Used Cylindrical Grinder for sale (2,716)

Condition: ready for operation (used), Bratstvo Lignum sharpening and grinding machine for sawmill blades. The machine is complete and in working technical condition. It can be additionally equipped with rollers for holding band saw blades. Kdsdpfx Ajxx Uxieadew

Condition: ready for operation (used), Kellenberger cylindrical grinding machine spindle, used, in good condition! Kdodpsxwbd Ajfx Aadjw

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 12000 kg Kdsdpfxjxvt Ane Aadjw Movement X-Axis Movement 450 mm Z-Axis Movement 850 mm This STUDER S242 was manufactured in 2008, a cylindrical grinding machine known for its robustness and precision. It features a swing diameter of 180 mm, max workpiece weight of 20 kg, and grinding spindle speeds up to 50 m/s. The machine includes shaft automation, grinding wheels, and is still powered up and fully functional. Annual maintenance by Studer ensures reliability. For more information about this machine, please reach out to us. Application Types Grinding

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Kdjdpfow T Sc Nsx Aadow Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: excellent (used), Nice mixer grinder for large butchers or catering butcher, sausage/burger factory use. Kdedpjxxd E Sjfx Aadow

Condition: used, Year of construction: 1994, Control system, manuf. ECS, type Rosa System, 3 axes (Y/Z/U), touch sensing, electronic grinding wheel balancing unit, dressing device, magnetic clamping plate, 1,000 x 500 mm, workbench, 2,000 x 750 mm, contents: accessories, setup tools, clamping devices, lifting tools Kjdpfxsxug Hqo Aadodw

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2501001, type of input current: AC, Drill Bit Grinding Machine 0313 – Simple Drill Bit Sharpening for Everyone Achieve perfect results quickly and easily, even without professional training! It’s so easy! Sharpening your drill bit is completed in three steps: 1. Clamp the drill bit in the fixture 2. Grind the drill bit 3. Point/sharpen the drill bit tip Ready in less than a minute! Before clamping the drill bit, use the rotary knob on the grinding machine to set the required drill diameter. With the appropriate collet, the drill bit is positioned against the stop in the left holder of the machine and clamped in place. Sharpening the cutting edges and pointing the tip is straightforward: power on the machine, insert the fixture with the drill into the right holder, and turn gently from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to grind the second cutting edge. Pointing the tip works the same way, using the top holder. That’s it – simply switch off the machine and unclamp the drill bit. A brilliant design combines an eccentric mechanism with a specially engineered grinding wheel, so there’s no need to worry about edge profile or clearance angle. Additionally, both cutting edges are produced with exactly the same setting, guaranteeing perfect edge symmetry. The tip angle can also be freely selected between 90° and 140° before grinding. 21 highly precise collets for diameters from 3 to 13 mm in 0.5 mm increments ensure truly concentric clamping. The service life of the grinding wheel exceeds 5,000 applications. Besides the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drills. Changing the wheel takes just a few moments and two safety switches prevent unintended start-up when the machine is open. The compact design and practical carrying handle make this drill bit grinding machine ideal for mobile use. All system tools, such as collets, fixtures or hex wrenches, are stored on the machine itself—so everything you need is always at hand. The drill bit grinding machines are energy efficient and even fit on any desk. Drill bit sharpening without prior knowledge – clean, fast and reliable! Included: - 11 collets for whole millimeter sizes (3 – 13 mm) - 10 collets for half-millimeter sizes (3.5 – 12.5 mm) - Standard CBN grinding wheel - Machine dimensions: 290 x 200 x 180 mm Kedpfx Ajxnzrnsadodw - Shipping weight: 12 kg

Condition: repair required (used), Year of construction: 1992, 1992 Imeas Sheet Polishing Line Main Control Siemens S5 Simatic, electrical overhaul in 2017 Various Grades of Stainless Steel Pneumatic Sheet Loader (6m x 1m; 200kg capacity) RCS-2T/160 Satinatrice Twin Station Belt Polishing Unit (reconditioned 2018) SMS-2T/160 Twin Brushing Unit (2 new brushes) Plast/f/catrice PL/160 Film Application Unit Pneumatic Sheet Stacker and Run out Roller Table (6m x 1m; 200kg capacity) Take off Roller Conveyor Existing Protection Fencing around the Line Qty. of misc. Spares including chrome pressure roll for brushing unit, replacement polishing belts & brushes etc. Option of Large Dust Extraction fan set Min. Input Width [mm] 600 Max. Input Width [mm] 1500 Min. Output Width [mm] 600 Max. Output Width [mm] 1500 Min. Thick. [mm] 0.4 Max. Thick. [mm] 3 Min. Length [mm] 1000 manual / 1250 auto Max. Length [mm] 6000 manual / 3000 Kdodpfx Aaswbubfedow Auto Coating foil Max line speed [m/min] 15 Burr (depending on Thickness) [%] EN 9445

Year of construction: 2002, condition: ready for operation (used), General Data Measurements depth 3340 mm Measurements width 1960 Measurements height 2050 mm Machine weight 5000 kg Control Unit Brand FANUC Model Series 21i-T This JUNKER EJ 29 CNC was manufactured in 2002. A robust cylindrical grinding machine, it features a grinding wheel diameter of 400 mm, motor power of 4.5 kW, and spindle speeds up to 1000 rpm. It can handle grinding lengths up to 600 mm and diameters up to 280 mm. Control is managed via a GE Fanuc Series 21i-T unit. Consider the opportunity to buy this JUNKER EJ 29 CNC cylindrical grinding machine. Contact us for more information. Application Types Kodexulfxopfx Aadjdw Grinding

Condition: excellent (used), Year of construction: 2005, table length 160 mm table width 130 mm grinding wheel diameter 250 mm total power requirement 1 kW weight of the machine ca. 1 t Kodpfxoxvdtds Aadjdw

Condition: excellent (used), Year of construction: 2017, operating hours: 595 h, WWB200 SuperGrinder. Perfect machine for kebab factories, sausage and burger producers etc. Has run for 595 hours only. Kdedpfxjwhagtj Aadow

Condition: good (used), functionality: fully functional, rotary table diameter: 650 mm, table diameter: 650 mm, Glauchau Horizontal Spindle Ring Grinder With 650mm dia. Magnetic Chuck Kdsdpfx Aaoxxyvmjdjw

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Ksdpfexdc Ensx Aadsdw Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding Kdedpfx Aajt N Ivcodow • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: like new (used), functionality: fully functional, I am selling this grinder, as new, for internal grinding, including accessories. A video of the machine can be sent via WhatsApp. 4. Specifications 4-1 Machine Specifications Item Unit OGM-250UDX Kodpfjxwm Uaox Aadodw Capacity Swing diameter over table mm 220 Distance between centers mm 500 Max. workpiece diameter mm 200 Max. workpiece weight kg 60 (centered workpiece) Grinding wheel External diameter x width x bore mm ⌀305 x 25 x ⌀127 Rotational speed (via belt change) min-1 2357 / 2087 Max. peripheral speed m/min 2000 Grinding spindle X-axis travel mm 203 Swivel angle degree +30° Minimum travel increment mm ⌀0.001 Handwheel feed value mm/rev ⌀2 per revolution Table Z-axis travel mm 640 Swivel angle degree 4 to 9 Handwheel feed value mm/rev 7.5 per revolution Automatic feed rate mm/min 50 to 4000 Workhead Spindle type Spindle for combination — fixed/rotary Spindle taper Morse No. 3 Spindle through hole diameter mm ⌀17.5 Spindle speed min-1 10–500 Swivel angle degree 30° to 90° Tailstock Quill stroke mm 20 Quill taper Morse No. 3 Motors Grinding wheel spindle motor kW 1.5 (2.2) Workpiece spindle kW 0.4 Table feed kW 0.4 Lubrication pump kW 0.01 Coolant pump kW 0.06 Magnetic separator (optional)kW 0.025 Power Supply Power consumption kVA 10 Voltage V 200 Frequency Hz 50 Tank Capacity Coolant tank liters 80 Lubrication tank liters 5 Workpiece center height from floor mm 1040 Required Footprint Width mm 2880 Depth x Height mm 1884 x 1600 Net weight kg 1900

Condition: excellent (used), Year of construction: 2004, table length 175 mm table width 110 mm grinding wheel diameter 500 mm Kjdpfexvdr Tjx Aadjdw total power requirement 1 kW weight of the machine ca. 1,5 t

Condition: new, Knife grinder Motor: 2.2 kW / 2800 rpm, 220V, Capacity: 400-800 kg/h for fruit, 40-200 kg/h for dry material Screens: 4 pieces, according to request. Purpose of the machine: Pre-chopping and grinding. Suitable for grinding the following products: - Grains: wheat, corn, peas, pepper, caraway. - Pressed seeds: sunflower cake, soybean meal, pumpkin seed cake, linseed cake, poppy seed cake, etc. - Raw fruits and vegetables: pepper, plum, apricot, apple, quince, pear. - Dried fruits and vegetables: pepper, onion, garlic, raspberry, blackberry, apple, sour cherry, etc. Main components of the machine: - Frame - Safety switch - Motor 380V or 220V - Housing - Hopper - Sieve - Knives - Dosing regulator Kdjdsxvxbcjpfx Aadjw Available in stainless steel version.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: Kdjdpfswrnf Esx Aadew >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: new, The HFS 3063 F Advance is a remarkable addition to the Conventional Surface Grinders category, designed for optimal performance within the Grinding Machines product group. This KNUTH machine exemplifies robust engineering with a cast-iron frame that offers superior rigidity and exceptional machining quality. It features precision guideways lubricated via a central system, ensuring reliability during operation. With an extensive standard equipment package, including a magnetic clamping plate with a built-in demagnetizing function and a Siemens PLC control system with a user-friendly touchscreen, the HFS 3063 F Advance enhances operational efficiency. Moreover, its electronically controlled hand-wheel allows for accurate spindle movement. Customers seeking a solution that bridges conventional grinding and CNC automation will find that this machine meets their needs seamlessly. Whether you're considering installation or the right accessories, speaking with our team can provide clarity on how this model can elevate your operations. Request a quote for the HFS 3063 F Advance today to benefit from advanced surface grinding technology. Kdjdpfx Aswub Tusadew

Condition: new, Year of construction: 2025, Stone Grinding Mill Machine Purpose: Fine grinding (powder fineness, between 25-100 microns). Kedpfoxvw Tkjx Aadodw During stone grinding, particles become rounded and break less, resulting in a soft, fine flour texture. Materials Suitable for Grinding: - Grains: wheat, corn, rice, rye, chickpeas, millet, sorghum, buckwheat, ancient wheats. - Dried plants, fruits, onion, garlic, paprika, carrot, vegetables, caraway, pepper. Dried: raspberry, strawberry, sour cherry, blackberry. - Pressed seeds (dry residue after oil pressing): sunflower, soybean, oil pumpkin, hemp seed, flax, rosehip seed, grape seed. - Dried herbs, leaves, grasses: nettle, lavender. Main Components of the Machine: - Frame - Safety switch - Motor 380V - Stone housing - Hopper - Feeder - Particle size adjuster 0.05—3mm - Feed regulator - Stone lifting aids The machine frame is made of painted steel. Other components are stainless steel. Motor: 7.5 kW Capacity: 80-150 kg/h

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Kdedpfsm E T Anjx Aadow Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: new, The FSM 480 is a high-precision Conventional Surface Grinder from KNUTH, designed specifically for users who engage in straightforward grinding tasks at cost-effective rates. Perfect for repair and training workshops, this machine features a robust cross table construction that ensures excellent quality. Its solid, vibration-absorbing base effectively minimizes operational disturbances, while the spindle, mounted in pre-loaded angular deep-groove ball bearings, ensures low-vibration operation and high durability. The machine comes with a magnetic clamping plate and a dust suction device as standard equipment, enhancing usability. With an adjustable hand wheel scale that allows for precise vertical and transverse adjustments, you can achieve remarkable grinding parallelism of just 0.005 mm over 300 mm. For those inquiries regarding installation or accessories, you can explore further. To enhance your machining capabilities with a reliable Conventional Surface Grinder, buy now and experience the benefits of the FSM 480 from KNUTH. Kedpfx Ajuyicysadsdw

Condition: excellent (used), Year of construction: 1995, Tool grinding machine Michael Deckel S5 in very good condition Technical data: >> year of construction 03/1995 >> grinding wheel diameter max.100mm >> spindle speed 5600 1/min >> power consumption 1,5KW >> weight 450KG Kdodpepr U Etefx Aadsw Accessories: >> Swiveling dividing head SK40 >> div. mountings SK40 To the machine : Offered is a tool grinding machine of the brand Michael Deckel S5. The machine is suitable for grinding high precision parts. The Deckel S5 is in a very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Kdodoxu E Nqjpfx Aadow Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Kdsdpfx Aaeqd N S Dodsw Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.