Used Cutting Device for sale (23,946)

Condition: used, Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: G300L321302, cutting length (max.): 3,200 mm, type of input current: three-phase, input current: 32 A, input voltage: 208 V, table width: 1,800 mm, table length: 3,200 mm, input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Zünd L-3200 machine, type: paper cutting machine, year of manufacture: 2022. Product: Cutter G3 Lhjdpfjymdb Dex Afaoc Type: L-3200 Year of manufacture: 2022 Serial number: G300L321302 Country of manufacture: Switzerland Voltage: 208/400 V AC, 3-phase Current: 32 A Frequency: 50–60 Hz If you have any questions or require further information, please send us a message or contact us by phone. Full specification available upon request. The unit is practically as new (1000 operating hours).

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools Lhsdpfx Afjyl Unxsajc – Hard pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening Ledpfx Ajyl Um Usfashc – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: Lhedpoyl Umnefx Afaec – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: Lhsdpfxjyl Ulwj Afajc – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: used, Year of construction: 2005, CNC Gantry Plasma Cutting Machine Manufacturer: Messer Lhodpfx Afoykruaeasc Model: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld seam preparation (bevels) 1 x Skew Rotator with Kjellberg FineFocus 800 power source 3 x ALFA oxy-fuel torches 1 x FineMarker marking unit Without table, filter, or track ä18226

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Ljdpfxju Tg Spo Afashc Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, total length: 1,059 mm, overall weight: 190 kg, total width: 915 mm, type of input current: three-phase, total height: 535 mm, input voltage: 400 V, DGUV certified until: 03/2027, NEW Loading Oven Schaubackofen NEW Salva kwik-co KX-5 The latest generation of modern oven series with COOL-Touch and LOW-E Easy control ECO Energy Saving System Rounded baking chamber For 5 trays, 600x400 mm DGUV V3 tested exclusively by us Connection: 400V, 16A-CEE plug Dimensions: 915 x 1059 x 535 mm (W x D x H) Brand new unit, SAB tested with warranty Lodpfx Afox Dypdoaohc Options: Water filter Baking trays Service package Maintenance contract Delivery service Training & commissioning

Condition: ready for operation (used), Laservall 3,5 KW KUBO 100 EVO KE100E0109 Bouwjaar: 2009 Lhjdpfjymg R Iex Afasc Mitsubishi Control Microscoop voor het repareren/lassen van kleine onderdelen

Condition: ready for operation (used), controller manufacturer: Touch-L, laser power: 10,000 W, travel distance X-axis: 6,280 mm, travel distance Y-axis: 2,070 mm, total length: 17,200 mm, total width: 6,300 mm, total height: 3,360 mm, empty load weight: 21,500 kg, Gemonteerde opties: - automatische nozzlewisselaar - schroottransportband Workpiece dimensions: 6160 x 2035 mm Type of Laser: LVD Hight travel Z-axis: 130 mm Travel speed: 140 m/min Max cuttingthickness in steel: 25 mm Max cuttingthickness in Inox: 30 mm Lhodpfx Ajxqh Sgjfaec Motor Power: 75 kW Shuttle table: yes

Condition: excellent (used), Year of construction: 1983, wire diameter range: 3,0 - 7,0 mm cutting length: max. 4.000 mm Lsdpfx Asfkx Trefaohc wire feeding speed: 40 - 80 mtr./min *complete with Wire pay-off WEBER DH 1000*

Condition: used, Year of construction: 2006, CNC Gantry Plasma Cutting Machine Lodpfx Asykpd Eofaohc Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2006 CNC Control: Global Control Working area: 3 x 12 m Gantry width: 4,000 mm Rail length: 15 m Downdraft table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filtration system ä18226

Year of construction: 1993, condition: good (used), BFM overhead cutter for PE-PS-PA pelletizing Lsdpfx Aeipyh Ijfashc

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -Tap cutting set: 47-piece / internal and external threads -Size: M3 to M20 -Individual components: see photos -Dimensions: 500/420/H85 mm Ledpfoyk Upyjx Afaohc -Weight: 9.1 kg

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Lsdpfxsfkmr Se Afaehc Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Lhsdpfxjyly R Eo Afaec Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 50,000 h, control type: CNC control, actuation type: electric, controller manufacturer: Fanuc, laser type: CO₂ laser, laser hours: 50,000 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, table length: 5,040 mm, table width: 1,550 mm, working length: 2,520 mm, working width: 1,500 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, workpiece weight (max.): 330 kg, type of cooling: water, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, Amada CO2 laser. Purchased in 2006. Operated intensively until 2017. In 2017, we acquired a fiber laser, and since then this unit has been used only occasionally for specialised tasks. The laser is fully operational but requires an inspection of certain components. X-axis is virtually unlimited after repositioning; Y-axis – 1500 mm. The laser is housed in a heated hall and has not been exposed to weather conditions. If purchased, we can assist with arranging loading onto transport. Lodpfx Asyly Hmofashc

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Machine has very low hours Ledpfxov Iaqye Afashc

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, Machine Details Manufacturer: Trumpf Type / Model: TruLaser 5030 fiber Machine Type: Laser Cutting System Cabin Protection: Safety Enclosure Color: grey / blue Spindle Arrangement: – Year of Manufacture: 2014 Laser Operating Hours (h): (not specified) Operating Hours (h): (not specified) Number of Owners: 1 Next Safety Inspection (UVV): (not specified) Control / Electrical System / Weights / Dimensions Control System: Siemens 840 D SL Operating Voltage: 400 V / 50 Hz Power Consumption (kVA): (not specified) Max. Punching Force (kN): – Hydraulic Tank (L): (not specified) Machine Weight: 12,000 kg Max. Workpiece Weight: 900 kg Max. Sheet Size: 3,050 × 1,550 mm Installation Dimensions (L×W×H): 9,500 × 6,300 × 2,500 mm Max. Sheet Thickness (mm): 10 – 25 Lodpfx Afsykxq Ieajhc Tool Magazine (Stations): – Technical Specifications X-Axis Travel: 3,000 mm Y-Axis Travel: 1,500 mm Z-Axis Travel: 116 mm Rapid Traverse: 280 m/min Laser Output Power: 5,000 W Value-Adding Features Solid-State Laser TruDisk 5001 Laser Chiller Unit Cooling Unit for the System Universal Cutting Head Multi-chamber Extraction System Light Barriers Electric Roller Roof Hydraulically Adjustable Pallet Changer

Condition: excellent (used), Filling device for packaging chips mobile suspension crane Lhodpfxeylknbo Afajc maximum extension height: 3.30 meters load capacity approx. 10 kg 4 lockable swivel castors

Condition: excellent (used), Universal measuring device Cordipar 1) Type 4675 Gr.2 Manufacturer: Korda Measuring range: 140 - 280 mm 2) Type 4675 Gr.3 Measuring range: 270 - 450 mm 3) Type 4675 Gr.3 Measuring range: 430 - 740 mm 4) Type 4675 Gr.5 Ledpfx Aeylkh Ijfashc Measuring range: 710 - 1020 mm

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives Ljdpjylh Iljfx Afajhc with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm Lhodpfxsylhzle Afaec with electrical cabinet AVAILABLE AND READY TO WORK

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Secabo FC 100 Cutting Table + DRAW CUT PRO – Excellent Condition For sale: Secabo FC 100 cutting table, purchased in February 2025 and very lightly used. The unit features a vacuum table and vacuum pump to securely hold materials during cutting. Lhjdpfeykz A Hsx Afaec Comes with all original accessories and licensed DRAW CUT PRO software. Can be tested in our workshop prior to purchase. An invoice with VAT will be issued upon sale.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 520 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 480 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, spindle speed (max.): 24,000 rpm, spindle motor power: 10,500 W, tool weight: 2,800 g, number of axes: 3, This 3s Hyundai Wia I-cut 380MD vertical machining centre was manufactured in 2012. It features a maximum spindle speed of 24,000 rpm and a spindle power of 10.5 kW, providing efficient machining capabilities. The working area includes a 520 mm X-axis and a 480 mm Z-axis, making it suitable for various applications. Consider the opportunity to buy this Hyundai Wia I-cut 380MD vertical machining centre. Contact us for further details. • Table size: 2 × 650 × 400 mm • Spindle taper: BBT30 • Rapid traverse (X/Y/Z): 56 m/min • Tool magazine: 20 tools (BBT30) • Maximum tool length: 200 mm • Maximum tool diameter: 65 mm Lhodpfxjyk Em No Afajc • Through-spindle coolant: 20 bar • Prepared for connection of rotary axes on both tables • Condition: Machine is connected and fully operational; inspection and testing possible at any time Additional equipment • Chip conveyor included