Used Cut for sale (14,401)

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Fgodpezixq Rofx Am Tsd Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Fodpfx Amoyly R Ej Togd Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Fgedpfxozixd Dj Am Ted Drive motor 250 kw

Condition: used, power: 7.5 kW (10.20 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Fgsdpfx Aszixdwom Tjd Rotor width: 900 mm With roll feed

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Fsdjzixdkspfx Am Tsgd Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Fodpfx Amozixdds Tsgd Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Fgjdjzixc Topfx Am Tod With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Fedpfxszixcto Am Tsgd Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Fgedpfx Amjzixcme Tod Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Year of construction: 1999, condition: used, The DSG 200 vertical sawmill is an ideal option for carpentry shops specializing in furniture and wood flooring, it is efficient and performs effectively. A used Wintersteiger mini wood sawmill is a very good investment, a big plus of this machine is that it doesn't take up as much space as standard devices of this type, and at the same time it is great for processing raw material. It is used for cutting individual pieces and fitting them to the appropriate size. Operation of this device is not particularly complicated and can be learned quickly. The biggest advantage of our sawmill is its rich equipment, which includes, first of all, a saw sprinkler system, controlled from the panel, which allows precise cutting of wet raw material. It has an independent control for adjusting the height of the upper rollers, which makes it possible to set the height of cut faster. Pneumatic pusher to assist the feed TECHNICAL DATA: -Total power 27.3 kW -Air Jet system motor 2.3 kW -Siemens control panel -Propulsion up to 2m/min -Stroke of traction frame 210 mm -Stroke count 400/min -Cutting height, continuously (steplessly) adjustable on our frame 45-250 mm -Maximum cutting height possible is 400 mm ! -Cutting width with side pressure 80-205 mm -Block length min. 250 mm -Lam thickness from 1.5 mm - depending on the type of wood and cutting height -Blades used : 0,9-1,1 mm -depending on cutting height -Length approx. 5000 mm Fgjdpfx Astvm Hdem Tjd -Width approx. 1300 mm -Height approx. 2600 mm -Weight : 5000 kg Pneumatic pusher to assist the feed We add to the machine: -complete large saw frame , -small saw frame, -frame pins, -clamps for stretching the frame, -saw attachments, -wet cutting saws, -dry cutting saws , -a set of top pull rollers, - 4 pcs of bottom pull rollers, -complete sliders, -frame yokes, -pocket cutting guides , -loading magazines, -DTR documentation -electrical diagram

Condition: repair required (used), functionality: limited functionality, Year of construction: 2007, operating hours: 31,489 h, control type: NC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser hours: 22,804 h, laser power: 4,000 W, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 3,000 mm, AMADA LC3015 X1 NT – Complete Automated Laser Cutting Cell -The AMADA LC3015 X1 NT is a fully automated CNC laser cutting cell designed for efficient, high-volume sheet metal production with minimal operator intervention. -The installation includes the AMADA LC3015 X1 NT laser machine, an AS LUL 300 X1 automated tower system, a 4 kW Mitsubishi ML40CFX CO₂ resonator, a Riedel industrial chiller, and a Donaldson Torit extraction and filtration system. -Manufactured in Japan in 2007, the machine offers a working area of 3,000 × 1,500 mm and delivers reliable, precision laser cutting performance. -The 4 kW laser is capable of cutting mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. Fsdpfx Amozi Uc No Tjgd -The automated tower system features eight storage cassettes with a load capacity of 3,000 kg each, enabling automatic material loading, unloading, and pallet exchange for continuous production. -A vacuum sheet handling system further improves productivity by reducing manual material handling. -The Riedel dual-circuit chiller provides efficient cooling for both the laser source and optical components, ensuring stable operation. -The Donaldson Torit filtration system effectively removes fumes and metal particles generated during the cutting process, maintaining a clean and safe working environment. -This complete AMADA/Mitsubishi solution combines automation, reliability, productivity, and integrated cooling and filtration systems, making it an excellent choice for demanding industrial manufacturing applications.

