Used Degreasing for sale (83)

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions - Length: 6,500 mm - Width: 3,000 mm - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm Hedpfxoffv Tpe Aameh 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm - Height: 3,416 mm 6. Manual Conveyor System The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 1,650 mm, total width: 1,770 mm, total height: 1,580 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 75 °C, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, workpiece weight (max.): 350 kg, cage diameter: 1,100 mm, TRL 1100 - 2021 - € 8,500 Industrial washing machine for cleaning and degreasing workpieces using an alkaline cleaning agent. The machine is constructed entirely from stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts, with spray nozzles for detergent above and below. Built-in filter for coarse contaminants. Fitted with a detergent pump and a drain pump to remove the used cleaning liquid. Level switches in the tank to detect fluid level. Monitoring of possible leaks. Control cabinet with digital temperature display. Cabinet fitted with a signal lamp for status indication. The machine is in very good condition and is ready for immediate use. Hjdjwfdpmopfx Aameh

Condition: new, Year of construction: 2025, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, rear discharge Hedpfx Aox Avkbsamoh Superstructure: Water tank roll-off container approx. 12,000 liters. ARCHIVE PHOTOS Water tank without platform approx. 12,000 liters – according to DIN 30722-1 - Clear internal dimensions (LxWxH): 5500 x 2394 x 1003 mm - Material grade: S235 (St-37) - Floor / wall plates: Smooth floor plate thickness 5 mm, sides 3 mm, roof and rear wall 4 mm - At the rear bottom: 2x Storz A-connection with ball valve (4 inch) - At the rear top: 1x Storz B-connection with elbow and cap (2 inch) - At the front top hook: 1x Storz B-connection with elbow, coupling, and cap (2 inch) - Galvanized and bolted step ladder on the front wall; vent pipe - Frame made of INP180 - On the roof: one manhole, diameter 600 mm - Inside: 3 baffle walls, diameter 600 mm (large cavities) - Watertight (tested for leak tightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200 300 μm, externally primed with epoxy resin paint 60 μm and coated with 2K paint (polyurethane paint B7) 40 μm in RAL shade 3000 red Comes with UVV sticker (DGUV), checklist (safety instructions), and warning marking – watertight (tested for leak tightness) ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Condition: new, Year of construction: 2025, color: red, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body, rear discharge Structure: water tank roll-off container approx. 12,700 L. Roll-off container/water tank from approx. 6,000L to 13,000L The tank shown has a volume of approx. 12,700L - Internal clear dimensions LxWxH: 5,400 x 2,400 x 1,200 mm (tank 4,600mm, platform 800mm) - Material quality: S235 (St-37) - Floor sheet/wall sheets: smooth floor sheet thickness 5 mm, sides 3 mm - Forklift pockets at base of the container - Rollers greasable - Top ventilation with cover/access hatch - Upper C-coupling with flap - Rear A-coupling with ball valve - Epoxy coating inside, 50 micron - Outside primed 40 micron and painted - Two internal baffle plates - Ladder on front wall right side - Additional C-coupling with ball valve, front, lower left on front wall Hsdpfx Aslu Hrusamoh Container is fully welded, degreased, blasted, primed inside with 50 µm epoxy coating, outside primed with 40 µm alkyd primer and painted with 40 µm alkyd resin in RAL color of your choice Delivery time: approx. 8–10 weeks Available from 6,000–13,000 liters, price depending on capacity between EUR 8,000.00 and approx. EUR 13,000.00 depending on volume Available with self-priming water pump, self-lubricating with separate drive motor, delivery rate: 129 m³/h (2,000 l/min), head: 17 m, particle size: 28 mm, fuel type: diesel, tank 4.3 liters, see 2907 at approx. EUR 4,000 extra charge! Available as roll-off container and tank. ACCESSORY INFORMATION WITHOUT WARRANTY. Subject to changes, prior sale, and errors!

