Used Deburring for sale (423)

Year of construction: 2007, condition: ready for operation (used), A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available. Tsdpfx Aistul N Djrjd

Condition: like new (used), Year of construction: 2023, Deburring brush with 2 speeds, 1500/3000 rpm Operating manual Todpfx Ajzmp U Usired

Condition: used, Year of construction: 1995, Brush deburring machine with 2 different speeds, depending on material 1000 or 1500 rpm. Tedpfez Hx Hkox Aired

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Euro Fintec 410 is a deburring machine which has a 1 inch belt. The belt assembly can be easily adjusted to accommodate complex deburring operations. It comes complete with a dust collection bag to ensure safe operation It is in excellent condition and comes complete with a number of deburring belts. Tedpfx Ajzmafqjirsd

Condition: good (used), functionality: fully functional, automatic pipe end deburring in continuous process --- Tjdpszyx Udjfx Airod Pipe length max. 600 mm Max. pipe diameter 30 mm Brush length approx. 450 mm Brush revolutions 2000 rpm 2 brush drive motors, 5.5 kW each

Year of construction: 2011, condition: excellent (used), Manual chamfering machine for round tubes and bars 4-spindle deburring and chamfering machine For internal and external deburring/chamfering Spindle speeds: 70/140 rpm Materials: steel, stainless steel, aluminium, non-ferrous metals Diameter: Ø 2 – 75 mm Min. workpiece length: from 100 mm Deburring time: 3–4 sec. / end face The machine is equipped with deburring tools from the manufacturer Kopal. Tool holder is MK3 The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition Tsdpfx Aijzwpwqerjd

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Tsdpfx Aijzwt Rbored

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. Tedpfozzlqnjx Airsd All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. Tsdpfx Aezq Ax Ujirjd If you have any questions or require additional information, please send a message or contact us by phone.

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 Tjdpfx Aij Adnv Asrjd . Series : B20 .

Year of construction: 2014, condition: ready for operation (used), A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible. Tsdpfxjyxq Uio Aired

Condition: used, Year of construction: 2003, Rausch Gratomat MS150/3-800 Multi-Spindle Deburring Machine 20-800mm workpiece diameter 150mm maximum vertcal working stroke 150mm maximum gear face width 1-8 modul range compatibility 4 number of grinding spindles Tedpfx Aoz Stwveired 26,000rpm grinding spindle speed

Year of construction: 2018, condition: ready for operation (used), An automatic gKteso post-processing and deburring center is available. Technology: 6D, axes: 5+1, working dimensions X/Y/Z: 500mm/500mm/300mm, max. travel speed: 1m/s, repeatability: 0.05mm, path accuracy: 0.1mm, max. flatness: 0.02mm, chucks: 2-jaw/3-jaw/4-jaw chucks, machine dimensions X/Y/Z: approx. 2400mm/1800mm/2900mm, operating hours: approx. 12541h. Including pneumatic chucks, safety light curtain, exchange table and 6D technology. Documentation available. An on-site inspection is possible. Todjzlt N Topfx Airod

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils Todezy Uvkepfx Airjd - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Condition: used, functionality: fully functional, ECM deburring machine Tjdpszd Dwrefx Airod VMB brand, formerly Kenametal Currently not installed, but I will handle its relocation to the warehouse 2 units available

Year of construction: 1979, condition: not inspected (used), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from the company Hurth. Technical data: Manufacturer: Hurth Type: ZEA1 Year of manufacture: 1979 Adjustability of the machining unit: 150mm tool outer diameter: 190-205mm workpiece outer diameter: 20-120mm Tjdpfxshg Nuio Airod workpiece length: 150mm Toothing width: 50mm Module for chamfering: 1-4mm chamfer width: 0,7mm Weight: 2t

Year of construction: 2026, condition: ready for operation (used), A brand new Spontan brush deburring machine, which was used only as a demonstration machine, for tubes and profiles is available. Product length range: 100mm-2000mm, Product diameter range: 8mm-90mm, Brush diameter: 300mm, Wall thickness range: 0.5mm-6mm, Max. workpiece weight: 10kg/m, Min. product length: 2×diameter, Brush wire diameter range: 0.2mm-0.5mm, Brush length: 450mm, Discharge height: 1300mm, Machine dimensions X/Y/Z: approx. 3500mm/1750mm/1700mm. Documentation available. An on-site inspection is possible. Tsdpfxszkvkwe Aired

Year of construction: 2014, condition: ready for operation (used), A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible. Tedpjwfg Huefx Airjd

Condition: good (used), functionality: fully functional, Timesavers 42 Series-1350-WRB The 42 series features 2 stations: a belt sanding station, which is ideal for removing burrs and raised edges, and a second station with rotary brushes for even edge rounding. Tedpjznm R Nofx Airod The vacuum conveyor belt also makes processing small parts, even those the size of a business card, easy. Working width: 1350 mm Table opening: 0.8-100 mm Conveyor belt: frequency-controlled and steplessly adjustable in speed Rotary brushes: frequency-controlled and steplessly adjustable in height and speed Note!! The vacuum pump shown in the pictures is missing; it will be mounted on top of the machine.

Condition: used, Year of construction: 2020, max. wheel diameter 1.000 mm gear width 500 mm Todpfxo Ad Rlgo Aired max. module 2 min. module 50 Control Klaassen table load of rotary table max. 3.000 kp dia. of 3 jaw chuck 365 mm dimensions of the machine ca. 2,85x1,5x2 m

Year of construction: 1990, condition: used, Deburring machine. Tjdpfx Aszzpw Ssirod

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, total width: 1,500 mm, overall weight: 5,200 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 5 A, Equipment: documentation/manual, The ERNST Neptun EBB 1500 is a deburring machine for sheet metal processing, used to clean and round the edges of parts cut, punched, or burned with a laser. This machine enables the alternating processing of various materials, such as steel, aluminum, galvanized sheets, or materials coated with protective film, thanks to its flexible deburring roller and brush set. Main features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made of different materials without the need for constant replacement of abrasive elements. • Functionality: Uses a flexible roller for deburring and a set of brushes (steel or lamellar) for dulling or rounding edges. • Precision: Allows for achieving identical and uniform radii on the edges. • Ideal solution for: Companies that process various materials where edge finishing is required after cutting. Important information: The machine has different options. It can hold parts pneumatically or magnetically. Modules: Tsdpfsz Spmtox Airsd E – Module with a deburring roller B – Stainless steel brush module – for dulling edges and removing oxides up to 6 mm B – Scotch/Vlies brush module – for rounding edges 0.1 – 0.4 mm and applying texture to the material surface. With this type of machine, material processing is done in a wet environment, so there is no need to retool or clean the machine, and it can work with various types of materials, such as aluminum, stainless steel, structural steel, etc., in continuous operation. The entire process takes place in a closed water system with the addition of a special emulsion, which ensures that neither the machine components nor the processed parts rust. From time to time, water needs to be replenished as it evaporates in the parts drying system and during filtration in a special filter within the machine.

Condition: used, Colour: Green Empty weight: 3.500 kg Price: On request - Transport weight [kg]: 3500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Tjdjz Ngv Hopfx Airjd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SN064871, Sound insulation, RFID chips, LiServ 4.0, energy measurement package, ME 5000, barcode scanner. Tsdpfxjzzmgkj Airsd

Condition: good (used), Year of construction: 1990, Offer 26188 Tjdpfez Hk Imjx Aired Technical data: - Brush diameter, each, up to approx. 120 mm - Brush width, each, up to approx. 90 mm - Shaft diameter, each, 20 mm - Manual height adjustment of the top brush via handwheel - Drive per motor: 400 V / 2.5 kW - Space requirement: approx. W 650 x H 1150 x D 450 mm - Weight: approx. 80 kg