Used Cut for sale (14,283)

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Cjdpfszikcfox Ahkegw Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Cgsdpfjzikb Uex Ahkow Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: used, machine/vehicle number: 32396, overall weight: 1,000 kg, total length: 1,820 mm, total width: 1,300 mm, total height: 1,250 mm, Year of construction: 2023, Machine Data Dimensions (W × H × D): 1300 × 1820 × 1250 mm Weight: approx. 1000 kg Drive & Performance Main drive: 15 kW, continuous operation Connection power: 30 kVA Cutting Disc Diameter of cutting disc: up to Ø 508 mm / 20" Cutting disc mounting: Ø 32/40 mm Speed: continuously adjustable 1000–2800 / 1000–2400 min⁻¹ Processing Data Max. sample size: Ø 190 mm Feed rate: 0.001–50 mm/s Positioning accuracy of the Z-axis: 0.1 mm Axes X-axis (cross-section): 420 mm, automatic Y-axis (cross-section): 280 mm, automatic Z-axis (parallel cut): 200 mm, automatic (optional) Cgodpfx Ajzilwqshkjw Table Data Table size with Z-axis: 550 × 500 mm Table size without Z-axis: 700 × 500 mm T-slot width: 12 mm

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Cjdpfx Ahjwhzg Usksgw Location: Nattheim

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 S PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS ), • Ability to perform operations on aluminum and PVC profiles, such as channel cutting, drilling, marking, cutting at different angles, etc. • 10 high-speed, air-cooled spindle motors specifically designed for aluminum. • Average axis speeds exceeding 120 m/min. • Precision 3-axis profile clamping station. • Profile feeding capacity of 7 pieces. • Profile processing length: maximum 6500 millimeters / minimum 600 millimeters. • Automatic profile length detection feature. • Windows-based, user-friendly interface with easy adjustment options. • Data transfer via USB, online remote monitoring system. • Remote connection support. • 23.8" touchscreen, high-performance display. • Servo-controlled cutting unit that allows for precise cutting between 30 and 150 degrees, with an accuracy of ±0.1 degrees. • Automatic transfer of cut profile waste to a collection cart via a conveyor system. STANDARD EQUIPMENT • Ø550 millimeter saw blade. • Automatic scrap chip conveyor discharge unit. Cgjdpfx Ajzd Rndehksw • Barcode printer. OPTIONAL EQUIPMENT • Compatibility with CAM programs. • Optional length. • Belt-type output conveyor. • Safety barrier (sensor).

Condition: reconditioned (used), functionality: fully functional, Effective cutting length: 4000 mm Blade diameter: 450 mm Pneumatic tilting of the cutting heads Codpfxezgh Ums Ahkogw Tilting angle: 90-45°

Condition: new, functionality: fully functional, Year of construction: 2026, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Thinker Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: Bodor Laser Head Brand: bodorgenius Cgedpfsg Eghdox Ahkow Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: used, Year of construction: 2010, laser power: 4,000 W, power: 4 kW (5.44 HP), Equipment: cooling unit, dust extraction, safety light barrier, TruLaser 3030 L20 4kW Laser on: 45.000 h Beam on: 25.000 hz Automatic pallet changer Machine Working range: X axis 3000 mm Cjdezh Ifnjpfx Ahkogw Y axis 1500 mm Z axis 115 mm Speeds: Parallel to axes 100 m/min Simultaneous (X and Y) 140 m/min TRUMPF CNC control system Siemens Sinumerik 840D SL: Laser TRUMPF TruFlow CO2 laser max. laser output: TruFlow 4000 (programmable in steps of 1%) 4000 W Beam mode: TruFlow 4000 TEM01 Maximum sheet thicknesses Mild steel (O2): TruFlow 4000 20 mm Stainless steel (N2): TruFlow 4000 15 mm Aluminum alloy (N2): TruFlow 4000 10 mm Consumption values: Laser gas CO2 1 l/h Laser gas N2 6 l/h ) Laser gas He 13 l/h Cutting gas: O2, N2 dependent on the application Laser cooling Closed cooling system Complete system Electrical consumption values (incl. chiller): With TruFlow 4000 9 - 61 kW Compressed air consumption: Average consumption with TruFlow 4000 31 Nm³/h

