Used Cut for sale (14,295)

Condition: good (used), Year of construction: 2012, CNC gantry plasma cutting machine Rjdpfou U Hm Ajx Ag Nop Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel torches (propane) Beuting oscillating conveyor table Donaldson DFPRO12 filtration system for outdoor installation 25226ä

Condition: good (used), Year of construction: 2008, CNC Gantry Plasma Cutting Machine Manufacturer: Messer Model: Multitherm 4000 CNC Control: Global Control Plus Year of Manufacture: 2008 Retrofit: 2019 Extraction Table: 2,000 x 3,000 mm 1 Oxy-fuel Torch ALFA 1 Plasma Torch Power Source: Kjellberg HiFocus 280i Filter System: Z-Line 9 ZDC In-house technicians for installation, commissioning, and training! Rodpfx Aoiff Dasg Nsp All spare parts in stock

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Track length: 11 m Burning table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatic rotating plasma bevel unit Bevel System 2015/350 Rodpfxsw Rpvbs Ag Njp Filter unit Downflow 3DFP9-SP Power: 9 kW Laser diode 25226ä

Condition: used, Year of construction: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Model: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting window: 1,540 x 600 mm Redpfxoyf Egxs Ag Nop Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum output: 1 – 8 kW Connected load: 5.5 kW 380 Volt, 3 phase, 50 Hz Compressed air: 6 bar, 200 l/min (when using pneumatic tool holders) 9 bar, 400 l/min Equipped with 2 independently operating multi-tool heads, each comprising: Tool module for all tool inserts Pen module for marking 2 punching tools with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm One needle Perimeter conveyor belt (feeds material into the working zones) Vacuum table divided into 300 x 300 mm quadrants High-performance vacuum turbine with frequency control up to 1 – 8 kW High-intensity projector Servo drive for X, Y, and Z axes Safety device with light barrier monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Weight: 1,630 kg

Condition: used, Year of construction: 2012, CNC Laser Cutting System Manufacturer: Microstep Model: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC Control: iMSNC Windows Approx. laser operating hours: 4,000–5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Maximum sheet thickness - Steel: 15 mm Maximum sheet thickness - Stainless steel: 8 mm Maximum sheet thickness - Aluminium: 8 mm Operating temperature: Rsdjx Eh Drjpfx Ag Njp +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left & right): Outlet left Ø 250 mm Laser source: IPG Ytterbium Laser System YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter unit: TEKA 4H 5.5 kW Overall dimensions: approx. 10,400 mm x 3,610 mm

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Rodpfxexnmbno Ag Nep "MasterCut" plasma rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filtration system No. 25226

Condition: used, Year of construction: 2006, CNC portal plasma cutting machine Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Working area: 3 x 12 m Track gauge: 4,000 mm Track length: 15 m Extraction table Rodpfsykpd Esx Ag Nsp 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filtration unit ä25226

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 HP 4,000 bar with high-pressure pump 1 plasma cutting head with Hypertherm XPR300 power source High voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive measuring system Collision protection system Rjdpfxsykqwto Ag Nop Water treatment system TCI HIDROSYSTEM 2.0 Sludge removal system Lantek Expert 2D software with automatic nesting feature

Condition: good (used), Year of construction: 2011, CNC Portal Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC Control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical specifications in detail: 1x oxy-fuel torch (fully automatic) 1x Kjellberg Finsterwalde plasma marking unit (fully automatic) MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the gantry Laser pointer with automatic offset transfer iMSNC control parameter database / Windows® Programming system “AsperWin-Basic” for direct programming at the machine control Macro library module “AsperWin Select” NC simulator module “AsperWin NC-Sim” Module “Plasma marking” (for scribing/centering) via plasma source THC module / Automatic height control via arc voltage USB 2.0 interface for external storage MicroStep® remote diagnostics module “iFDS Win” Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply cables Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylen FIT+ 1 set capacitive height control IHT / for oxy-fuel Rsdpfxsudn Rzj Ag Nep 1 set electric ignition unit RHÖNA-Acetylen Double-sided cable protection (collision protection) of the gantry bridge via emergency stop Kjellberg® FineMarker plasma marking unit Fully automatic support for FineMarker Kjellberg® FineMarker plasma marking system CNC interface for FineMarker / integration with CNC control Module for automatic control of the marking unit

Condition: used, Year of construction: 2006, CNC Gantry Oxy-Fuel Cutting Machine Manufacturer: Bach Model: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Redpfxsw El Uds Ag Nsp Working table: 1.5 x 6 m 2 oxy-fuel torches 18226ä

