Used Deckel Dc 30 for sale (690)

Condition: excellent (used), travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, controller model: Heidenhain TNC 426/430M, total height: 2,300 mm, total length: 2,200 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,292 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, Equipment: documentation/manual, This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is still in very tidy condition; both the axes and the spindle run very smoothly. Equipped with a Heidenhain electronic handwheel. Gsdpsxlquaofx Aabsbu Dimensions: 2200x2200x2300 mm (LxWxH) Weight: approx. 3000 kg

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. table surface area 2.600 x 600 mm Gbedpfx Aetumqvsabou rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 20, control type: CNC control, number of axes: 3, For sale is our used but maintained and good condition Deckel Maho DMC635 machining center due to machine park upgrade. The machine is available for inspection and can be put into production immediately. The milling machine has mainly been used in single-shift, small batch production. Upon request, it can be sold with 20 tool holders and a vise. Year of manufacture: 2008 Operating hours: 17,641 h Control: Sinumerik 840D Table clamping area: 790 x 560 mm X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Spindle speed: 0 - 10,000 rpm Number of controlled axes: 3 Through-spindle cooling: no Spindle taper: SK40 Tool changer: yes Tool magazine capacity: 20 Rapid traverse: 30 m/min Gbodpfx Aexl Ubdsabju Dimensions (L×W×H): 3300x2905x2705 mm

Condition: used, Year of construction: 1994, x-travel 600 mm y-travel 500 mm Gbedpfxevvcc Ue Aabou z-travel 450 mm control Dialog 11 31,5-5.000 U/min 7,5 kW SK 40 Ø 500 mm 30 Stück 6 m / min. m/min 4,3 t dimensions 3,5 x 2,4 x 2,2 m Universal Milling- and Boring Machine - full covered - coolant system - NC- rotary table - tool changer

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426m Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 650 mm Z-Axis Movement 550 mm Additional Equipment Vise Angle table Various mounts Royal presetting device This 3-axis DECKEL MAHO DMU 80E was manufactured in 1999 and features a Heidenhain 426m control, travel distances of X 800mm, Y 650mm, and Z 550mm. It includes a 24-fold changer and an internal hard drive. Installation dimensions are approximately 2x3m. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 80E machine we have for sale. Contact us for more information about this machine. Gbsdpfx Asxgwb Nsabsu Application Types Milling

Condition: reconditioned (used), Year of construction: 2001, Universal milling & drilling machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 - 4,500 rpm infinitely variable With the following accessories: Manual swivel rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X , Y , Z axis Splash guard cabin Machine light Gsdeuw Sd Ijpfx Aabsbu 4 pcs. Height-adjustable machine shoes Coolant device Operating instructions

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2203-8615, mount diameter: 40 mm, table length: 700 mm, table width: 425 mm, total height: 1,700 mm, total length: 2,000 mm, total width: 1,500 mm, overall weight: 2,000 kg, DECKEL FP4MK (Active Digital) Tool Milling Machine TECHNICAL DATA & EQUIPMENT: Machine number: 2203-8615 With active digital point-to-point control (active control in X, Y, and Z axes) Godexd Dymjpfx Aabjbu Tool holder: SK 40 Table dimensions: approx. 700 x 425 mm Note: The machine vice shown on the table is not included in the scope of delivery REFERENCE NUMBER 25 DIMENSIONS & WEIGHT: 2000 x 1500 x 1700 mm 2000 kg PICKUP NOTES: Collection of the items can be arranged for a date to be agreed between November 17 and 20, 2025 FCA D-54634 Bitburg, loaded onto truck

Condition: used, Year of construction: 2002, x-travel 1100 mm y-travel 710 mm z-travel 710 mm Control Heidenhain iTNC 530 Number of working hours ca. 79.360 h Gedexgicfjpfx Aabobu spindle hours ca. 34.555 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), DECKEL FP2A CNC milling machine with Contour 3 control and vice. x-path 300 mm y-path 300 mm z-path 400 mm Gbodsrfaq Repfx Aabeu Spindle holder ISO 40 Gmqcb8 Spindle speeds 40 - 4000 rpm Table size 620 x 390 mm Feed rates infinitely variable 4 - 4000 mm/min Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Base area 1.9 x 2.0 mm Switch cabinet 1.90 x 0.75 x 1.05 m Space requirement approx. 2.9 x 2.7 x 2.0 m

Condition: used, Year of construction: 2005, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Heidenhain iTNC 530 c-axis 360 b-axis -5/+110 ° turning speeds 20- 10000 U/min power capacity - milling spindle 13 kW tool taper SK 40 no. of workpieces in the magazine 16 Stück rapid traverse 24 m/min table surface area 630 x 500 mm table load 200 kg weight of the machine ca. 4,0 t dimensions 2,3x 3,2 x 2,75 m 3 + 2 axis Milling Center - Turn-/swiveling table full programmable - cableless 3D touch probe Heidenhain TS 641 Gsdew Eyg Ispfx Aabobu - electr. hand wheel - new spindel in 2015

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Gbsdpfx Aoxdayijabeu Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Gbjdpfx Aaouqmvkobsu Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Gbjdpfx Aaoxghtvsbsu Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: used, Year of construction: 2004, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm Control 840D pl ShopMill Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 Nm tool taper HSK-A63 swivellable B: +/- 100 ° table surface area 4.200 x 900 mm max. table load 4.200 kg T-slots 9x 18H7 x 100 number of toolpositions 130 ( 120 +10 ) pos. tool taper HSK-A63 max. tool diameter 50 mm max. tool weight 6,0 kg max. tool length 200 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min feed speeds max. 20.000 mm/min total power requirement 92 kVA Gbsdountmqopfx Aabeu weight of the machine ca. 17,0 t dimensions of the machine ca. 11,0 x 5,5 x 3,0 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 360 linear - 5 Axis ( NC-Swivel-Milling-Head & LEHMANN - EA 430.2A ) - moveable tailstock - separated WorkingTable - internal Coolant-System - 120-pos. Tool-Magazine incl. cleaning-unit - 10 additional pos. for oversized tools - Machine equipped with increased accuracy

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Godjuuh Suepfx Aabebu Dimensions: 38*68 cm Height: 25 cm

Condition: used, Year of construction: 2009, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Siemens ergoline table surface area 2x 790 x 560 mm number of pallets 2 rapid traverse 30 m/min turning speed range 8000 U/min power capacity - milling spindle 13 kW no. of tools in the magazine 30 Stück tool taper SK 40 | | weight 5,2 t dimensions 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming Gbedpfx Aaetxctvebou - Roto Clean - signal lamp - spindle oil cooler

Condition: good (used), Year of construction: 2007, Ref. -No.: 10467 Manufacturer: DECKEL MAHO Type: DMU 70 Year of construction: 2007 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Gbsdpfx Aajxc Tr Nsbju Country of origin: Japan X-Travel: 700 mm Y-Travel: 620 mm Z-Travel: 620 mm B-Axis: -10 - 180 ° C-Axis: 360 ° Table surface: 500 x 630 mm Tool Piece Magazine With: 30 Pcs./pcs. Spindle Speed: 10.000 RPM Further information: 5-axis simultaneous machining incl. accessories Machine can be inspected under power by arrangement.

Condition: reconditioned (used), Year of construction: 1987, Universal toolroom milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 - 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drilling spindle sleeve Stepless feed via potentiometer 1 pcs. Machine vice 1 pc. Counterholder with counterbearing 1 pc. Milling arbor long 0 22 mm Various tool holders S 22 x 2 Bellows Z axis Gedpfxspxm Ane Aabebu Machine light Automatic central lubrication pump Chip collecting plate Coolant device Operating instructions THE MACHINE IS IN A VERY GOOD CONDITION !!!

Condition: used, For sale: the tool milling machine shown in the photos, manufactured by the German company Deckel, model FP3A. The machine offers manual, semi-automatic, and automatic operation modes. Controlled via G-codes. Control type: CNC 2102 Deckel. Godjxluu Repfx Aabsbu

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model 840D Control Main Drive Gedpfx Aaexfwyisbsbu Number of axis 4 Additional Equipment NC dividing head EA 410 TS 640 measuring probe Coolant/air blast switch Flushing gun for chip removal Electronic handwheel – Operating mode 4 Control Unit Brand SIEMENS Model 840D Control Main Drive Number of axis 4 Additional Equipment NC dividing head EA 410 TS 640 measuring probe Coolant/air blast switch Flushing gun for chip removal Electronic handwheel – Operating mode 4 This 4-axis DECKEL DMC 835 V was manufactured in 2007. It features an NC dividing head EA 410, manual tailstock, and a TS 640 measuring probe. Additional highlights include a coolant/air blast switch, flushing gun for chip removal, and an electronic handwheel. This machine is complete with accessories. If you are looking to get high-quality milling capabilities consider the DECKEL DMC 835 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Technical data Gbedpfsxgh R Usx Aabju Working area: 250 × 700 mm Copy table size: 430 × 600 mm Travel / working range longitudinal (X): approx. 322 mm Travel / working range transverse (Y): approx. 200 mm Spindle drive / power: approx. 1.5 / 1.7 kW Spindle speed: approx. 80 – 20,000 rpm Copy ratio (enlargement / reduction): 1:1 to 1:4 Overall dimensions (approx.): 2,000 × 2,000 × 2,000 mm Weight: approx. 1,650 kg

Condition: used, Year of construction: 2001, x-travel 650 mm y-travel 500 mm z-travel 500 mm control Siemens 840 D table surface area 800 x 500 mm rapid traverse 60 m/min table load 1,5 t turning speed range 0 - 18.000 U/min Gsdpfxsxf I Nus Aabobu max. torque on the spindle 130 Nm power capacity - milling spindle 15 kW no. of tools in the magazine 30 Stück tool taper HSK 63 A | weight of the machine ca. 11 t dimensions 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - Lasersystem for tool measure - 3,5" floppy disk - 4th axis - new spindle in 2016

Condition: used, Year of construction: 2008, x-travel 780 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper SK 40 (150° (-120/+30)° pallet changer: Number of pallet-stations 4+1 pos. size of pallet 630 x 500 mm max. load 400 kg T-slots 5x 14 x 100 rotary table 360 ° tool magazin: number of toolpositions 120 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg feeds: rapid traverse ( X / Y / Z ) 50 m/min feed speeds 20 - 15.000 mm/min measuring system resolution capability 0,001 mm total power requirement 61 kVA weight of the machine ca. 12,0 t dimensions of the machine ca. 6,0 x 6,0 x 2,8 m CNC Machiningcenter Universal DECKEL MAHO - DMC 60 T RS 3 - 5 axes - 120 pos. tool changer - Number of pallet-stations 4+1 pos. - Internal coolant supply - HEIDENHAIN measuring probe - BLUM tool measurement - Spindle replacement Feb. 2024 Gbodpou Elqqsfx Aabju

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Gbedpfjw Agxrsx Aabou Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: used, Year of construction: 2002, x-travel 650 mm y-travel 500 mm z-travel 500 mm control Siemens 840 D table surface area 800 x 500 mm rapid traverse 60 m/min table load 1,5 t turning speed range 0 - 18.000 U/min max. torque on the spindle 130 Nm power capacity - milling spindle 15 kW no. of tools in the magazine 30 Stück Gbjdexf I Nzepfx Aabeu tool taper HSK 63 A | internal coolant system feed 40 bar weight of the machine ca. 10,5 t dimensions 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - 3,5" floppy disk - 4th axis - new spindle in 2019