg, HY axle with through drive, straight, non-steered, non-liftable
* 2nd rear axle: 13,000 kg, HY axle without through drive, straight, non-steered, non-liftable
* Digital axle load display (ALM) for air-suspended axles
* Digital axle load display (ALM) for trailer/semi-trailer
* Parabolic leaf suspension, 4-leaf, steel, front axle
* Air suspension on rear axle
* Air suspension on 2nd rear axle
* Air suspension control for trailer/semi-trailer
* GM cab: the spacious cab (wide, long, medium-high)
* LED Plus package: main headlights, fog lights, cornering lights
* Main headlights, LED
* Daytime running lights, LED
* Fog lights, LED
* Cornering lights, LED
* Side indicator lamps, LED
* Mirror package: exterior mirrors, electrically adjustable, heated, front mirror, curb mirrors both sides
* Exterior mirrors, electrically adjustable with maneuvering aid, heated
* Curb mirror, left side, electrically adjustable, heated
* Curb mirror, right side, electrically adjustable, heated
* Front mirror, manually adjustable
* Premium driver’s seat package, air suspended, seat heating and seat ventilation
* Comfort driver’s seat, air suspended, with lumbar support and shoulder adjustment
* Seat ventilation, driver’s seat
* Basic co-driver’s seat package, non-suspended, adjustable (fore-aft, backrest, height)
* Co-driver’s seat, non-suspended, fore-aft, backrest, and height adjustable
* Electronically controlled steering system MAN ComfortSteering
* Professional 12.3-inch instrument cluster
* Digital tachograph with remote communication (DSRC compliant), CONTINENTAL
* Electric stationary air conditioning system
* Air conditioning, Climatronic
* Additional water heater, 4 kW
* Electronic Stability Program (ESP)
* Traction Control System (ASR)
* ACC Stop-and-Go Cruise Control, adaptive distance control
* Adjustable speed limiter (engine governed)
* ECO settings for cruise control, basic setting
* Emergency Brake Assistant EBA, non-deactivatable
* MAN EfficientCruise function with PredictiveDrive
* Lane Departure Warning (LDW), non-deactivatable
* Lane Change Assist (LCS) and Turning Assist
* Driver Attention Warning MAN Driver Mo
Success:
Your message has been sent.
Listing
Remagen
6,983 km
Heavy-duty truck
MERCEDES-BENZ4152/LS/ 8x4/SLT/BIG SPACE
Call
Condition: used, mileage: 3,39,000 km, power: 380 kW (516.66 HP), first registration: 10/2015, fuel type: diesel, overall weight: 41 kg, axle configuration: > 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, navigation system, parking heater, Mercedes 4152 LS/ SLT/ 8x4/ German vehicle/ New retarder at 317,000 km! Engine 16 L displacement!
Front axle load 9.0 t, work lights, audio system: CD radio (Bluetooth), CB radio, 2 air horns on cab roof, 24V / 100A electrical pre-fitting in cab, suspension: front springs 9.0 t, 3-leaf, vehicle without stability control, 150A alternator, 16-speed gearbox - Type: G 280-16, 12.7 cm info display with additional gauge, automatic climate control, cool box / fridge, unregulated power steering pump, air intake behind cab, 2-cylinder compressor, rear engine PTO 650 Nm, reinforced engine brake, reinforced engine mounting, parameterizable special module, retarder, acoustic reversing warning (external warning signal), circuit breaker, cab seats: co-driver seat with armrest, cab seats: driver's comfort air-suspended seat, external sun visor, additional stabilizer, rear axle/tag axle, steel rims 9.00x22.5, stand-alone air conditioning, 12V socket front passenger footwell, extra 24V socket front passenger footwell, Fleetboard pre-fitting, additional thermal insulation, twin-disc clutch, gearbox oil cooler
Iijdey E U T Njpfx Amyoi
Emission standard EURO 6, axle configuration: 6x4, Actros 4, trailer socket 24V / 15-pin, electrically adjustable & heated exterior mirrors, rear axle differential lock, steel air tanks, medium compressed air unit, Assistance system: Attention Assist (fatigue detection), assistance system: Brake Assist (Active Brake Assist), assistance system: Lane Keeping Assist, cab: L BigSpace, steel sprung cab, comfort features, suspension: leaf/air, electric windows, tinted windshield, AdBlue tank: 60 liters, rear axle crown wheel 300, body/chassis: tractor unit, lower comfort bunk, comfort central locking system, communication interface, 3-piece fenders, fuel tank: 290 liters aluminum, radiator shutter, engine 15.6 L - 380 kW R6 diesel (OM 473), engine compartment encapsulation, ramp mirror, residual heat utilization, disc brakes front and rear axles, seat cover/upholstery: fabric, cab seats: co-driver functional seat, cab seats: foldable driver's seat backrest, voltage converter 24V / 12V 10 A, front spray protection, front axle stabilizer, external left storage compartment, cab 24V socket, tachograph / EC control device, cab door extension, aerodynamically shaped underbody panel, front underrun protection, toll system preparation, cranked front axle, regulated water pump, permissible gross vehicle weight 41.00 t, additional heater (water)
Success:
Your message has been sent.
Listing
Spain
6,946 km
AIDA 315/2MR/LD/TE3
AIDA315/2MR/LD/TE3
Call
Condition: ready for operation (used), Year of construction: 2016, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details.
• Main technical data:
• Press capacity: 315 ton
• Rated press force: 3,150 kN
• Rated capacity point: 12.7 mm above BDC
• Normal crankshaft stop position: TDC
• Stroke length: 250 mm
• Slide adjustment: 160 mm
• Shut height: 700 mm
• Slide speed: 15–40 strokes/min
• Maximum flywheel speed: 628.5 rpm
Iisdpfx Aezcpwismyji
• Maximum clutch engagements: 24/min
• Stopping time: 0.386 s
• Safety distance: 618 mm
• Die and working area:
• Maximum die size: 2,250 × 750 mm
• Maximum die weight on slide: 10,200 kg
• Machine structure:
• Frame design: double upright (straight-side) frame
• Drive system: double connecting rod (double pitman)
• Slide guidance: guided slide
• Motion type: mechanical crank press
• Slide movement: vertical reciprocating motion
• Main axis movement: rotary crankshaft drive
• Ram/slide adjustment: motorized
• Cushion system:
• Type: integrated drawing cushion
• Maximum cushion force: 3,450 daN at 0.6 MPa
• Auxiliary systems:
• Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar)
• Clutch & brake system: pneumatic
• Lubrication system: centralized automatic lubrication
• Safety system: integrated
• Operator protection: included
• Automation ready: yes
• Performance and safety highlights:
• High-rigidity double-upright frame construction
• Double-pitman drive for improved slide parallelism and load distribution
• Pneumatic clutch-brake for reliable operation and fast stopping
• Integrated safety and operator protection systems
• Designed for integration with automatic feeding and transfer systems
• Auxiliary systems:
• Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included)
• Clutch & brake system: pneumatic (Included)
• Lubrication system: centralized automatic lubrication (Included)
• Drawing cushion: integrated (Included)
• Safety system: integrated (Included)
• Operator protection: yes (Included)
• Automation ready: yes (Included)
• Other optional equipment: Not included
Technical Specification
Stamping Force 3150 Kn
We make it easier for you to find: "crank"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Crank (570)
Search Machineseeker now with more than 2,00,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month






































































































































































































































































































