Used Cross Cut Miter Saw for sale (27,637)

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, - Complies with CE standards. - Used for cutting aluminum PVC profiles Djdpfx Adorahzgekowc - Hydro-Pneumatic cutting process - Adjust cutting speed according to profile - Right and Left -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 can cut at fixed angles. - Pneumatic vertical and horizontal press - Ø550 millimeter Aluminum saw with diamond tip - Roller conveyor is available (3 meters right and left) - Oil spray system - 3 Kw Motor and Hydro - check for precise cutting

Condition: used, Year of construction: 1996, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 272 / 9-604, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, main saw diameter: 300 mm, total width: 5,700 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee. Dedpfx Adow I Er Tokjwc

Condition: new, Year of construction: 2025, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor Dwedpsv Iccfsfx Adkoc • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 319 00 00347, Schüco double aluminium-profile cutting saw Djdpjwbt E Nofx Adkjwc

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen chalk line cutting working according to program 1 pcs pusher for cut off pieces Dsdpfx Adjdify Iskswc hydraulic saw blade movement machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm work piece feeder system with toothed belt feed speed 120 m/ min cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. Dodehvrz Tepfx Adkswc 6.000 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, Optimising Circular Cut off Saw with Sorting table with 18 pushers - MOST doo Slovenia Dedpfev Tb H Hox Adkowc with 7.5 KW Servo, automatic adjustment of thickness, with in feed conveyor with 4 seperators

Year of construction: 2012, condition: excellent (used), Motor 400 V / 2.4 kW Tool diameter 250 mm Tool bore diameter 40 mm Dwodpswu Ikmsfx Adkjc

Year of construction: 2023, condition: ready for operation (used), An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Dedpsw D Et Rofx Adkjwc

Condition: good (used), Blade diam 420mm, lenght 4,800mm. Dwjdpfowzvacjx Adkjc

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Sawmill Viking VBS1100 SB(1) Condition: NEW! Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Roller diameter: 950mm Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Dodpfx Adswzavuskjwc Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Condition: good (used), Year of construction: 1992, functionality: fully functional, cutting height (max.): 130 mm, cutting length (max.): 400 mm, overall weight: 1,400 kg, Monitored saw blade cover; cuts at 90° profile height 130 mm and profile width 400 mm, at 45° = 130 x 280 mm at 30° = 130 x 195 mm. Acute angle cutting at 30° right and left. Dodpfx Aswm Rl Dsdkewc - hydraulic material clamping vertically and horizontally - hydraulic stepless saw feed - clamping pressure adjustment - original Trennjaeger stops are available. .

Condition: used, Year of construction: 1980, functionality: fully functional, Canali Band Saw TB 1100 Manufacturer: Canali Germany Year of manufacture: 1980 Band Saw with center cut centering Roll diameter: 1100 mm Max. saw blade width: 100 mm Roll width: 90 mm Max. saw blade length: 6800 mm Min. saw blade width: 6500 mm Main motor: 22 kW Infeed device tilt adjustment: 0-45 ° Feed speed: 0-30 m/min Feed chain height: 300 mm For center cut, clearance width: 300 mm Dwjdpov Ny S Tofx Adkjc To the left of the saw blade: 150 mm Saw blade tension: manual 400 V / 50 Hz Weight: 3500 kg Technical specifications subject to change

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 520 mm, cutting height (max.): 200 mm, feed length X-axis: 420 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, space requirement length: 8,800 mm, space requirement width: 1,200 mm, length stop: 8,800 mm, pressure: 5 bar, power: 5.5 kW (7.48 HP), workpiece height (max.): 200 mm, Equipment: double-sided, Mobile saw base frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 - 5960 mm, with digital LED measurement display, measuring length including extension approx. 8800 mm, Dwjdpfx Adjv Hhg Tjkoc Saw base frame with 6 crank supports ensure safe standing when working. With electrical power distribution and 3-way socket 230 V Mobile saw base frame Beck ESF 1, saw ZS 200 mounted on base frame

Condition: excellent (used), functionality: fully functional, Tenoning machine with cut-off saw AIRONE Specification: • condition - used, after inspection • manufacturer - AIRONE • machine equipped with a cut-off saw, two heads for giving thickness and a head for milling the processed element • engines - 2.5 and 3 HP • disc diameter 250 mm • maximum thickness of the processed element - 60 mm (distance between horizontal heads) Dsdpfewmw Aiox Adkswc • diameter of the tenoning head 250 mm, adjustable up/down • hand-pushed trolley with mechanical pressure • original painting • weight approx. 500 kg • dimensions 150 x 100 x 120 cm (length x width x height) Additional information: • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site.

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg Dwsdpowiipmsfx Adkjc

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Dodpfx Adowprmzokswc Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: used, Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler -Double miter saw: saw unit right and left from automatic saw, drill / mill Rapid DGL / BFA -Motor: Himmel 3.0 kW / 2790 rpm -Saw unit: swivels 45 ? -Saw blade: O 410 mm -Price / fee: complete -Dimensions: 1060/760 / H680 mm Dodpfxegzc Iyo Adkowc -Weight: 240 kg

Condition: excellent (used), Miter circular saw make KALTENBACH type TL 250 for aluminum and plastic profiles Dwjdpfx Adjmrq Eveksc Saw blade diameter 250 mm

Condition: good (used), functionality: fully functional, saw blade diameter: 300 mm, cutting width (max.): 145 mm, type of input current: three-phase, cutting depth: 90 mm, OMS FC300R miter saw with extraction Dwjdpfjv Nwrqex Adksc Specification: • blade diameter 300 mm • saw motor 2.5 HP • max dimensions of the cut element: 90 x 145 mm (height x width) • own, internal sawdust extraction • guards on the saw to ensure the safety of the saw operator • cutting adjustment +/- 45 degrees • overall dimensions 65 x 81 x 145 cm (length x width x height) Additional information: • the machine is in very good technical condition, ready for immediate use • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Dedpfx Asvz Hf Dedkswc Weight 80 kg Total power requirement 0,75 kw

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler Dedpfx Adsgy Dbdekowc -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Condition: excellent (used), saw blade diameter 350 mm Dedeiqy Abopfx Adkswc

Condition: good (used), functionality: fully functional, total length: 1,000 mm, total height: 1,600 mm, total width: 800 mm, type of input current: three-phase, OMS FC 350 R miter saw Dsdpfev Dgmyox Adkswc Specification: • manufacturer - OMS • model - FC 350 R • blade diameter - 350 mm • saw motor - 2.2 kW • max. dimensions of the cut element at a right angle 115 x 150 mm (height x width) • guards on the saw to ensure the safety of the saw operator • extraction nozzle fi 60 mm • cutting adjustment +/- 45 degrees • overall dimensions 100 x 80 x 160 cm (length x width x height) Additional information: • the machine is in very good technical condition, ready for immediate use • the photos shown show the actual condition of the subject of sale • possibility of switching on and checking the device on site. • the price given in the auction does not include VAT and transport costs

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler Dodpegylq Iofx Adkowc -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 420 x 30 mm -Price/delivery: complete -Total dimensions: 1200/800/H690 mm -Total weight: 234 kg