Used Cross Conveyors for sale (13,672)

Condition: ready for operation (used), The subject of my auction is a conveyor belt with a length of 4.4 m and a belt width of 0.4 m. Possibility of transport. Lrodeyikdnjpfx Advoi

Condition: good (used), Gravity Flexi Roller Conveyors in Stock 3 Conveyors available Dimensions Conveyor 1, 3240mm closed x 560mm wide double plastic rollers, height 680mm fully adjustable Conveyor 2, 750mm closed - 2160mm fully open x 500mm wide steel rollers, height 8000mm fully adjustable Lrjdpfx Adjyr Nuajvji Conveyor 3, 1350mm closed - 4500mm fully open x 500mm wide plastic rollers, height 770mm fully adjustable

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Lredou Tg I Dspfx Advoi Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/2000 x 440 mm - Parts pick-up 720 mm, ascending conveyor 2000 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Useful width = 440 mm Belt width = 510 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 750 mm, at 50° = 1,400 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request Lrjdpfetmtzysx Advoi FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/1800 x 340 mm - Parts pick-up 720 mm, ascending conveyor 1800 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Effective width = 340 mm Belt width = 410 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 650 mm, at 50° = 1,250 mm Lrodetmty Ejpfx Advei - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.

Condition: used, functionality: fully functional, Year of construction: 2022, Item no.: 1000003766 Used conveyor belt driven - 1.520 mm Technical data: Ledpfsm Twvdex Advsri Manufacturer: MB Conveyors Year of construction: 2022 Overall dimensions: 1.520 x 540 x 320 mm (LxWxH) Conveyor length: 1.400 mm Conveyor width: 400 mm Cheek height: 110 mm belt type: PVC, smooth Gear motor: included - gear construction NORD 50 Hz - 230/400V - 0,18 kW Conveying speed: constant 0,1 m/s Condition: used / fully functional Function test: Ok OPTIONAL: Supports (height freely selectable), Electrical connection (ON/OFF) EMERGENCY STOP button Frequency converter

Condition: ready for operation (used), Year of construction: 2021, Turns: 3.25, infeed: south, outfeed: West, infeed height: 3700mm, outfeed height: 1000mm, transport direction: downwards, max. belt speed: 40m/min, max. belt load: 45kg/m. Including an external control cabinet. Documentation available. On-site inspection is possible. Ledpfx Adjwz N T Aoveri

Condition: excellent (used), Year of construction: 2021, Conveyor belts MB Conveyors Type: N-TR BJ 2021 L. 2.0 meters B. 0.50 meters Lrjdpfsvy Amhjx Advoi H. Up to 0.95 meters

Condition: excellent (used), Year of construction: 2020, STROAGE system Ledpfx Adev Uacijvjri MB Conveyors Year of manufacture 2020

Year of construction: 2007, condition: good (used), MB Conveyors Italy PA ALL (2007) Lsdpfx Adju Acqpovori • Length: 357 cm • Width: 60 cm • Height: 215 cm

Condition: used, Year of construction: 2018, overall weight: 70 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: MB Conveyors Type: PA_ALL 2470 x 500 Ledpfx Ajthwrtjdvsri Condition: gebraucht CONVEYOR: - Effective length: 2470 mm Effective width: 500 mm Height min. / max.: 800 / mm Total installed power: - Other equipment: PU Gurt, Lichtschranke, Abräumtaste CONTROL: - Bildschirmsprachen: - Operating manuel: - GENERAL DATA: - Total weight: 70 kg Total size L x B x H: 2,5 x 0,6 x m

Condition: used, ROLLER ELECTRIC CONVEYORS SYSTEM 120M Stainless still Consists: 4 conveyors x 15m length 2 conveyors x 17m length 2 conveyors x 10m length 5 conveyors kurve 90 Roller width: 50 cm Roller diameter: 50 mm Drive motor system Lrjdpfx Adew D Raisvoi Height frame: 20cm Conveyor speed: please contact us Excellent condition

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM Lrodpfx Adefv Hphovji The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Roller conveyor with chain cross conveyor Ledpfx Adsi Sdk Ssveri Can be used after resaw. - Electric motor: 1,1 kW - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 580 mm, total width: 665 mm, total height: 220 mm, total length: 2,990 mm, conveying length: 2,800 mm, TAF article number: 1000003717 Manufacturer: Best Conveyors Year of construction: unknown Overall dimensions: approx. 2,990 x 665 x 220 mm (LxWxH) Cheek width: 2 mm Cheek height: 220 mm Lrsdpjuq Hrlofx Advsi Conveyor length: 2,800 mm Conveyor width: 580 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 100 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 8,000 mm, conveyor belt width: 800 mm, total length: 23,000 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, ID43709 MACHINE: Telescopic Boom Conveyor BRAND: FMH Conveyors Best Reach TYPE: BR3150-800 YEAR: 2018 Lsdewhdd Nspfx Advori LENGTH RETRACTED: 8m LENGTH EXTENDED: 23m

Condition: good (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 800 mm, total length: 21,500 mm, input voltage: 380 V, MACHINE: Telescopic Boom Conveyor FIRE: FMH Conveyors. Best Reach Lodpswhc Ugsfx Advsri TYPE: BR4140 YEAR: 2009 LENGTH RETRACTED: 6.5m LENGTH EXTENDED: 21.5m

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, plate length: 2,800 mm, plate width: 1,300 mm, TECHNICAL DETAILS Max. panel width: 1,300 mm Max. panel length: 2,800 mm EQUIPMENT Lodpsyq E S Sjfx Adveri 180-degree panel tilting system The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6327

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Lodpfx Asyu If Nedvsri MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Lsdpfx Adoywtr Usveri Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA Lodpfxjywtpte Advjri - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: new, Year of construction: 2023, total length: 40 mm, total width: 1,000 mm, Empty weight: 37.000 kg Productivity: 1000 tph 1000x44400mm radial telescobic conveyor General Tech Spec of 150 Feet Radial Belt Conveyor Drive System Direct Accoupled Drive Drum 323* 12 mm rubber coated Reducer Yılmaz KR Series-VOLT 50hz-380V Bed Type SNH Series Felt Cast Iron Bed with Over Lubrication Platform Single Sided Walkway on main belt Band Tape TS 542 Norm 4 Layers, 4/2,10mm Width Lodpjx D A S Uofx Adveri Direction Roll 12 units Nominal Capacity 800-1000 tph Drive 2.5” Standard Kingpin Paint Acrylic Raised stockpile height 15 meters Lowered stockpile height 4,3 meters Belt widths: 1200mm(26 meters)-1000mm(22 meters) Stinger width 1000* 19000mm Radial Drive Eletrical Motor/Gearbox connected to wheels by chain Radial Move 5 degrees Belt Rear Mounted on static pivot Stockpile capacity at 270 degrees15m height 140900 metric tons Drum 323mm dia, anti material sticking Main Belt 2x22 kw Motor Gearbox Stinger Belt Conveyor 2x22 kw Motor Gearbox Radial Tires 8 pcs- 315*65*22,5 Chained to Motors Radial Drives 2 pcs 3 kw Motor Gearbox Total Power 95 kw Transport Weight 35 tons Transport Dimensions 4400x29300x3500mm Control Full Automatic remote controlled Automation component Siemens Radial Tyres Hydraulic Swing for erection Erection Hydraulic Jacks for elevation Scraper Available at main belt and receiving hopper Cleaning Both belts have cleaning scraper under drive drum Receiving Chute included Discharge Chute to stinger belt Included Impact rolls Included at receiving chute section Control panel LCD screen and piano panel for back-up With Polypole automatic piling software and Siemens PLS option Fast delivery, high,quality, economical

Condition: ready for operation (used), Powder dispenser, screw conveyor, screw mixer, Z-arm mixer, used machine Overall dimensions : 1350 x 750 x 1190 mm Electrical data: 230/400 V ; 0.43 kW ; 50/60 Hz Ljdpfx Adoyvfr Njvori The screw conveyor has a double-bearing design and is equipped with a cover that opens under the effect of the material flow.

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed Ledpfx Aogvvn Ejdvori dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, STORE LOADER TELESCOBIC BELT CONVEYOR. 400V - 50 Hz 5,5KW Min Lenght : 14.8m - Max Lenght : 25m Max Height : 12m Belt Width: 1000 mm Lsdpfx Adjx U Ar Eeveri Belt Speed: 0,1 - 1,1 m/s Total Weight: 9.540 kg Max. Loading 30 kg/m