Condition: good (used), machine/vehicle number: 4551421, Paper cutting machine Polar 72 CE, 1 spare blade, machine number 4551421, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment. Fjdpevtytfofx Am Tjgd

Condition: good (used), Year of construction: 1995, machine/vehicle number: 6561785, Polar 78 E paper cutting machine, manufactured in 1995, machine number 6561785, programmable control, air table, light barriers. One number key on the keyboard is missing its keycap, but the key itself functions perfectly. In good condition, immediately available. Fgedpfjwaxhaox Am Tsd If you are interested, we would also be happy to provide information about other machines we have in stock. You are welcome to inspect the machine at our facility; please arrange an appointment in advance.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Polar 66 paper cutting machine, manufactured in 2000, machine number 70H1275, with programmable control and light barriers, in good condition, available immediately. If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment. Fodpfxszivdnj Am Togd

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, cutting width (max.): 1,150 mm, Equipment: safety light barrier, Polar 115 EM paper cutting machine, manufactured in 1982, with programmable control, air table, and light barriers. In good condition and available immediately. Fgsdezivbmspfx Am Tjd If you are interested, we would be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment.

Condition: used, Year of construction: 2011, Undercut cross-cut saw with continuously adjustable pneumatic cutting feed located at the front of the machine. Pneumatically controlled workpiece clamping device (also serves as a safety guard). Well-protected pneumatic units mounted within the compact machine body, with the maintenance unit mounted externally on the machine base frame. Extra-flat special circular saw motor for increased cutting height. Cut initiation via two-hand control with safety shield. The saw kerf is positioned on the right side with an inclined opening to allow cut-offs and waste pieces to fall freely. Safety Standards: CE compliant (in combination with roller tables), BG dust-tested, Type-tested, Electrical control cabinet integrated into the machine stand, Emergency stop device Processable Timber Dimensions Fgodpfxezki Uie Am Ted Saw Unit • Saw blade diameter: Ø 550 mm • Carbide saw blade, Z = 60 teeth, WZ20° • Saw blade bore: 80 mm Nominal Cross-Sections (without board curvature) • Max. 750 × 50 mm • Or 710 × 75 mm • Or 660 × 100 mm • Or 570 × 125 mm • Or 450 × 150 mm • Or 260 × 175 mm Permissible timber curvature in all directions: max. 3 mm per meter of length, or max. 10 mm over the entire length. • Minimum end length: approx. 10 mm • Wood species: softwood / hardwood / wood-based materials • Working height: approx. 850 mm Equipment and Technical Data • Powerful saw motor: 5.5 kW • Saw kerf on the right-hand side • Pneumatically lowered safety shield, pivoting away for easier access to the cutting area • Operating voltage: 400 V / 50 Hz Pneumatic and Extraction Requirements • Minimum air pressure: 6 bar • Extraction air velocity: approx. 30 m/s Extraction Connections • Lower housing outlet: 120 mm • Upper guard outlet: 120 mm • Extraction volume: approx. 2,600 m³/h • Weight: approx. 500 kg Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm Fgodpfx Ameyay H Ae Tsd 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle, 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä3726 Availability: May 2026

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, KAMPF (LONGITUDINAL SLITTER) Fgedpfxjzktycj Am Tod Desscription:: Year 1979, width 1600 mm, speed 600 m/min Machine is in very good condition and can be seen in production!

Condition: excellent (used), A robust cutting press from the renowned Italian company ATOM. This machine is designed for cutting elements made of leather, rubber, felt, technical foams, cardboard, and other soft materials using steel dies. It is equipped with height and pressure adjustment using a handwheel. The heavy cast iron construction ensures stability and a long service life for the machine. Technical data: Manufacturer: ATOM Model: G777E Serial number: 6218 Motor power supply: 220 / 260 / 380 / 450 V Fgodpjzgg Sqjfx Am Tsd Current connection: 220 V Adjustable working height Stable cast iron construction Made in Italy Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold in the exact condition as presented in the photographs.

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer Fsdpfx Amog I H Iks Togd The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: used, total length: 28,000 mm, For sale: MGM OMNICUT PGV3 CNC plasma and gas cutting machine. The machine is used, fully functional, and operational. It can be inspected and tested on-site. These CNC thermal cutting machines are manufactured by the Czech company MGM Tábor and are designed for plasma and gas cutting of metal sheets. The MGM OmniCut series is designed for professional, heavy-duty, and continuous operation, making it ideal for the production of large metal structures. Technical specifications: Manufacturer: MGM Tábor Model: OMNICUT PGV3 CNC control Plasma cutting Gas cutting Working table length: approx. 28,000 mm Working table width: approx. 3,000 mm Cutting thickness: Plasma: from 0.5 mm to 150 mm (depending on the plasma source) Gas cutting: up to 300 mm Heavy-duty portal construction Fedezd Td Ispfx Am Togd Designed for continuous operation in industry Advantages: Large working area Plasma and gas cutting capability in one machine Suitable for cutting thick and large-format metal sheets CNC control ensures precise and repeatable cutting Reliable industrial construction The machine is connected and in use Can be seen in operation in production Application: Ideal for the production of metal structures, shipbuilding, energy, heavy industry, agricultural machinery, bridges, tanks, and other large metal products. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2019, functionality: fully functional, laser power: 1,000 W, sheet thickness aluminum (max.): 3 mm, table length: 3,000 mm, table width: 1,500 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 10 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 3 mm, laser type: fiber laser, actuation type: electric, For sale: FIBER MTP1530AM3 / SF3015FL 1000W RAYCUS laser cutting machine. Fjdpfjzi Dnnjx Am Tegd The machine features a 1500 × 3000 mm working table, a Raycus 1000W laser source, CypCut control system, THK linear guides, a Tongfei/S&A cooling system, and a Leiming cutting head. According to the documentation, the cutting range is: stainless steel 1–5 mm, black/carbon steel 1–12 mm, and aluminum 1–3 mm. Power supply: 3-phase 380V, weight: approx. 2500 kg, dimensions: approx. 3700 × 2000 × 1500 mm. The machine was used in a production facility and is suitable for cutting sheet metal, steel components, and production parts, as well as for providing laser cutting services. Inspection is possible on-site. Price is negotiable.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, IMA BIMA CUT Working range (axis travel) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) Spindle • Spindle power: approx. 18 kW and 12 kW • Application: milling, drilling, board nesting, curvilinear edge banding Tool magazine • Automatic tool changer (ATC): up to 18 positions Material clamping system • Vacuum table with beams and suction cups—automatic repositioning 🛠️ Features and equipment (typical) • Drilling from 5 sides (top + sides X+/X−/Y+/Y−) • Saw aggregate for cutting and grooving Fedpfxsyzc Nke Am Togd • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Conveyor for waste and chips (belt)

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Fgedsx Eh Drspfx Am Ted Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 2726

Condition: used, Year of construction: 1995, operating hours: 10,000 h, functionality: unexamined, machine/vehicle number: 22377608, cutting width (max.): 1,500 mm, insertion height: 500 mm, table height: 800 mm, cutting length (max.): 1,500 mm, stack height: 1,500 mm, overall weight: 3,000 kg, type of input current: three-phase, front table length: 1,500 mm, total width: 1,850 mm, total height: 2,200 mm, working width: 1,500 mm, total length: 4,000 mm, table width: 1,500 mm, cutting height (max.): 10 mm, working height: 1,000 mm, table length: 1,500 mm, lifting height: 1,500 mm, load capacity: 2,000 kg, space requirement height: 2,500 mm, space requirement length: 4,000 mm, space requirement width: 3,000 mm, cutting speed: 600 mm/min, Rotary Simplex Cutter, consisting of two dragging rolls pressed by means of springs, pressure regulation is made by means of screw driven by handwheel. No.1 cutting group consisting of one fixed blade and rotating blade, the cut interference is made by means of adjustment and clamping screws. Circular knife groups for cutting and longitudinal trimming. Drive group with forced lubrification. Drives placed on the outside base. Adjustable speed motors. Transversal and longitudinal size of the paper sheet. from 500mm. to 1500mm. Max speed 50/60 m/min. No.1 unwinding group with support and breaking groups suited to unwind at the same time. No.1 main drive with D.C motor of suited power complete of pulley and belt for motion transition. Fgedozd Exqepfx Am Ted