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 3,000 h, degree of automation: automatic, laser source manufacturer: TRUMPF, laser hours: 1,860 h, laser power: 3,000 W, TruLaser Tube 5000 fiber Laserpower: 3000W Year of manufacture: 04/2022 Machine on: 3100 h Laser on: 1860 h (!) Machine:  Feed station with self-centering clamping jaws  Tube support (raw material) with automatically retractable tube supports  Feed-through chuck with self-centering tensioning rollers  Adaptive clamping system for the feed-through chuck  Work area illumination  Tube support (finished part) with extendable guide rollers  Finished part deposit (contains one conveyor table and conveyor table extension)  High-precision drives TRUMPF laser  Excitation using pump diodes  Laser power control  Laser log function  Closed beam guidance via laser light cable (LLK) Cutting head Cgedpfxjzh H Axj Ahkew  Lens cutting head with 150 mm focal length  Magnetic coupling Control  TRUMPF control system based on Sinumerik 840D SL  Integrated technology data  Auto switch on and shutdown  Programmable cutting gas pressure  Remote support interface  Pivoting control panel with 19” touch screen  Condition Guide Functions  AdjustLine  ControlLine  FocusLine  NitroLine  PierceLine Data transmission  USB interface  RJ45 network interface  Central Link  Online Update Manager Accessories  Clamping jaw pair up to D 152 mm  Guide rollers, round/rectangular tubes  Ceramic part (one piece)  Cutting nozzles start-up set Safety  CE marking and EC Machinery Directive  Protective cabin with laser protective screens  Monitoring system for gas pressure, temperature and cooling water  One and two-beam safety light barriers Advanced standard configuration  Machine bed for 6.5 m raw material length  LoadMaster Tube for 6.5 m raw material length (including bundle space)  Part-removal station for 3 m finished part length (including scrap conveyor belt with container)  Compact dust extractor  Laser process cooler (water-air) Bevel cut technology package  Bevel cutting up to maximum 45°  Contains electrically movable feed-through chuck  Application-specific restrictions may arise depending on the respective material properties or the desired machining process Front LoadMaster Tube installation +1,5m unloading (max 4,5m)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 22,000 h, laser type: fiber laser, laser power: 6,000 W, L5-30 L5 system with 6kW Laserpower Options: GF Grids with mild steel slats CRS Scrap collection bins SiX System control and management FLR60L 6000 W high power-density fiber laser source with cooling unit ASF Fume extraction ACUT Compressed air cutting APC2 Adaptive process control FACE.L Salvagnini HMI for managing the laser system SIMFIBER Laser cutting process simulator IOT connected Activation of cloud connection Cgodpfx Aozh Hlmjhkjw Cutting limits: Mild steel (S185JR,S235JR, RAEX 250 C LASER) 20 mm Stainless steel (AISI 304, X5CrNi18-10 1.4301) 20 mm Aluminum (Al 99.5 EN AW 1050A) 20 mm Copper (Cu-ETP CW004A H040 EN1652) 8 mm Brass (CuZn37 CW508L H055 EN1652) 8 mm

Condition: used, machine/vehicle number: 007816, Position 1: Automated Warehouse BIESSE-SELCO SK 450 Cedpfx Aowuufqohkjgw Position 2: Beam panel saws with automatic warehouse BIESSE-SELCO SK 450

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Codpfx Ahsx A Thkokegw Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,560 h, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, wire diameter (max.): 0.3 mm, table width: 400 mm, overall weight: 2,890 kg, table length: 600 mm, table load: 400 kg, number of axes: 3, wire diameter (min.): 0.1 mm, This 3-axis AgieCharmilles Cut-20 P wire EDM machine was manufactured in 2016. It features a power of 11 kVA and operates at a voltage of 380 V. The machine weighs 2,890 kg and comes with complete documentation, manuals, and optional accessories. If you are looking to get high-quality wire EDM capabilities, consider the AgieCharmilles Cut-20 P machine we have for sale. Contact us for further details. Codpjzh Eyvofx Ahkjgw General • Type: Wire EDM Machine • Manufacturer: GF • Model: Cut 20 • Year of Manufacture: 2016 Technical Data • Table Size: 600 × 400 mm • Max. Workpiece Size: 820 × 680 × 250 mm • Max. Workpiece Weight: 400 kg • Automatic Wire Threading • Water Bath Cutting Electrical Data • Phase: 3 • Voltage: 380 V • Power: 11 kVA • Current: 17 A • Short-Circuit Current: 10 kA • Frequency: 50 Hz Additional Information • Machine Weight: 2,890 kg • Total Erosion Time: 4,560 h • Documentation: Complete documentation, manuals and accessories included • Cooling Unit: Not included (machine was operated with a central cooling system) • Condition: Fully functional • Repair History: Wire guide at the end of the machine (wire feed to the wire container) has been repaired due to damage. • Wire Container: Two minor chips