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of Manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm Redpfoxu U Ddjx Ag Nsp 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning/cutting table with sectional extraction, 6,000 x 3,000 mm Plasma rotator 'MasterCut' with fully automatic support ACTG automatic calibration unit for the beveling head Kemper extraction system 8000 (year: 10/2015) Asper Basic 2D programming software + Asper BevelCut bevel cutting programming Other technical data: MicroStep machine control system with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical probing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transfer USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover in the cutting table Reinforced version of the cutting table Connection of the fine plasma source to CNC control Automatic gas console control Electric and mechanical torch height sensing LED signal column on the gantry bridge (2 colors) Tactile safety shut-off device for guide rails Light curtain safety system (collision protection) on the gantry bridge via emergency stop Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 25226ä

Condition: used, Year of construction: 2005, CNC Gantry Plasma Cutting Machine Manufacturer: Messer Model: Omnimat L8000 Year of manufacture: 2005 Redpeykruaofx Ag Nep CNC Control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x Oxy-fuel bevel cutting unit DAF/L for weld seam preparation (bevels) 1 x Skew Rotator with Kjellberg FineFocus 800 power source 3 x Oxy-fuel torches ALFA 1 x Marking unit FineMarker Without table, filter or guide rail ä25226

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Model: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Rodpfx Aeyhd Rbsg Nsp Automatic gas console Donaldson DFPRO 6 Cyclopeel filtration unit Cutting software: Omniwin Standard Availability: immediate ä25226

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2023 CNC control Working area: 1,500 x 3,000 mm 1 x plasma torch with Hypertherm Powermax 45 power source Air plasma system Redpfx Asydibqsg Nsp Cutting thickness: 12 mm piercing For thin sheet metal Without filter Available: March 2026

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Laser on: 55,176 h Rodpfx Agsxfin Se Nep

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers Rsdpfx Agsyk E Sfs Nsp - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Redpsw Nac Aefx Ag Nsp Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: good (used), Year of construction: 2016, Year of manufacture: 2016 (according to manufacturer's specification) Counter reading (sheet feeder): approx. 3.3 million. - 5 components - Barcode control - Ionization Special equipment: 9 laser sensors for processing Scodix material Technical data (information without guarantee) - Max. feed format: 762 x 530 mm - Min. trimmed finished format: 100 x 105 mm - Feeder stack capacity: 800 mm Rodpfjynf Tkex Ag Nop - Max. delivery stack capacity: 254 mm

Condition: excellent (used), functionality: fully functional, Usable cutting length 4000 mm Blade diameter 550 mm Electronic head tilting Internal/external tilting from 22°30′ to 135° Labeling machine Rjdsxvhiiopfx Ag Nep

Condition: excellent (used), functionality: fully functional, Usable cutting length: 4000 mm Rjdpox Ifimsfx Ag Nep Blade diameter: 500 mm Electronic tilting of the heads Internal/external tilting from 22°30′ to 135° Feeler probe Chip conveyor belt

Condition: excellent (used), functionality: fully functional, Blade diameter: 350 mm Maximum cutting capacity: 4000 mm Pneumatic tilting of the heads Number of speeds: 2 Maximum blade speed: 2820 rpm Motor power: 4.8 kW Rsdpfx Aoxzfa Njg Nop Machine dimensions: 5600 x 1800 x 2000 mm Machine weight: 1400 kg

Year of construction: 2011, condition: like new (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Pneumatic tilting of heads External tilt 45° Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm): 4,000 Rsdpfxex A Ar Se Ag Nop Minimum standard cut at 2 heads at 90° (mm): 310 Blade diameter (mm): 450

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Maximum non-feedable length 385 mm Disc size 350 mm Rjdpfex Hw Sqsx Ag Nsp Blade rotation speed 1700 / 3400 rpm - 2 speeds

Condition: excellent (used), functionality: fully functional, Voltage 380 v Absorption 3.5 kW Pressure 6-8 bar Blade motors 2800 g7min. 0.75 kW Redpfsv S I Arox Ag Nsp Blade diameter: 250+175 mm Max profile height 40 mm Minimum profile width 100 mm Minimum profile length 350 mm Weight 150 kg Dimensions: 1300x550x1250 (h) mm

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Usable cutting length 5000 mm Blade diameter 550 mm Electronic head tilting Rjdpoyg Epvofx Ag Nsp Internal/external inclination from 22°30′ to 135 ° Measuring probe