Used Degreasing for sale (79)

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VF353, The "CeBeCo®" TROWAMAT® XL is suitable for cleaning wash items whose contaminants can be removed by spraying with detergent under pressure. The inserted basket, filled with wash items, is evenly passed by the nozzles positioned above and below, via a carousel wheel. Additionally, the wash items are sprayed by a nozzle system in the door and at the rear of the unit. Thanks to the high spray pressure and low rotation speed, a consistent cleaning result is achieved. TECHNICAL DATA Type: "CeBeCo®" TROWAMAT "XL" Size 40100/40 WST Drawing No. 3314-20 Tank: Approx. 3 mm thick stainless steel sheet 1.4301 Insulation: 25 mm mineral wool / Terodem Cladding: 1 mm galvanized steel sheet Usable dimensions: approx. 400 mm x 1,000 mm x 400 mm (height) Load capacity: max. 100 kg, with evenly distributed load Overall dimensions: approx. 2,700 mm x 1,825 mm x 2,530 mm (height) without roller conveyor Entry height: approx. 1240 mm Detergent: service water, aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Detergent tank volume: approx. 460 L Rinse agent: aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Rinse agent tank volume: approx. 240 L Kedpfx Aoyr Dkcjbcelp The offer includes roller conveyor and washing baskets. For further information, please contact us.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 180100063, Fully functional parts degreasing unit. No known defects. The machine features a washing zone (high-pressure nozzles), a rinsing zone (high-pressure nozzles), and a hot air drying zone at the discharge. The machine could not be utilized as planned and is therefore offered for sale. Inspection is possible, but only with prior notice well in advance. All water tanks are drained and will need to be refilled for operational readiness. Please inquire only if seriously interested. Klodpex D U Nxjfx Abcsp

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Kjdowty H Depfx Abcelp Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Bous Waschfix 70/T3 WSA cleaning and degreasing plant BOUS Cleaning & Degreasing Plant Washfix 70/T3 WSA Special equipment: Ultrafine filter Drain pump Filter monitoring Klodpfjpudubjx Abcsp Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2009, condition: good (used), Bous Waschfix WSA 70 T3 cleaning and degreasing system BOUS cleaning & degreasing plant Waschfix WSA 70 T3 Usable space: 700 mm filling quantity: 180l / 180l Temperature +70 / +70 °C heating: 12 / 6 kW suction: 0,25 kW drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Kodpfxspq N I Dj Abcslp Special equipment: Ultrafine filter Drain pump Filter monitoring Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2014, condition: excellent (used), Bous Waschfix T6/70 WSA cleaning and degreasing plant BOUS Cleaning & Degreasing Plant Washfix T6 / 70 WSA Usable space: 700 mm filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW exhaust: 0,56 kW drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2014 Kjdpfx Aepuduxebcolp Special equipment: Ultrafine filter Drain pump Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, 2x degreasing, 2x rinsing, 1x residual water dryer, heating medium: natural gas, wastewater treatment unit, make Loft, burner, make Buderus, desalination unit, heat exchanger, switch and control cabinets, platform system, accessories Kljdpfx Abex R D Ndscop +++ Attention: Machine is part of an online auction! +++

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21224, 2-stage washing system with lifting door Electrically heated, total approx. 50 kW Loading capacity: 1,000 kg Maximum part size: d=1,400 mm, h=800 mm Kjdpfx Abex Hplvjcelp All parameters adjustable Documentation and operating manual available

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, IFP - KP50HYBRID Metal Degreasing and Cleaning System HYBRID Technology: Solvent-based and aqueous component cleaning in a single system. Demonstration unit, year of manufacture: 2024 Condition: As new Technical specifications: • Usable solvents/cleaners: modified alcohol (Alll) + water with detergent • Basket dimensions (L x W x H): 480 x 320 x 200 mm • Maximum basket weight: 50 kg • Throughput: 3 - 8 batches/hour • Connected load: 30 kW • Energy consumption: 15 kWh • Compressed air: 6 bar • System dimensions (L x W x H): 3000 x 2000 x 3000 mm • System weight: 4,100 kg • System cooling: Air/water-cooled (customer-side chilled water supply required) System features: • Fully enclosed system design • Service doors • Rotating and swiveling device • Front loading with safety glass door • 2 buffer tanks for solvent • 2 buffer tanks for water Kjdpex Ivtpsfx Abcolp • Ultrasonic cleaning equipment • Process filtration • Fine filtration • Intensive vacuum drying • 12'' touch panel • Sliding table with two basket stations • Preservation unit • Online access for remote maintenance

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, input voltage: 380 V, This is a cleaning/degreasing system with automatic loading. The components to be cleaned are automatically conveyed into the cleaning system in washing baskets (see photos). The system is fully functional and can be inspected during operation. Spare parts: The spare parts we have in stock for this system can be purchased additionally based on negotiation. Kodpfeyb R Rhex Abcjlp

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Kedshfv D Sopfx Abcelp Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Ksdsyn Rgvspfx Abcolp Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management Kedpfx Ajxn Tywsbcjlp - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: new, color: grey, overall weight: 10,000 kg, maximum load weight: 9,290 kg, empty load weight: 710 kg, loading space volume: 7 m³, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body Body: skip container approx. 7 m³ asymmetric/open, skip container 7 cbm open asymmetric - old DIN Klodpfx Absvhiz Uecsp Material quality: SJ235 (ST37-2) Floor plate / side plates: 6 / 4 mm Tipping bearings: triple, one-sided tipping bearing - with warning markings - UVV inspection label – Container tested and approved according to UVV - Continuous net or tarpaulin hooks - 4x mounting pins - Mounting pins and tipping bearings ST 52 - Corners reinforced inside and outside Container fully welded, degreased, shot-blasted, primed inside and outside with 40 µm alkyd primer, and finished externally with 40 µm alkyd resin paint in RAL7016 anthracite grey Price per unit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, color: grey, overall weight: 10,000 kg, loading space volume: 10 m³, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body Body: approximately 10m³ open, asymmetric roll-off container - old DIN standard Material grade: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipping bearings: triple-sided, single-sided tipping bearings - with warning markings - UVV sticker – container inspected and approved according to accident prevention regulations (UVV) - Continuous net or tarpaulin hooks - 4x mounting bolts - Mounting bolts and tipping bearings made from ST 52 - Corners reinforced inside and outside Kledpsvhi Afsfx Abcjp Container fully welded, degreased, shot-blasted, primed inside and outside with 40 µm alkyd primer, and painted outside with 40 µm alkyd resin paint in RAL7016 anthracite grey Price per unit! ACCESSORY SPECIFICATIONS WITHOUT WARRANTY, subject to change, prior sale, and errors! -

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 2.765, We are offering this used BvL cleaning system, DTH-2 DTH-2 1000/2000/3000, year of manufacture 2013. Automatic cleaning and degreasing unit for fast and economical cleaning of oil-contaminated and soiled workpieces using aqueous solutions on an alkaline, neutral, or acidic basis. Equipped with manually operated sliding doors at the front and rear. Cleaning is performed by an integrated spray system inside the treatment chamber using an oscillating special nozzle system with wide-band nozzles. Includes complete overhead rail and lifting system from Soloan for suspending and transporting components. Type: DTH-2 / 1100/1900/3500 Year of manufacture: 2013 Kodoyngg Sjpfx Abcslp Machine number: 2.765 Pump power: 7.5 / 5.5 kW Heating capacity: 60.0 / 42.0 kW Tank volume: 1500 / 1500 liters The system must be dismantled and collected by the buyer. Further details upon request. If you have any questions or require more information, feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2026, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Kjdpfehl Ifzjx Abcelp Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 510 mm, total length: 500 mm, total height: 420 mm, maximum load weight: 125 kg, tank capacity: 110 l, overall weight: 150 kg, Ultrasonic cleaning device with a 100-liter capacity, operating at frequencies of 28 kHz and 40 kHz. The tanks are equipped with an electric heating system ranging from 200W to 500W, depending on the model, in addition to an ultrasonic power output of 1000W. This ultrasonic cleaning machine features a 3/8" drain outlet. Kodpsypcunefx Abcjlp Ultrasonic cleaning system with patented technology The SL series ultrasonic cleaning systems, designed for static loading, are specifically engineered for advanced processes such as disinfection, pickling, cleaning, and degreasing, as well as for removing scale from a wide range of industrial parts and materials. Each tank includes at its base a removable static platform, precision-engineered to withstand the maximum static load specified in the technical data sheet. Starting from the 1000-liter model, all units are equipped with an automated lid opening and closing mechanism, optimizing operational safety and efficiency. DCM Ultrasonic – specialists in ultrasonic cleaning.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, Fully Automatic Solvent Cleaning System KP50 HMA For operation with solvents (hydrocarbons or modified alcohol) under full vacuum. The cleaning and drying process runs fully automatically in a closed working chamber under vacuum. Component cleaning is performed via spraying, turbulence flooding, ultrasonic cleaning, and vacuum-assisted cleaning with freshly filtered and distilled solvent from the two storage tanks. Additionally, the system offers vapor degreasing with ultra-pure solvent vapor directly from the main distillation system. The final vacuum drying step ensures components are 100% dry, and the dual condensation stage minimizes solvent loss as well as emission and workplace exposure values (AGW). Technical data / Equipment: - 2-tank FULL VACUUM system incl. main and bypass distillation - Designed for flammable solvents (FP >55°C) - Includes basket holder with swing/rotation device - Basket dimensions: 520 x 320 x 200(h) mm - Batch weight: max. 50 kg/batch - System dimensions: approx. 2,300 x 2,250 x 3,000 mm (W x D x H) - Ultrasonic: 750 W, 40 kHz - 2 bag filters size 1 + preparation for an additional filter - Automatic working chamber door - Working chamber door in glass - Double loading table (sideways movable) in front of working chamber - 12" control panel Kledpfxeyi Sf Nj Abcsp - Main and bypass distillation - Remote maintenance module A chiller unit can be supplied optionally, if no cooling water is available on site. Price excl. VAT, transport, assembly/commissioning

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum Kljdpfoffv Tpjx Abcjp The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions - Length: 6,500 mm - Width: 3,000 mm - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm - Height: 3,416 mm 6. Manual Conveyor System The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For consistently clean components in continuous operation Continuous flow cleaning system made of stainless steel with oil separator for uninterrupted material throughput. The parts to be cleaned pass continuously—or, if needed, in cycles—through successive treatment zones. Cleaning is carried out by passing the parts by fixed nozzle systems. Designed for components with dimensions approx. 400 x 100 x 200 mm Wire link conveyor transports the components lying flat or standing upright through the cleaning system • Surrounding nozzle frame – the offset nozzle arrangement enables all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle and frame adjustment to suit component • Customizable useful dimensions, load capacity, and pump output Process steps occur in successive treatment zones: • Spray cleaning – series connection of various wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank capacities: Washing tank: 800 liters Kodpjxcun Eefx Abcelp Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pumps: 3.0 kW Rinsing tank pumps: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine includes stainless steel drip trays for leakage protection—these are included in the price and will be delivered with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Year of construction: 1996, condition: ready for operation (used), Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment. Kedpfxex Ect Is Abcjlp

Year of construction: 2018, condition: ready for operation (used), Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible. Kljdpfx Abow S Tymjcjp

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Kjdpfod I Aw Esx Abcslp Rotary basket washer Please feel free to contact for other details and options.

Condition: new, Year of construction: 2024, Helical washer, spiral tunnel for small parts like bolts, screws, joint and small metal parts. Industrial parts washer for mass production, ideal solution for chip and oil removal. Perfect parts washing systems for degreasing and precise cleaning. Operation Principles: Work pieces are washed rinsed and dried with detergent and pressurized hot water spray in helical conveyor tunnel. Application Areas: -Machined parts like rivets, nuts, bolts, screw etc. -Textile accessories as zip, button, snap, fastener etc. -Fittings and equipments for gas regulators, hot water pipes lines, natural gasline etc. -Sanitary Industry; fittings and armature Processes: Kljdpfjd I E Irex Abcsp -Spray wash -Spray rinsing -Drying All of the HELIWASHes are tailor-made and have lots of options according to your needs. Please feel free to contact us for technical details.