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,875 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 900 mm, workpiece length (max.): 1,450 mm, overall weight: 6,300 kg, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control system: Charmilles Millenium Travel ranges (X / Y / Z): 800 x 550 x 510 mm Travel ranges (U / V): 800 x 550 mm Max. conical angle: +/- 30° at a height of 510 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Includes option for a large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine will be cleaned, completely overhauled, and tested for all functions after order receipt. Cgodszhlvkopfx Ahksw Optional: - Commissioning of the machine at your location - On-site training - Cooling unit - Transportation - Clamping device set

Condition: good (used), Year of construction: 2018, MACHINE STRUCTURE 2500X12000mm HEXA GV500 NUMERICAL CONTROL HEIGHT CONTROL PLASMA BEVEL HEAD 6-TOOL REVOLVER ISO30 DRILLING MACHINE INCLUDED: HYPERTHERM 400A GENERATOR NEW Cjdpfx Ahoq Abwpskegw WARRANTY 6 MONTHS

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm Csdpfx Ahoxc Ibrokjgw C.N. E.C.S. series 900 GENERATOR: CEBORA PLASMA PROF166

Condition: used, machine/vehicle number: 14038, Rotor diameter: 260 mm Rotor width: 260 mm Rotor knives: 3 Stator knives: 2 Feed opening approx. 350×550 mm Cedeyr Tzdopfx Ahkjgw Drive motor: approx. 5 kW

Condition: new, Year of construction: 2006, type of input current: three-phase, total height: 800 mm, total width: 520 mm, total length: 800 mm, input voltage: 400 V, Professional Jackle Power Plasma 160A cutting machine for sale. German-made industrial equipment, suitable for a variety of metal cutting applications. Power supply: 400V, three-phase. Cutting current adjustable from 20A to 160A. The machine is in working condition. Cjdpsy U Izfefx Ahkogw

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Cgedpjhwrhfofx Ahkow Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button Cgodpfx Ahszdayqjkow MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Automatic knife return from any position Cedpfezdax Hsx Ahkogw Transparent cover on the rear table Laser cutting indicator Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: good (used), Ideal 4705 Paper Cutting Guillotine Csdpozdaxaefx Ahkegw This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: good (used), Ideal 4850-95 EP Paper Cutting Guillotine Machine in very good condition. Not used in production. Codpfozdatwjx Ahksgw Technical specifications: Working width: 475mm Stack height: 80mm Minimum scrap: 35mm Maximum distance from the knife to the saddle: 450mm 230V power supply Key features: The machine has an EP programmer with the function of moving to a given dimension and saving individual steps to the device’s memory. After calling the program, the machine moves to the desired and subsequent step from memory. Electromechanical knife, clamp, and saddle drive Automatic clamp synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable travel speed Transparent covers on the front and rear tables Electronically controlled two-handed cutting start Automatic knife return from any position Optical cutting indicator Additional equipment includes: tapping block, cutting stick, knife changing tools, spare knife, and documentation.

Condition: good (used), Adast Maxima MS 58S Guillotine The machine is fully operational, in excellent technical and visual condition. It has just been serviced. The set includes a spare knife, cutting stick, paper stacker, and tools. Technical specifications: Working width: 580mm Stack height: 85mm Power supply: 380V Weight: 450kg All key components are made of cast iron, including a flywheel and adjustable pressure force – this is a professional production guillotine in a compact design. Cedpfjzdatdjx Ahkjgw Electronic approach controller, cutting line, and safety guards.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Cgodpfx Aozc Rxhjhkew Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered