Used Cross Blade for sale (9,480)

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. Hsdpsz Hbm Tefx Airew The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 810 mm, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, overall weight: 930 kg, outer diameter: 810 mm, We are offering this ready-to-use Volmer CHC 025 saw blade grinding machine, manufactured in 1995. This machine is specifically designed for the precise grinding of the front and rear faces of carbide circular saw blades ranging from 80 to 810 mm. If you have any questions or would like more information, please feel free to send us a message or call us. Hedoz R Srwopfx Airew

Condition: good (used), functionality: fully functional, Multi-blade saw H 33. Chain bed width 250 mm. Maximum cutting height 100 mm. Feed rate, continuously adjustable up to 25 m/min. Drive motor 22 kW. Double anti-kickback protection. Hedpfxo Af Imze Airew Includes a wide range of accessories, such as bushings, spacer rings, and saw blades. Ideal for cutting stacked strips.

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Stegherr Cross rung milling machine TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base EUR 1.070.00 Foot switch EUR 900.00 Adjustment optics EUR 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece EUR 650.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) EUR 190.00 HM saw blade, price EUR 170.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price Hjdoyrtzqjpfx Airow EUR 700.00 per individual tool Packaging in a crate (suitable for land transport) EUR 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) EUR 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment chain width 230 mm Hjdpfx Aszv Uyusirsw motor 22 kW max. cutting height without pressure comb in fixed position: 130 mm max. cutting height without pressure comb with movable blade: 95 mm with pressure comb: 15 mm less cutting height still in good condition

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Width: 30-200mm High: 13-50mm Length: 2-6m Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Hjdsv Tlgdopfx Airow Possible to scan different profiles

Condition: used, Year of construction: 1973, operating hours: 3 h, functionality: fully functional, machine/vehicle number: GM900, total length: 17,100 mm, total height: 4,340 mm, total width: 3,363 mm, overall weight: 7,000 kg, frame height: 4,340 mm, frame width: 2,780 mm, For sale is a cross-flow shredder mounted on a VOEST GM900 frame. The cross-flow shredder can be operated with two or three chains. The shredding chamber is open and can be equipped with different grating grids. After shredding, a permanent overband magnet is installed. The system control was newly purchased and installed. The system can be disassembled for transport. Hjdpfx Asz Sp Ecoirsw

Condition: new, CATALOGUE NUMBER RE041 - new machine TECHNICAL DATA - saw blade diameter ⌀250 – 350/30 mm - scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - main motor power 4 kW - scoring motor power 0.75 kW - rotational speed 4000 rpm - scoring blade rotational speed 8800 rpm - blade tilt 0 – 45° - max. cutting length 2000 mm - cutting width with parallel fence 1250 mm - splitter ⌀350 mm - spindle flange diameter 87.5 mm - table fence adjustable to 90° – 45° angle, accuracy ±1° - max. cutting height with ⌀300 mm blade 95 mm - max. cutting height with ⌀350 mm blade 120 mm - upper dust extraction port diameter ⌀80 mm - lower dust extraction port diameter ⌀100 mm - weight 620 kg - dimensions of folded machine (length/width/height) 2255x3460x1450 mm Net price: 19900 PLN Net price: 4628 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR Hodpfx Ae Aggdzjirow (price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2017, Optimized miter saw Manufacturer: Salvador Type: SuperCut 500 Year of manufacture: 2017 Technical data - Saw blade diameter: 500 mm / 450 mm - Maximum feed rate: 200 m/min - Working height: 900 mm - Compressed air consumption: 400 Nl/min - Compressed air supply: 6 bar - Minimum connection power: 14 kW - Extraction speed: 45 m/s Hedps Ad Ighefx Airow Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), functionality: fully functional, Multi-blade saw H 33. Chain bed width 250 mm. Maximum cutting height 100 mm. Hedpfo Af Im Nsx Airjw Feed rate, continuously adjustable up to 25 m/min. Drive motor 22 kW. Double anti-kickback protection. Includes a wide range of accessories, such as bushings, spacer rings, and saw blades. Ideal for cutting stacked strips.

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Spindle diameter: 50 mm Bushing diameter: 70 mm Bushing equipped with spacer rings Hedpjz Enhzsfx Airsw Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: excellent (used), functionality: fully functional, maximum cutting width 250mm Hodozz N Nzepfx Airew infeed table length 3m outfeed table length 3m year of manufacture 2003 engine power approx. 2.2 kW power supply 400V weight 600 kg CE marking dimensions of the cutting unit: 675x85x145cm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Key features and advantages: PLC control: Intuitive touchscreen panel for easy programming. Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Saw motor power: 7.5 kW. Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Hedpozzw Uljfx Airew Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84 kW Multi-blade saw Dimensions Length: 3440 mm Width: 1900 mm Height: 1700 mm Cutting parameters Maximum diameter of logs to be sawn: 450 mm Diameter of circular saw: 630 mm Minimum width of the center stack: 60 mm Maximum number of saws per spindle: 4 2 spindles, one on top, one on the bottom Motors Power of the motor for the lower drive: 52 kW Power of the motor for the upper drive: 41 kW Spindle speed: 1480 rpm Infinitely variable feed speed: 0–15 m/min (0–25*) Power of the motor for the feed drive: 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length The multi-blade saw is immediately available and ready for use. Hjdoz H T Ayopfx Airew Loading onto the truck will, of course, be handled by us.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Vollmer sharpening machine for band saws, robust design. Blade width up to 360 mm. 2 switchable tooth profiles. Hodpjz Ad R Nefx Airew Grinding wheel: CBN, 250 mm diameter, or ceramic grinding wheels.

Condition: used, Year of construction: 2023, grinding range 1000 mm Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Hedj Ad Rmqopfx Airew

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, maximum distance between units: 3.3 m two motors, 2.2 kW each blade tilt adjustable cutting angle in the range of -45/+45 degrees maximum blade diameter: 330 mm pneumatic clamping devices blade speed: 3765 rpm CE marking Hodpszxpr Djfx Airjw

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Band saw blade grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes can be selected Operating manual available Feed rate: 30 or 60 teeth per minute. Hsdpfx Aez Uq E Ajirsw

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: AB00035080, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,112 kg, Equipment: CE marking, documentation/manual, saw blade guard, SCM Class SI 400ep panel saw with blade guard, CE version, manufactured in 2025. Equipped with a miter fence with 3 LCD screens for positioning the stops, automatic adjustment with 2 axes for the scoring unit, a chassis for miter operations with the CompeX system, and an extended support table for panels with a roller conveyor on the side of the parallel fence. Hodoz Ngglopfx Airow

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls smooth, sliding roller roller with saws smooth, sliding roller – bottom: guide pawls track 2 feed speed settings + stepless adjustment central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approx. 1800kg Hjdsztad Tjpfx Airow – made in Italy – DTR documentation available – robust machine – used multi-blade saw, very good condition Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Hjdpjzxxmkjfx Airjw Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2016, WEINIG OPTICUT S50 – OPTIMIZING SAWMILL For sale: a professional Weinig OptiCut S50 optimizing sawmill. The machine is from 2016 and is in perfect technical condition. It is currently connected and operational, allowing for a demonstration during operation. Machine specifications: Hodpfx Ajz Du Hboirjw • Model: Weinig OptiCut S50 • Year of manufacture: 2016 • Overall length: 11.30 m • Width: 1.40 m • Condition: excellent • Machine connected and ready for operation • Available from 10.10.2026 The machine can be inspected and tested before purchase.

Condition: used, Year of construction: 2019, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 400 mm, saw blade diameter: 370 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 3,800 rpm, total length: 2,500 mm, total width: 2,260 mm, total height: 2,000 mm, overall weight: 6,500 kg, table height: 700 mm, Equipment: CE marking, documentation/manual, The Multilama or multi-blade circular saw, model SQUALO 420, is a technologically advanced machine that is easy to use, precise, and extremely reliable. It is an essential tool for a modern sawmill, optimizing the production of sawn timber. Hsdjzzad Nopfx Airjw It is ideal for producing slats, squares, lumber, profiles, edged boards, prisms, boards, and pallet components.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For sale is a professional, automatic multi-blade ripping saw WEINIG RAIMANN VarioRip 310, designed for precise and efficient longitudinal cutting of solid wood. The machine was ordered in 2021 from WEINIG Vertrieb und Service GmbH & Co. KG. It is an industrial-grade machine from the renowned WEINIG / RAIMANN brand, designed for intensive production work. Machine number: 2108.20. Key parameters: Main motor: 30 kW / 40 HP Arbor diameter: Ø 65 mm Arbor speed: 4200 rpm Blade diameter: 300–350 mm Infinitely adjustable feed rate: 5–35 m/min Width of conveyor chain: 340 mm Hsdpfx Aisz Eghmsrjw Max. overall infeed width: 650 mm Min. cutting height: 15 mm Power supply: 400 V / 50 Hz Color touchscreen: 3.5" CE compliant The machine is equipped with a hydraulic quick-clamping system for blades (Quickfix) and 4 Quickfix collars, allowing for the mounting of 4 blades. Additional equipment includes a laser pointer indicating the cutting position, which facilitates accurate material alignment. Precise material transport The VarioRip 310 features a robust, prism-guided conveyor chain with a width of 340 mm. The system used ensures precise material guidance and high stability during cutting. The machine has automatic chain lubrication and oil level monitoring. The chain is equipped with steel spike-type elements that improve the guidance of crooked, warped, and short pieces of wood. Safety and equipment The machine has a RAIMANN SafetyPlus system, anti-kickback and anti-splinter protection, a Kevlar curtain, a locking guard, and emergency stop switches. The control panel displays, among other things, the machine load, power consumption, operating hours, and error messages. Dimensions: approx. 1700 × 1800 × 1500 mm Weight: approx. 1900 kg Working height: 850 mm The machine is ideal for companies involved in the serial cutting of wood, the production of moldings, furniture components, joinery, and other solid wood components. Price: 45,000 EUR net.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE Hedszzrutepfx Airsw