Condition: new, Receiver capacity 2 x 37 l working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Hjdpfx Aasfv Au Aomeh Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 Hodpjww Adtjfx Aamjh -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: excellent (used), Year of construction: 2019, TITANIUM PICKLING PLANT Comprises 16 tanks Tank – Degreasing, large 1150 x 1000 x 1200/1250 mm Tank – Rinsing Tank – Hot rinse Tank – Etching Circulation pump 1 - Level probe; PTFE 1 - Temperature sensor 1 - Manual top-up DI water valve 1 - Manual lid 1 Hjdpfx Aoxa Dmloamjh - Supports 2 Complete titanium pickling plant

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Hodpfsfzk Ewex Aamjh

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Hodpfxsfz I N To Aamsh

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Hsdpfx Asfz Aw Hoamjh The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Hedpfxjfz Dtzo Aamjh The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. Hjdpfx Aaofz Ndysmsh the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Hedeflrc Sjpfx Aamsh Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Hedpjfz A H Dofx Aamsh - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace Hodow Tcruepfx Aamjh - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m The furnace can also be modified for nitrocarburizing. Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Condition: new, ELMAG WFM 210 Servodrive tool milling machine Incl. 3-axis position indicator Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out. The milling machines in the Servodrive series combine precision and economy and make the heart of every metal technician beat faster. The top ergonomic combination impresses with easy handling, infinitely variable speed control and an excellent price-performance ratio and is ideal for workshops, training companies and toolmaking. Standard equipment: - Digital position indicator - 4 long milling arbors 16, 22, 27, 32 mm - 3 reduction sleeves MK 1, 2, 3 - Operating instructions / CE ADVANTAGES: Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw on all axes X/Y/Z - Stepless drives on all axes - Coolant tank integrated in the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED milling table lighting - With +/- 90° infinitely variable swivel vertical milling head incl. degree scale - Incl. adjustable drill sleeve - Incl. included central lubrication - Digital speed display of the milling spindle - Rapid traverse on all 3 axes - Tiltable milling head +/- 45° Swivel control panel - Digital position display for maximum precision on all 3 axes - Milling spindle right and left rotation - Digital speed display - Potentiometer for infinitely variable control of the feed axes - Inching switch for rapid traverse of the milling axes - Coolant pump off/on - Emergency stop button TECHNICAL DATA: Drilling capacity in steel 50 mm Milling capacity face milling cutter 125 mm Milling capacity end mill 40 mm Spindle holder (turning spindle) ISO 40 Speed range 40 - 2000 rpm Infinitely variable speed steps Quill stroke 65 mm Hodpetw Akrefx Aameh Milling table grooves / width x distance 5 / 14 x 63 mm Vertical grooves / width x distance 3 / 14 x 63 mm Spindle projection 180 - 485 mm Milling head swivel range ± 45 ° Quill spacing table 50 - 450 mm Horizontal spindle distance table 145 - 545 mm Milling table surface 750 x 320 mm Table travel X x Z 405 x 305 mm Vertical table surface 890 x 225 mm Feed rates X/Y/Z 10 - 1000 mm/min Feed steps X/Y/Z stepless Motor power 3700 W Torque X-axis 7.7 Nm Torque Y-axis 7.7 Nm Torque Z-axis 1.7 Nm Mains connection 400/50 V/Hz Cubature 750x320x450 mm Length x width 1500 x 1700 mm Height 2000 mm Weight 1450 kg

Condition: new, ELMAG INDUSTRIE 1000/230 HD Universal center lathe 88173 incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Heavy lead and feed spindle lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models becomes clear as soon as you switch them on: barely audible drive noise. No vibrations at large cutting depths. In fact, at 2,635, 2,835 and 3,055 kg, the 230 HD models are the heaviest in their class and, thanks to their extremely robust design - e.g. high-frequency hardened prismatic guides - are ideally suited for heavy-duty and continuous operation. At 80 mm, the 230 HD offers an extra-large spindle bore for processing bar stock up to 2 1/2 inches in diameter (76.1 mm). A turning size via slides of Ø 290 x 1,000, 1,500 or 2,000 mm and a maximum turning diameter of 460 or 700 mm leave almost nothing to be desired for machine, steel, plant and tool construction - as well as 12 speeds for 170 longitudinal and cross feeds and 150 leadscrew pitches for metric and inch threads. Standard equipment: - including digital position indicator - RÖHM three-jaw lathe chuck Ø 250 mm - Four-jaw faceplate chuck Ø 315 mm - Clamping disk Ø 350 mm - 2 fixed centers - Rotating center point MK 5 - Moving steady rest - Steady rest - Quick-change steel holder set, 5-piece MB - Thread gauge - Halogen machine lamp - Emergency stop button / zero voltage release - Rotating chuck guard with safety switch - Underframe / chip tray / splashback - Tool kit / operating instructions / CE Special accessories: - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set for turning tool set 25 x 25 mm - Turning tool set 'Camlock' 25 x 25 mm, 7-piece - Cut-off tool holder 25 x 25 mm, length 150 mm - Cutter for cut-off tool holder 25 x 25 mm ADVANTAGES: - 'CE' compliant machines with maximum safety and machine accuracy in accordance with DIN - Powerful and robust for trade & industry - Coolant tank and pump integrated in the machine base TECHNICAL DATA: Center width 1000 mm Center height 230 mm Turning diameter over bed 460 mm Turning diameter over slide 290 mm Turning diameter without bridge 700 mm Machine bed width 340 mm Bridge length 200 mm Cross slide travel 280 mm Top slide travel 100 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 8 Spindle holder (turning spindle) MK 7 mm Spindle bore 80 mm Speed 25 - 1800 rpm Speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Transverse feeds (170) 0.02 - 1.23 mm/rev Metric thread dimension (24) 0.5 - 20 mm metric modular thread (20) 0.25 - 10 mm Inch thread, threads G (61) 1-5 / 8 - 72 G/' Inch modular thread, threads G (45) 3-1 / 4 -96 G/' Lead screw pitch 6 mm Lead screw diameter 40 mm Quill holder MK 5 Quill diameter 75 mm Quill travel 130 mm Motor power 5500 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2310 mm Hsdpfxotw Dxks Aamoh Height (total) 1255 mm Weight 2635 kg

Condition: new, ELMAG Universal lathe INDIVIDUAL 1000/200 - Vario incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Individual 1000/200 The Individual is a compact center lathe for the individualist and is ideally suited for training and maintenance. With infinitely variable speed control and a digital speed display, the machine always allows the cutting speed to be precisely matched to the material. Thanks to its precision bearings and 850 kg weight, the machine runs particularly smoothly and is designed for demanding continuous operation. It enables the production of turned sizes using slides up to Ø 200 x 1,000 mm. The INDIVIDUAL 1000/200 is powered by a 2,400 watt motor, has infinitely variable speed adjustment from 45 - 2,500 rpm and 48 longitudinal and cross feeds. ADVANTAGES Coolant tank and pump integrated in the machine base Stepless speed adjustment incl. digital display LED lighting Automatic central lubrication Digital position indicator for 3 axes with color display Electromagnetic motor brake Large protective cover for a clean working environment TECHNICAL DATA Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over slide 260 mm Hjdpfx Aot Ef Hqjamsh Turning diameter without bridge 560 mm Bridge length 235 mm Cross slide travel 175 mm Top slide travel 95 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 5 Spindle holder (turning spindle) MK 5 mm Spindle bore 51 mm Speed 45 - 2500 rpm Infinitely variable speed steps Longitudinal feeds 0.043 - 0.653 mm/rev Transverse feeds 0.027 - 0.413 mm/rev Metric modular thread 0.4 - 7 mm Inch thread, threads G 4 - 56 G/' Inch modular thread, threads G 4 - 56 G/' Lead screw pitch 4 mm Lead screw diameter 22 mm Quill holder MK 3 Quill diameter 50 mm Quill travel 120 mm Motor power 2400 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2114 mm Width (total) 998 mm Height (total) 1700 mm Weight 850 kg

Condition: good (used), Year of construction: 2003, Well-maintained perchloroethylene washing system, Washing cycles: pre-wash and main wash, Steam degreasing and conservation one additional tank, Useful dimensions: l 530 x w 320 x h 200 mm, Voltage: 400V 50 Hz Power requirement: 58.5 kW, Accessories: 1 - Air-cooled, 3rd bath as conservation bath, 2 - Adjustable turbulence-immersion washing system, 3 - Basket rotation device, basket clamping device, Hedpfxsw I Exyo Aamjh 4 - Acid detector for LM Per, exhaust-free with activated carbon, 5 - Automatic dual-track loading system, 6 - Batch preselection for up to 20 washing programs, 7 - Filter-in-filter for pre-wash bath, Dimensions/weight Washing unit: L 4.40 x W 2.20 x H 2.40 m, Weight: 6000 kg automatic loading: 3.90 x 1.40 x H 1.40 m, Weight: 700 kg, Additional tank: 2.20 x 1.20 x 1.40, weight 800 kg

Condition: new, functionality: fully functional, Pretreatment system for wet chemical cleaning of workpieces to be coated - NEW - As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our location in 47669 Wachtendonk, we put your individual needs into practice and produce your desired concept. Thanks to our own production for almost all components, we are flexible and can respond specifically to your requirements. With us, you not only get your ideal powder coating system - we also have comprehensive user expertise at your side to support you with all questions about surface technology. Every item offered here is manufactured especially for you. Regardless of whether it is a large or small project - we supply complete systems from a single source, according to your ideas. We look forward to hearing from you and implementing your ideas together! Here we offer you our newly manufactured VBH KM Pro pretreatment system for part dimensions of up to 4,000x1,400x2,000mm. System description: Pretreatment system for wet-chemical cleaning of workpieces before coating using the 3-zone process + nozzle line for loss. Equipment: -Washing stations for up to 2 traverses in one cleaning cycle Hedpstxcyiefx Aamjh -3 rails (1 middle, 2 side washing stations) -Washing ring with removable middle nozzle line (Info: The middle nozzle line is used when 2 rails with flat workpieces are to be cleaned at the same time; without the middle nozzle line, wider workpieces can be moved in and cleaned on the middle guide rail.) -4 washing zones (degreasing circuit, 1st rinse (pre-rinse) circuit, 2nd rinse (final rinse) demineralized water cascading to degreasing basin 1 -final spray ring (zone 4) for passivation in the no-rinse process when pulling out the goods carriers (duration of fogging adjustable) Passivation is injected into demineralized water. Inlet in basin 1. -2 storage containers made of stainless steel including level monitoring (sink 1 + demineralized sink) -1 stainless steel container insulated, as electrically heated, including level monitoring (degreasing) -Drain taps on the basins for disposal, cleaning and new preparation -Supply of the VE water requirement via mixed bed cartridges -Exhaust fan to remove the water vapor to the outside including exhaust pipe -Cabin made of stainless steel -Loading via double-wing door -Operating terminal (PLC controlled) outside the washing cabin -Control via PLC and touch display including remote maintenance module -Intuitive, illustrated operation for quick and easy handling Suitability: -particularly for flat workpieces, as the use of the central line means 2 product carriers can be cleaned at the same time -Frames and uncomplicated, open geometries up to a maximum of 1,000 mm wide can also be cleaned well Advantages: -Personnel-free, automatic cleaning, within approx. 20 minutes. -optimal adhesion properties especially for the subsequent coating -fully parameterizable process program from KM Industrieservice, thus completely flexible for changed chemical systems -lifetime support and spare parts availability from KM Industrieservice -cost-effective pretreatment solution with service life-optimized tank quality, thus also cost-effective wastewater disposal We can send you a video link to this system on request.

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: Hsdpfx Aaow Ewl Uemjh 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: new, Year of construction: 2025, Equipment: CE marking, Versatile 3-in-1 fiber laser with 3kW power, suitable for: - Cutting various metal sheets with high precision. - Welding with clean, strong weld seams. - Cleaning and degreasing surfaces before further processing. ✅ Compact and user-friendly design Hsdpfx Aajw Srtfjmsh ✅ Ideal for workshops and metalworking companies ✅ Efficient alternative to multiple individual machines Technical specifications: Power: 3 kW Functions: Cutting, welding, cleaning Application: Steel, stainless steel, aluminum, ... Availability: Immediately available from our showroom in Belgium Warranty: 2 years

Year of construction: 2025, condition: as good as new (ex-display), HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Hodpfx Aajhl If Temsh Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Hjdpjhl Ifzjfx Aamsh Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Hedpfjhl If Nex Aamsh Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm