Used Deckel Feinbohrkopf for sale (683)

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW • Tool holder: SK 40 Tool magazine Rodpfxoz Indhs Airsch • Tool positions: 30 • Max. tool length: 300 mm

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 2820-0484, total height: 1,930 mm, total length: 2,060 mm, total width: 2,430 mm, Equipment: documentation/manual, Product Milling Machine Brand Deckel Type FP 3A Measurements WxDxH approx. 206x243x193 cm Specifications Serial number 2820-0484, Grundig control unit. The machine has been disconnected from the power supply and all fluids have been removed. Redpfx Aij Aguy Esrjch Details Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: used, Year of construction: 2012, Manufacturer: DECKEL MAHO, Type: DMC 1035 V, Year of manufacture: 2012, Serial No. 15425051954, Operating hours: 46,416, Spindle hours: 18,325, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline touchscreen, Tool magazine for 40 tools, SK 40, Travel range X/Y/Z 1,035 x 560 x 510 mm, 3 machine vices, Manufacturer: Roemheld, Type: HILMA NC 125, Jaw width 125 mm each, Chip conveyor, Chip cart Redpfoz Tlhijx Airjch +++ ATTENTION! This machine is part of an online auction! +++

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMU90P duoBLOCK Operating hours: 52,700 h Operating hours: 22,700 h Immediately Available! Control: HDH iTNC640 Travel: X-900 mm, Y-1050 mm, Z-850 mm clamping surface: 900 x 700 mm max. table load: 1.800 kg Spindle mount: SK50 Spindle speed: 12,000 rpm tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar Tool measurement: BLUM Laser probe: Heidenhain Redpfe Aa Ayuex Airech electric handwheel: Yes

Condition: repair required (used), Year of construction: 1999, functionality: not functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 310, table width: 500 mm, table length: 700 mm, table load: 200 kg, rotational speed (max.): 5,000 rpm, overall weight: 3,000 kg, spindle speed (max.): 5,000 rpm, spindle nose: SK40, input voltage: 400 V, DECKEL MAHO DMU 50 M CNC | Heidenhain TNC 310 | Year 1999 | Damaged For sale: Deckel Maho DMU 50 M CNC machining center from 1999, equipped with Heidenhain TNC 310 control. The machine is sold as damaged – it displays error 120202 during startup, therefore it is offered as a unit for repair or for parts. The error indicates a lack of connection to the PLC controller. Technical data Rcsdpfs Adzt Iex Aireh * Manufacturer: Deckel Maho * Model: DMU 50 M * Year of manufacture: 1999 * Control: Heidenhain TNC 310 * Machine type: Universal CNC milling center (3+2 axes) Working parameters * X-axis travel: 500 mm * Y-axis travel: 400 mm * Z-axis travel: 400 mm * Table surface: 700 × 500 mm * Maximum table load: approx. 200 kg * Spindle speed range: 0-5000 rpm * Spindle taper: SK40 * Maximum working feed rate: 5000 mm/min * Rapid traverse: 5 m/min ## Equipment * Heidenhain TNC 310 control * Manual tilting/rotary table: * B-axis: from -10° to +95° * C-axis: 360° * Cooling system * Safety guards ## Technical condition The machine is sold as non-functional. Error message 120202 appears during startup. The error has been discussed with a service technician, who indicates damage to the middle LT module - the module itself reports error 1. Repairing the module, depending on the extent of the damage, costs between 5,000 and 8,000 PLN. The machine is sold in the condition shown in the photos. Ideal for a service company, someone involved in CNC machine repair, or as a source of spare parts. It was in continuous use until October 2024. ## Additional information * Year of manufacture: 1999 * Weight: approximately 3000 kg * Power supply: 400 V * Loading possible. * Viewing by prior arrangement. Price: negotiable I will issue a VAT invoice. The stated price is the net price. Please contact me by phone and arrange to view the machine. Machine loading is not possible - sold without loading. We do not have a forklift with the appropriate lifting capacity.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: TNC430, overall weight: 6,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Rapid traverse rate X/Y/Z: 50 m/min Tool holder: SK 40 Table: max. load capacity approx. 200 kg Rjdpo Agm Tbsfx Airsch

Condition: good (used), Year of construction: 2004, Equipment: documentation/manual, Deckel FP1 Universal Milling Machine – Heidenhain TNC 123 Technical Data: Manufacturer: Deckel Type: FP1 Machine: Universal Milling Machine Control System: Heidenhain TNC 123 Travel in X-axis: 300 mm Travel in Y-axis: 160 mm Travel in Z-axis: 340 mm Quill Travel: 80 mm Spindle Speed: 40–2,000 rpm Spindle Taper: ISO 40 Feed Rate Range (3 axes): 5–500 mm/min, continuously adjustable Rapid Traverse Rate (3 axes): 1,200 mm/min Redpfx Ae Agghajirsch

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 2,000 kg, overall weight: 24,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 60, Completely overhauled by DMG in 2011. Tool holder: SK50 with tool storage for 60 tools. IKZ (internal coolant supply). Max. spindle speed: 8,000 rpm. Rjdpe Agaznofx Airoch 30 kW spindle with swiveling milling head (B-axis). Infrared measuring probe. NC rotary table with pallet changer.

Condition: excellent (used), Year of construction: 2015, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (min.): 14,000 rpm, operating hours of spindle: 14,500 h, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Machining center Deckel Maho DMC 1150V Technical data CNC control: Siemens Ergoline Travel in X-axis mm: 1150 Travel in Y-axis mm: 700 Travel in Z-axis mm: 550 Feed rates m/min: 42 Max. spindle speed rpm: 14000 Coolant supply through the spindle bar: 20 Tool holder: SK 40 Magazine: 30 Chip conveyor Tank capacity liters: 600 Measuring probe Infrared tool measurement TT140 Coolant gun Direct measuring system XYZ Operating hours: 26,600 h Spindle operating time: 11,000 h Rodpfx Aiez Ayg Tjroch Base machine: Dimensions/Weight L/W/H mm: 3600 x 2300 x 2700 Weight kg: 5750

Condition: ready for operation (used), Year of construction: 2007, Key Technical Specifications Rjdpfxsz Tc E Sj Airoch • Type: 3-axis vertical machining center / traveling-column milling machine • Travels (X / Y / Z): 2,200 mm / 560 mm / 720 mm (approx. 220 cm X-axis) • Table Size (L x W): 2,600 x 600 mm • Maximum Table Load: 2,200 kg • Spindle Speed: Up to 18,000 RPM (common configuration for this model variant) • Tool Taper: SK 40 • CNC Control Unit: Heidenhain iTNC 530 • Machine Weight: Approximately 12 tons

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control Rodpfx Aiez Riy Rorsch 120-position tool changer HSK 63 tool interface Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Work area enclosure 3D probe, Heidenhain Blum laser Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Robot interface Oil and emulsion mist separator

Condition: excellent (used), Year of construction: 2000, operating hours: 24,695 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 1,000 mm Y-axis travel: approx. 800 mm Z-axis travel: approx. 500 mm Table length: approx. 1,250 mm Table width: approx. 800 mm Table load capacity: max. approx. 1,200 kg Spindle speed: up to approx. 15,000 rpm Tool holder: SK 40 Rcsdo Afxn Sjpfx Airoh MACHINE DETAILS Control system: Heidenhain Spindle operating time: 24,695 h Machine operating hours: 64,814 h Control system operating hours: 72,542 h EQUIPMENT Automatic tool changer Renishaw probing system Coolant system Chip conveyor

Condition: good (used), functionality: fully functional, FOR SALE: DECKEL FP1 Milling Machine Technical specifications: • Model: FP1 (Serial number: 54212/08) • Machining travels: X = 300 mm | Y = 150 mm | Z = 340 mm • Spindle: SK 40 taper • Speeds: Mechanical adjustment via a circular selector on the front panel • Power supply: 400 V / Three-phase Rcjdpfxo Af Au Ne Airsh • Weight: Approximately 750 kg Included equipment: • VISOMAT 3-axis digital display on an articulated arm • Circular rotary dividing table mounted on the table • Articulated work lamp • Protective bellows for the slides, in excellent condition • Chip collection tray integrated into the machine frame Very clean used machine, slides in good condition, and ready for use.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,475 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMC 1035 was manufactured in 2008. It features a travel of 1035 mm on the X-axis, 560 mm on the Y-axis, and 510 mm on the Z-axis. The machine is equipped with a Siemens 840D control unit and a spindle speed of 14,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 vertical machining centre we have for sale. Contact us for further details. - Tool Changer Positions: 30 slots- Operating Hours: 27,475 h - Spindle Hours: 8,040 h Rcjdpfx As Agviqeirsh Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2002, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in 2018! TECHNICAL DETAILS X-axis travel: 880 mm Y-axis travel: 630 mm Z-axis travel: 630 mm B-axis swivel range: -15° to +90° Rodpfx Ao Afw Ahjirsch Spindle speed: 12,000 rpm Tool positions: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours: 50,033 h Spindle operating hours: approx. 17,000 h Spindle replacement: 11/14/2018 EQUIPMENT Controlled B-axis in the milling head 32-position tool changer Coolant system

Condition: good (used), Year of construction: 2021, functionality: fully functional, Internal article number: 26082 Universal milling machine Deckel FP4M Overhauled by FPS in 2021 + Hydraulic machine vice, Röhm 135 + Machine lamp / protective cover + Operating manual Dimensions (L x W x H): 140 x 210 x 200 cm Weight: approx. 1500 kg Rcedpfx Aiszxgy Seroh The machine comes from a training workshop and is in very good condition.

Condition: used, Year of construction: 1999, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, total height: 2,400 mm, total width: 2,600 mm, total length: 2,600 mm, type of input current: three-phase, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, number of slots in tool magazine: 24, number of axes: 3, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 80 E machining center, manufactured in 1999, for sale. Serial number: 1109.0001113 Year of manufacture: 1999 Can be inspected while powered on Control system: Heidenhain 426m with internal hard drive If you have any questions or require further information, please do not hesitate to contact us via message or phone. The machine can be disassembled by the buyer. Rjdpfoz E Dl Nox Airjch No direct sales to countries outside the EU. We will not handle customs clearance.

Condition: used, functionality: fully functional, For sale is a Deckel Maho MH 600 CNC milling machine with a Philips/Grundig CNC 532 control system. The machine comes from our own machinery stock and can be inspected on-site by appointment. This is a robust CNC milling machine from Deckel Maho with an enclosed work area and a large T-slot clamping table. Technical data / features: Rcedpfjzwv Aajx Airjh * Manufacturer: Deckel Maho * Model: MH 600 * CNC milling machine / machining center * Control system: Philips/Grundig CNC 532 * 3 CNC axes * Travel range X: approx. 600 mm * Travel range Y: approx. 450 mm * Travel range Z: approx. 450 mm * Tool holder: SK40 * Coolant system * Enclosed work area * T-slot clamping table Important regarding the features: * No automatic tool changer * No chip conveyor * Tool changes are performed manually The Hilma machine vises shown in the photos are not included in the price. The machine is particularly suitable for single-part production, toolmaking, repair work, as well as small and medium-sized series. An inspection and demonstration can be arranged by appointment. Additional photos and information are available upon request. The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2882-0275, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller manufacturer: Deckel Maho, controller model: Dialog 112, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, workpiece weight (max.): 1,250 kg, total height: 2,900 mm, total length: 3,900 mm, total width: 4,100 mm, table width: 800 mm, table length: 1,250 mm, table load: 1,250 kg, rotational speed (max.): 8,000 rpm, overall weight: 9,100 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, For sale is a vertical CNC machining center, Deckel Maho DMC 100 V, manufactured in 1998. The machine is in good condition and fully functional. Technical data: Manufacturer: Deckel Maho GmbH Type: DMC 100 V Redpfxez I R Eus Airoch Year of manufacture: 1998 Serial number: 2882-0275 Travel in X: 1,000 mm Travel in Y: 800 mm Travel in Z: 700 mm Table size: approx. 1,250 × 800 mm Table load: approx. 1,250 kg Spindle speed: up to 15,000 rpm Tool holder: SK 40 Tool magazine: 30 positions Operating voltage: 400 V / 3-phase Rated current: 70 A Weight: approx. 9,100 kg If you are interested or have any further questions, please do not hesitate to contact us. Location: 30827 Garbsen.

Condition: good (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,600 rpm, controller model: DECKEL Contour 3, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 700 mm Table width: 460 mm Table load capacity: 350 kg Spindle speed: 40–3,600 rpm Tool interface: SK 40 MACHINE DETAILS Control system: DECKEL Contour 3 Rcjdpo Afxabsfx Airjh EQUIPMENT Automatic tool changer

Condition: good (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 4,000 rpm, table load: 300 kg, TECHNICAL DETAILS Rcodpfe Afxauox Airsh X-axis travel: 560 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Table length: 900 mm Table width: 530 mm Table load capacity: max. 300 kg Spindle speed: 40–4,000 rpm Number of speed steps: 21 Spindle power: 2–4 kW Tool interface: SK 40 (M16) Number of tool positions: 20 EQUIPMENT 20-position tool changer

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 1,600 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 90 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,000 kg, total height: 3,600 mm, total length: 8,017 mm, total width: 4,905 mm, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, rotational speed (max.): 10 rpm, overall weight: 35,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 28 W, spindle nose: HSK63A, number of slots in tool magazine: 60, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Equipped with: - 5 axes - Automatic pallet changer system - High-pressure coolant system running through the spindle with paper filter and 1000-liter tank Rsdpfx Aijzgbdzerjch - Automatic tool presetting system by BLUM - CE marking

Condition: good (used), Year of construction: 2001, functionality: fully functional, DECKEL MAHO DMU 60 T – CNC Universal Machining Center – 2001 Manufacturer: DECKEL MAHO Model: DMU 60 T Year of manufacture: 2001 Condition: Used CNC control: HEIDENHAIN Machine type: CNC Universal Machining Center Technical specifications Machine dimensions (L × W × H): 2,900 × 2,200 × 2,900 mm Machine weight: approx. 6,500 kg CNC control: HEIDENHAIN Rotary table Automatic tool changer Enclosed machining area Accessories Rcjdpfx As Acpageireh Tool holders and cutting tools shown in the photographs (inclusion in delivery to be confirmed) Rotary table Automatic tool magazine Description Used DECKEL MAHO DMU 60 T CNC universal machining center, manufactured in 2001, equipped with HEIDENHAIN CNC control and a rotary table. The machine is suitable for universal milling, toolmaking, and precision machining applications. The machine is offered with photographic documentation. Further technical details, availability, and scope of delivery can be provided upon request.

Condition: excellent (used), Year of construction: 2010, operating hours: 25,540 h, 1 used 5-axis machining center DECKEL MAHO DMU 50 with SIEMENS control Rjdpj Afbv Sofx Airech Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Rcsdsz Aa Idopfx Airsh Spindle speeds: 40-2000 rpm Quill with 60mm stroke Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise - Chip tray Milling cutters and tool holders can also be included upon request. Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.