Used Ctx 600 for sale (21,865)

Year of construction: 2007, condition: good (used), TECHNICAL DATA Extruder "A" 135/33 L/D • Output max. LLDPE 950 kg/h Extruder "B" 60/28 L/D • Output max. VLDPE 200 kg/h Extruder "C" 60/28 L/D • Output max. LLDPE 200 kg/h Raw materials: LLDPE MFI 2 - 5 g/10min VLDPE MFI 2 - 5 g/10min Coex Structure 3 layer Film thickness range for stretch wrap film 11 - 45 μm Final film width 4 x 500 mm // 8 x 250 mm // 2 x 750mm + 1 x 500mm // 2 x 750 mm + 2 x 250mm • Flat die lip width 2.550 mm • Roller width 2.700 mm • Chill roll C1 Ø 1.000 mm • Chill roll C2 Ø 400 mm • Mechanical speed max. 600 m/min • Installed electrical power for one line approx. 1.022 kW • Utilisation factor approx. 40 - 50 % of total value • Necessary cooling capacity approx. 492 kW approx. 422.882 kcal/h • Compressed air consumption approx. 60 Nm³/h Ndodpfx Aaoqk T Dio Isc

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Nedjign Efjpfx Aa Isdc

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 11,217 h, load capacity: 4,000 kg, lifting height: 3,800 mm, fuel type: electric, mast type: standard, construction height: 2,750 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Ndsdpew Ncxtsfx Aa Iec Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 80V Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press -Clamping surface: 700 x 600 mm -Opening: 250/250 mm -Plate height: 205 mm -Dimensions total: 700/600/H205 mm Ndjdpfx Aow Dccvea Isc -Weight: 207 kg

Condition: excellent (used), functionality: fully functional, pressure: 16 bar, operating pressure: 16 bar, For sale is a Loos steam generator with oil burner. Gas burner available upon request. Steam output: 600 kg/h. Maximum steam pressure: 16 bar. Ndjdpfx Aaow Hqzxo Isc Very good condition. Delivery available at extra cost. If you have any questions, feel free to contact us.

Condition: used, functionality: fully functional, machine/vehicle number: H2X387G01100, Year of construction: 2016, operating hours: 10,213 h, load capacity: 2,500 kg, lifting height: 4,830 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,150 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X387G01100 Ndodew S Af Sopfx Aa Isc Load center: 500 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Sideshift, 3rd valve, interior mirror,

Condition: like new (used), “Herbold 600/1000 – Granulator / Shredder” for Sale Also many other manufacturers like: Pallmann / Lindner. Find our complete stock on our website. Ndjdpfx Aaeggfkbs Ioc Manufacturer: Herbold Type: 600/1000 Electrical Motor: 55 kW Included

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Ndsdpfx Ajt R Tq Ioa Isc

Condition: used, Year of manufacture: 2002 Connection: 400 V, 200 A Nedpfxowxv E To Aa Iodc Power: 80 kW Clamping force: 4,000 kN Net weight: 45 t Press dimensions: 3,500 x 2,400 x 3,900 mm (LxWxH) Including pictured accessories. The machine is located at the Schlotheim site and has not been dismantled. The price is quoted without dismantling and loading.

Condition: used, machine/vehicle number: 12833, Year of construction: 2017, operating hours: 6,500 h, load capacity: 5,000 kg, lifting height: 4,630 mm, free lift: 1,530 mm, load center: 600 mm, construction height: 2,500 mm, fork length: 2,400 mm, front tire size: 355/45-15, rear tire size: 21x8-9, overall weight: 8,109 kg, enginetype: Electric, manufacturer: Still Ndedpsw R Ah Djfx Aa Isc

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 6,927 h, load capacity: 5,000 kg, lifting height: 3,200 mm, fuel type: diesel, mast type: standard, construction height: 2,620 mm, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Nodpju Adqqofx Aa Ijdc Sideshift, 3rd valve, heating, STVZO, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,456 h, load capacity: 5,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: standard, construction height: 2,620 mm, drive type: Treibgas, LPG forklift Njdew E Umpjpfx Aa Ijdc ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good 3rd valve,

Condition: ready for operation (used), Grinding width 600 mm First rubber roller Second rubber roller + shoe with manual adjustment 2 conveyor feed speeds Pneumatic oscillation Paper 1520x600 380 V Year of production 2001 Ndedsw Drfmjpfx Aa Isc

Condition: good (used), Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, Trace -External dimensions: 600/395/H50 mm -Number: 347 boxes available -Price: per piece -Minimum order 10 pieces -Weight: 0.8 kg/piece Njdpfxovalvlj Aa Iodc

Year of construction: 2025, condition: new, Brush ageing machine Valmec 600 Ndedpfxogk T Eto Aa Isc working width 600 mm feed speed 4-12 m/min motor power 2 x 4kw two brushes in set, wire + tynex independent height adjustment of brushes power supply 400V machine new

Condition: used, machine/vehicle number: 12067, Year of construction: 2020, operating hours: 6,641 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,480 mm, load center: 600 mm, construction height: 2,500 mm, fork length: 2,400 mm, front tire size: 355/45-15, rear tire size: 21x8-9, overall weight: 6,000 kg, enginetype: Electric, manufacturer: Still Njdpfx Ajw R Aggoa Iodc

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,804 h, load capacity: 3,000 kg, lifting height: 4,830 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift truck Load centre: 600 mm ISO class: ISO class 3 = 2,500 – 4,999 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: good Front tyres type: Non-marking Front tyres condition: 20 – 40% Rear tyres type: Superelastic Rear tyres condition: 40 – 60% Battery voltage: 80V Battery type: PzS Battery year: 2024 Nodpfxowxh A Ds Aa Ijdc Description: The vehicle is UVV-tested. Before delivery, the machine will receive maintenance and will be cleaned. Painting is available on request for an additional charge. Rotator, side shifter, fork positioner, 3rd valve, 4th valve, front working lights, heater, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,000 h, load capacity: 3,000 kg, lifting height: 6,130 mm, free lift: 1,944 mm, fuel type: electric, mast type: triplex, construction height: 2,724 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Mast type: Triplex Condition: Ready for operation and fully functional Ndjdpfjw Ntnrox Aa Ioc Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Fork positioner, 3rd valve, 4th valve, rear work light, front work light, LED, Linde-ROADSTER!

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled Type series: T-40/600 Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm Outer dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth, approx. 1850 mm Temperature working range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K temporally heating speed: 2,5 K/min cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz rated power: approx. 5,5kW rated current: approx. 8,5 A Refrigerant: R404A Weight: 550 Kg Type: T-40/600 /011232 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Ndjdpfx Ashxyg Hja Isc Further questions we can answer on the phone for you.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,032 h, load capacity: 2,500 kg, lifting height: 4,015 mm, free lift: 1,874 mm, fuel type: gas, mast type: duplex, construction height: 2,640 mm, drive type: Treibgas, LPG forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for use and fully functional Nsdew A Udispfx Aa Ijdc Technical condition: good Description: 360° camera Sideshift, 3rd valve, heating, full cabin, air conditioning,

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, rotor diameter: 400 mm, number of blades: 6, rotor length: 600 mm, rotor width: 400 mm, power: 22 kW (29.91 HP), filling opening width: 490 mm, filling opening length: 590 mm, warranty duration: 12 months, input voltage: 400 V, The compact inline granulators of the GST series are designed for use in injection molding and blow molding operations. They are suitable for recycling, for example, voluminous parts such as bottles, canisters, crates, sprues, and molded parts. Thanks to the low feed height, the machines can be easily loaded by hand or with a small conveyor belt. The low noise emissions and space requirements make the GST series the ideal solution for inline size reduction. All GST series machines feature a compact, soundproofed housing and a noise-insulated feed hopper. The feed hopper can be tilted open and closed via a gas strut. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths from 300 to 1000 mm. The smaller models feature an open F-rotor, while the larger machines come equipped with the heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. Thanks to the modular design, the granulator can be easily upgraded with additional options such as replaceable wear plates. As with all ZERMA granulators, rotor and stator knives can be adjusted outside the machine to minimize downtime during maintenance. A setting gauge is included in the delivery. The control cabinet is mounted externally on the noise protection enclosure, with internal wiring throughout the system. Technical specifications: Rotor diameter (mm): 400 Rotor width (mm): 600 Drive (kW): 22 Nedjvgncuopfx Aa Iodc Rotor knives (rows): 3 x 2 Stator knives (rows): 2 Screen perforation (mm): > 6 Cutting chamber size (mm x mm): 400 x 600 Weight (approx. kg): 2000

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Ndodpfx Aevitmdoa Ioc Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,495 h, load capacity: 2,500 kg, lifting height: 4,015 mm, free lift: 1,874 mm, fuel type: gas, mast type: duplex, construction height: 2,640 mm, drive type: Treibgas, LPG forklift truck ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Description: 360° camera Njdpfjw A Udcsx Aa Isdc Side shifter, 3rd valve, heater, full cabin, air conditioning,

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Ndjdpfxsu U Ixme Aa Isc Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled CTS temperature test chamber Technical performance data: Temperature working range temperature range -70°C / +180°C Nodpfxoichkvs Aa Isdc cooling speed 3,0 K/min Heating speed 3.5 K/min Temperature constancy, temporal ≤± 0.3 K. Dimensions: Test volume: 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6% -10%, 3/N, 50 Hz connected load 8,2 kW, 14,2 A Refrigerant: R404A / R23 Weight: 600 Kg Type: T-70/600 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.