Used Damatomacchine Lathe for sale (5,362)

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centre distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Cedpfx Aoyg Rfisbpogn Centre height over bed: 140 mm Centre height over cross slide: 80 mm Spindle bore: 36 mm Feed: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Mains connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX size A quick-change toolpost with 3 interchangeable holders - revolving centre - emergency stop - folding chuck guard - coolant system - very low operating hours Space requirements L x W x H: 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 Cedjxn Svdopfx Abpogn X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Cgodpfxex Hqh Sj Abpjn

Condition: good (used), Year of construction: 1977, Margin scheme taxation according to §25a of the German VAT Act. You will receive a proper invoice, but VAT is not itemized. Internal item no.: 26015 You are welcome to inspect the machine under power in our heated warehouse of over 500m². Csdpfjyg Htcjx Abpegn Lathe Leinen DLZ 140 Year of manufacture: 1977 Centre height: 160 mm Centre distance: 500 mm Spindle speed: 15 - 3100 rpm (stepless) Tailstock: MT3 Total power: 2.2 kW + Chuck guard (with switch) + Röhm 3-jaw chuck 125 mm + Multifix "A" quick-change toolpost + Collet device + Operating manual Dimensions (LxWxH): 150 x 80 x 120 cm Weight: approx. 800 kg The machine comes from an educational facility and is in well-maintained condition.

Condition: excellent (used), Year of construction: 1987, turning diameter 500 mm turning length 1500 mm swing diameter over bed slide 285 mm Cedpfsyg N Rwsx Abpegn total power requirement 11 kW

Condition: good (used), Subject to differential taxation according to §25a of the VAT Act. You will receive a proper invoice, however, VAT will not be shown separately. Internal item no.: 26010 You are welcome to inspect the machine under power in our heated warehouse of over 500 m². Leadscrew and feedshaft lathe Voest Alpine DA180 + Coolant system + Röhm 200 four-jaw chuck + Chuck guard (with switch) + Multifix "B" Motor: 380 Volt / 5.5 kW Cgedpfsyg Dtgsx Abpon Speed: 44 - 2,000 rpm Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Dimensions (LxWxH): 220 x 120 x 160 cm Weight: approx. 1,200 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Leadscrew and feed shaft lathe Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Cjdpfx Aoyg Dl Aobpsgn Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition.

Condition: excellent (used), Year of construction: 2021, INDEX C200, Mfd. 2021 Control: Siemens Solution Line 3 Turrets 2 Spindles Cgjdpfx Abox Av Dbepen D=90 mm IRCO VDI 30 With tooling prictured Short magazine bar Feed Machine located in Europe

Condition: good (used), Year of construction: 2018, functionality: fully functional, The following are for sale here: 1 x MultiSwiss 16-6 from year 2018 2 x MultiSwiss 14-6 from year 2017 2 x MultiSwiss 14-6 from year 2015 Cgjdpfx Abjx Na Slepjn

Condition: used, Year of construction: 1996, turning diameter 320 mm turning length 1100 mm control Fanuc Cgedoyg Rbdjpfx Abpen

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Cgodpfxeh Axrys Abpsn Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Cedpfjyglk Hsx Abpegn Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories and Equipment: - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Note to all private buyers: The price of the machine is well into the five-digit range.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control: FAGOR 8055 FL Swing diameter over bed: 475 mm Distance between centers: 1000 mm Spindle speed: 100–4500 rpm Spindle bore: 62 mm Three-jaw chuck SCHUNK Rota-S-Plus 250/62 4-position quick-change toolholder, controlled Dimensions (LxWxH): 3000 x 1850 x 2000 mm (height) Cjdpfx Aboyhguijpegn Weight: approx. 3000 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, CNC control Max. bar diameter: 26 mm Max. spindle speed: 50 - 7,000 rpm 3 cross slides Turret with 6 stations Cgsdpfeyhd Aqox Abpjn Bar feeder IEMCA BOSS 432/32 N Max. bar length: 3,200 mm

