Used Degreasing for sale (83)

Condition: new, Year of construction: 2025, color: grey, empty load weight: 860 kg, loading space volume: 10 m³, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel structure Structure: Tipper container approx. 10m³ asymmetrical/open Tipper container 10 cbm open asymmetrical - old DIN Material quality: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipper bearing: triple tipping bearing on one side - with warning markings - UVV sticker - container tested and approved according to UVV - Net or tarpaulin hooks all around - 4x mounting bolts - Mounting bolts and tipping bearing ST 52 Hjdpfxox Ni Rde Aamjh - Corners reinforced inside and outside Container fully welded, degreased, blasted, primed inside and outside with alkyd base paint 40 µm and painted outside with alkyd resin paint 40 µm in RAL7016 anthracite gray ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors excepted! - .

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Hodpfxev Ed Uks Aamoh Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ Hjdpfx Aewdpq Heamjh ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – Efficient. Environmentally friendly. Safe. The future of surface finishing begins here: With wet blasting solutions from Proton Maschinenbau GmbH, you can rely on uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully automated, our systems guarantee precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting systems combine water, compressed air, and a suitable blasting media to create a highly effective cleaning process that offers clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to the integrated jet pulse filter system ✔ Homogeneous, contamination-free surfaces – no chemical additives ✔ Gentle processing of sensitive materials without embedding blasting media ✔ Optimal results for degreasing, paint stripping, structuring, and cleaning ✔ Energy- and resource-efficient process, suitable for numerous blasting media ✔ Ideal for demanding industries such as aviation, medical technology, the automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blasting cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for rim processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotating platform, wash basin, and transport trolley All machines feature: 🔧 Stainless steel housing with laser seam 🖥️ Intuitive PLC touch panel with programming and maintenance instructions 💡 LED interior lighting, safety features, and automated media return Areas of application: Cleaning aluminum or plastic molds, deburring precision parts, preparing implants or prototypes from additive manufacturing – we offer the right solution for every application. Proton stands for: 2-year warranty on manufacturing quality, 10-year spare parts availability, personalized consulting, and robust systems "Made in Germany." 👉 Discover the advantages of wet blasting technology now – and reach a new level of surface finishing.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Hsdpfx Askwct Ueamjh Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Hodpfed I Aw Esx Aameh Rotary basket washer Please feel free to contact for other details and options.

Condition: new, Year of construction: 2024, Helical washer, spiral tunnel for small parts like bolts, screws, joint and small metal parts. Industrial parts washer for mass production, ideal solution for chip and oil removal. Perfect parts washing systems for degreasing and precise cleaning. Operation Principles: Work pieces are washed rinsed and dried with detergent and pressurized hot water spray in helical conveyor tunnel. Application Areas: -Machined parts like rivets, nuts, bolts, screw etc. -Textile accessories as zip, button, snap, fastener etc. -Fittings and equipments for gas regulators, hot water pipes lines, natural gasline etc. -Sanitary Industry; fittings and armature Processes: -Spray wash Hjdpfxjd I E Irs Aamjh -Spray rinsing -Drying All of the HELIWASHes are tailor-made and have lots of options according to your needs. Please feel free to contact us for technical details.

Year of construction: 2023, condition: new, INTERSONIK is established in 1988 and since then manufacturing industrial cleaning machines both ultrasonic type and sprayed type. INTERSONIK always has high standards and aims to provide solid and durable products to its customers. Ultrasonic washing machines are designed and manufactured with the 30 year of experience and engineering that belongs to INTERSONIK from A to Z. K model ultrasonic cleaning devices are perfect parts washing systems for degreasing and precise cleaning. Some Details About Ultrasonic Machines: -28 Khz ultrasonic frequency -AISI 304 or AISI 316 Stainless Steel -Automatic fill valve -Liquid level control -Pump filter -Unlimited basket options -Unlimited size and number of tanks -Many other options and extras ultrasonic washing machine, ultrasonic cleaner, ultrasonic degreaser, ultrasonic for automotive, ultrasonic for coating industry, 28 Khz ultrasonic cleaner Please feel free to contact us for details and other choices. Hodpfx Aaod Iz Dnjmsh

Year of construction: 2023, condition: new, INTERSONIK MINISONIK series provides fast, reliable and economic solution in parts washing! Perfect parts washing systems for degreasing and precise cleaning Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Minisonik ultrasoniks washer are available in 4 different size, 4l , 12l , 18l and 28 liter versions. All minisoniks are ready for delivery. Minisonik’s Standarts: - Machine is produced completely in stainless stell - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s Hjdpfjd I Dnvex Aameh elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. ► Dentist instruments. ► Jewellery products. ► Electronic components and PCB cards. ► Textile industry equipments. Please check the technical specifications in the attached document. ultrasonic cleaner, 18 liter ultrasonic cleaner, 12 liter ultrasonic cleaner, 4-liter ultrasonic cleaner, 28-liter ultrasonic cleaner, tabletop ultrasonic cleaner, benchtop ultrasonic cleaner Please feel free to contact us for further details

Year of construction: 2023, condition: new, Ultrasonic cleaner with PLC, specially designed for medical needs. Capacity: 50 Liter Automatic filling: Available Hsdpfxofg Eqwe Aamjh Automatic dosing: Available Lid: Pneumatic piston Programmable: Yes with PLC Liquid level control: Available ultrasonic cleaner, ultrasonic degreasing machine, ultrasonic washer, small ultrasonic washing machine, medical ultrasonic cleaner, automative

Condition: new, Year of construction: 2024, Tunnel type parts washer for metal and plastic parts. Used in different sectors like automotive, food, metal machining, sheet metal, plastic crates etc. Operation Principles The work piece enters in tunnel by means of belt conveyor system; the positioned nozzles wash every piece of the work piece. The work piece, while passing through the tunnel is washed by pressurized and heated water + chemical mixture. All oil, chip and other industrial contaminations are removed from the surface of work piece during this washing process. Tunnel washing machines are standardized as well as specially tailored according to application by INTERSONİK engineering department. Washing Process Flow Washing, passivation and drying are designed exclusively by the Intersonik Process Engineers in accordance with the desired results supported by Intersonik environmental friendly chemicals. Operation Process ► Pre wash ► Main wash ► Rinsing ► Passivation ► Drying Application Areas ► Automotive industry ► Military defense industry ► Food industry ► In all manufacturing industry for mass production and maintanance purpose ► Metal furniture industry Conveyor is specially designed and manufactured by INTERSONIK according to your needs and work piece. Conveyor speed is adjustible. Automatic liquid fill is standart. Electrical heating is standart heat exchanger and burner heating types are optional. Hjdpjd I Azvsfx Aameh All data is visible and controllable via digital screens PLC control is optional. All liquid tanks are isolated for heat retention. Mist collecting vacuum pump and unit is standart. Please feel free to contact with us for other options and details. tunnel washing, automatic washing, automotive parts washing, metal washing, parts washer, degreasing, spray washing, pressurised washing machine

Year of construction: 2023, condition: new, INTERSONIK ROBOWASH provides effective washing solution for mass production of metal industry! Perfect parts washing systems for degreasing and precise cleaning. With the Automatic Cartesian Conveying Systems, full automation is provided in Industrial Washing and the process is carried out very fast with no need of an operator. Application Areas: ► Surface cleaning prior to the coating and painting process ► In the automotive industry, pistons, valves, engine blocks, shock absorbers and all other spare parts' sensitive cleaning. ► Machined parts, fittings, installation parts cleaning Hjdpfx Aod I A A Soamsh ► Fork, spoon, knife, door handle and base and all metal goods and accessories cleaning ► Refrigerator, dishwashers, oven, etc, spare parts cleaning ► Medical and surgical instruments cleaning ► Electronic industry and PCB cleaning Advantages ► Oil, chip, polishing residue, and industrial contaminations are cleaned precisely ► Leaves durable and clean surface against corrosion ► Works very fast and safe does not need an operator. Operation Processes ► Pre wash ► Ultrasonic wash ► Rinsing ► Pasivation ► Drying Ideal for automative and metal machining industries ultrasonic washing plant, robot transfer ultrasonic washer, coating plant, robot ultrasonic washing, parts washing Please feel free to contact with us for other details and reference list.

Year of construction: 2023, condition: new, INTERSONIK MIDISONIK series provides fast, reliable and economic solution in parts washing! Intersonik ultrasonic cleaners are perfect parts washing systems for degreasing and precise cleaning. Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Midisonik ultrasonic washers are available in 4 different size, 40l , 50l , 60l and 80 liter versions. Midisonik’s Standarts: - Machine is produced completely in stainless stell Hedpfod I Dpdox Aameh - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. ► Dentist’s instruments. ► Jewellery products. ► Electronic components and PCB cards. ► Textile industry equipments. Please check technical spesifications in the attached document. ultrasonic cleaner, ultrasonic washing machine, 40 liter ultrasonic cleaener, 50 liter ultrasonic cleaener, 60 liter ultrasonic cleaener, 80 liter ultrasonic cleaener, ultrasonic cleaner for automotive, ultrasonic degreaser Please feel free to contact with us for further details.

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 Hedpfx Aajx H Tv Sjmoh ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Hsdpfxox H Tv Eo Aamoh Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust. Hedov S Dk Sjpfx Aamoh

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5m³, ARCHIVE IMAGES - Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions LxWxH: 4500x2300x500 mm Material quality: S235 Hedpfx Asx E Tg Uoamoh Floor / wall thickness: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear variant: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Free-standing hook Incl. warning markings, UVV badge (DGUV), checklist (safety instructions) All containers are welded, degreased, shot-blasted, primed inside and out with 60 μm alkyd primer, and outside painted with 40 μm alkyd resin paint in RAL 7016. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Hsdpfx Aaex E Thfemsh Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions - Length: 6,500 mm - Width: 3,000 mm - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth Hsdpfx Aaeffv Tpjmeh 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm - Height: 3,416 mm 6. Manual Conveyor System The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 1,650 mm, total width: 1,770 mm, total height: 1,580 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 75 °C, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, workpiece weight (max.): 350 kg, cage diameter: 1,100 mm, TRL 1100 - 2021 - € 8,500 Industrial washing machine for cleaning and degreasing workpieces using an alkaline cleaning agent. The machine is constructed entirely from stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts, with spray nozzles for detergent above and below. Built-in filter for coarse contaminants. Fitted with a detergent pump and a drain pump to remove the used cleaning liquid. Level switches in the tank to detect fluid level. Monitoring of possible leaks. Control cabinet with digital temperature display. Cabinet fitted with a signal lamp for status indication. The machine is in very good condition and is ready for immediate use. Hjdpfx Aewfdpmjamoh

Condition: new, Year of construction: 2025, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, rear discharge Superstructure: Water tank roll-off container approx. 12,000 liters. ARCHIVE PHOTOS Water tank without platform approx. 12,000 liters – according to DIN 30722-1 - Clear internal dimensions (LxWxH): 5500 x 2394 x 1003 mm - Material grade: S235 (St-37) - Floor / wall plates: Smooth floor plate thickness 5 mm, sides 3 mm, roof and rear wall 4 mm - At the rear bottom: 2x Storz A-connection with ball valve (4 inch) - At the rear top: 1x Storz B-connection with elbow and cap (2 inch) Hjdpfox Avkbjx Aamoh - At the front top hook: 1x Storz B-connection with elbow, coupling, and cap (2 inch) - Galvanized and bolted step ladder on the front wall; vent pipe - Frame made of INP180 - On the roof: one manhole, diameter 600 mm - Inside: 3 baffle walls, diameter 600 mm (large cavities) - Watertight (tested for leak tightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200 300 μm, externally primed with epoxy resin paint 60 μm and coated with 2K paint (polyurethane paint B7) 40 μm in RAL shade 3000 red Comes with UVV sticker (DGUV), checklist (safety instructions), and warning marking – watertight (tested for leak tightness) ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Condition: new, Year of construction: 2025, color: red, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body, rear discharge Structure: water tank roll-off container approx. 12,700 L. Roll-off container/water tank from approx. 6,000L to 13,000L The tank shown has a volume of approx. 12,700L - Internal clear dimensions LxWxH: 5,400 x 2,400 x 1,200 mm (tank 4,600mm, platform 800mm) - Material quality: S235 (St-37) - Floor sheet/wall sheets: smooth floor sheet thickness 5 mm, sides 3 mm Hodpfx Aaslu Hrujmsh - Forklift pockets at base of the container - Rollers greasable - Top ventilation with cover/access hatch - Upper C-coupling with flap - Rear A-coupling with ball valve - Epoxy coating inside, 50 micron - Outside primed 40 micron and painted - Two internal baffle plates - Ladder on front wall right side - Additional C-coupling with ball valve, front, lower left on front wall Container is fully welded, degreased, blasted, primed inside with 50 µm epoxy coating, outside primed with 40 µm alkyd primer and painted with 40 µm alkyd resin in RAL color of your choice Delivery time: approx. 8–10 weeks Available from 6,000–13,000 liters, price depending on capacity between EUR 8,000.00 and approx. EUR 13,000.00 depending on volume Available with self-priming water pump, self-lubricating with separate drive motor, delivery rate: 129 m³/h (2,000 l/min), head: 17 m, particle size: 28 mm, fuel type: diesel, tank 4.3 liters, see 2907 at approx. EUR 4,000 extra charge! Available as roll-off container and tank. ACCESSORY INFORMATION WITHOUT WARRANTY. Subject to changes, prior sale, and errors!

Condition: new, Receiver capacity 2 x 37 l working pressure 4 - 8 bar Air consumption 170 - 500 l/min. Hsdefv Au Aepfx Aamsh weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses Hjdpfeww Adtex Aamsh - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: excellent (used), Year of construction: 2019, TITANIUM PICKLING PLANT Comprises 16 tanks Tank – Degreasing, large 1150 x 1000 x 1200/1250 mm Tank – Rinsing Tank – Hot rinse Tank – Etching Circulation pump 1 - Level probe; PTFE 1 - Temperature sensor 1 - Manual top-up DI water valve 1 - Manual lid 1 - Supports 2 Hodpfsxa Dmljx Aamjh Complete titanium pickling plant

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Hedpfx Ajfzk Eweamoh materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.