Condition: new, Year of construction: 2022, The technique is intended for concentration, calming the mind, and decision-making. Dimensions: Height 2.8 m, Diameter 1.6 m Cgedpfxjyhahij Abpsn Made in Lithuania, "MITRONAS Engineering"

Condition: used, Year of construction: 1996, turning length 1.000 mm Cjdpfx Abeygm Ugepsgn turning diameter over bed 400 mm turning diameter over slide 240 mm spindle bore 52 mm spindle tunring speed 30 - 1.600 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Fanuc control system, gantry loader, one turret with Y-axis, two spindles, loader is designed for forged or sawn parts. Cgsdpfsyg H U Tsx Abpsn

Condition: good (used), Year of construction: 1999, functionality: fully functional, Fanuc control, two turrets, sub-spindle, chip conveyor, bar feeder, immediately available. Csdpfx Aoyg Hr Eobpegn

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, Fanuc control, Cjdpfxsyg Hn Hj Abpsgn 6-position turret, Chip conveyor, FMB loading magazine,

Condition: good (used), Year of construction: 2010, operating hours: 64,321 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck. Cedpex Hwfqefx Abpsgn

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 123, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter sub-spindle: 26 mm - Max. drilling diameter sub-spindle: 10 mm - Max. tapping diameter sub-spindle: M10 - Max. drilling diameter tool spindle: 8 mm (front/rear tool holder) - Max. tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter at tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min Csdpfox Hxz Hsx Abpogn - Controllable axes: 6 The machine is equipped with a bar loader from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be collected, by firm appointment, between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22006A, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, overall weight: 5,000 kg, total width: 1,500 mm, total length: 9,000 mm, total height: 2,200 mm, controller manufacturer: FANUC, controller model: SERIES 32 i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Rated current: 64 A - Frequency: 50 Hz - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter for deep holes: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 Csdpfxsx Hwn Ss Abpegn - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, model: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between March 4th and March 12th, 2026, on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 505, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, total height: 2,400 mm, total length: 8,000 mm, total width: 1,500 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI HS 207 CNC Automatic Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 41 A - Rated power: 14.3 kVA Cjdpsx Hwlwjfx Abpsgn - Bar clamping diameter: from 3 to 20 mm - Max. machining length: 210 mm (synchronously driven guide bushing) - Static guide bushing: 250 mm - Rotating guide bushing: 80 mm - Without guide bushing: 45 mm - Max. drilling diameter: 10 mm - Max. tapping diameter: M10 - Diameter of deep holes: 8 mm - Max. counter spindle clamping diameter: 20 mm - Max. counter spindle drilling diameter: 8 mm - Max. counter spindle tapping diameter: M6 - Max. tool spindle drilling diameter: 6 mm (front/rear tool holder, B-axis tool spindle) - Max. tool spindle tapping diameter: M5 (front/rear tool holder, B-axis tool spindle) - Max. tool spindle slot milling cutter diameter: 30 mm - Tool spindle speed: 200–8000 rpm - Total number of tools (standard specification): 35 - Tool dimensions: 12 x 12 x 100 mm - Rapid traverse: 32 m/min - Rapid traverse in X1 and Y1: 24 m/min, in Y2: 15 m/min - Controllable axes: 7 The machine is equipped with a bar feeder from manufacturer FMB, type: TURBO 3-36, as well as a chip conveyor and coolant system. Note: This item must be picked up definitively between 04 and 12 March 2026 on a date to be mutually agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), functionality: fully functional, machine/vehicle number: 14736259, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 1,500 mm, overall weight: 2,000 kg, HYUNDAI HIT-8 S CNC lathe - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 24 A - Connection: 25.5 kVA Note: The item must be collected between 04 and 12 March 2026 on a specific date to be agreed upon in advance. FCA D-75181 Pforzheim – loaded onto truck Csdpfx Abex Hwhfopsgn

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe Cgodpfx Abox Hwguspsn - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck