Used Degreasing for sale (96)

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, total width: 3,000 mm, total length: 3,000 mm, total height: 2,800 mm, IFP - KP 100 WTR Metal Degreasing and Cleaning System Key Specifications: - New system: Year of manufacture 2026 - Usable media: Water with cleaning additive - Basket dimensions (LWH): 670 / 480 / 300 [mm] - Throughput: approx. 4 batches/hour - Filling volume: 1130 liters - Connection power: 33 kW - Compressed air: 6 bar - System weight: 2600 kg System Equipment - Fully enclosed system design - Rotating and pivoting mechanism - Front loading - 3 x Flood pre-treatment tanks (heated) - 1 x Process filter cleaning tank - 1 x Process filter rinsing tank - 1 x Process filter rinsing tank 2 - Surface rinsing Hjdpszf Hp Tjfx Airow - Glass door - Electropolished work chamber - Oil separator - Hot air drying - Vacuum drying - Sliding table with two positions - Dosing system for cleaning agents - Ultrasonic 1 kW / 25 kHz (power adjustable) - Spraying via four nozzles - 12" touch panel - Automatic water replenishment

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Equipment: lighting, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (suitable for multi-metal processing) All dimensions and further modifications can be considered during design and planning. The offer includes the following components: Pretreatment booth incl. reverse osmosis system Walk-in coating booth Powder gun Powder curing oven Dryer Manual conveying system Lift/lower station Electrical control Details: 1. Walk-in cleaning booth, pretreatment for steel and aluminum The cleaning booth is designed for automatic cleaning, using medium pressure spraying. The booth contains 7 different spray tanks. The maximum part dimensions are L = 6000 mm, W = 2000 mm, H = 2300 mm. 1 Booth dimensions Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Dimensions of complete pretreatment system Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process Degreasing/Neutral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2. Process Acidic mineral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 3. Process Rinse 1 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 1 minute 4. Process Rinse 2 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds. 5. Process Rinse 3 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds 6. Process Nano-ceramic coating This process uses ambient temperature, time = 0.75-1.5 minutes, draining time = 60 seconds 7. Process Overhead spray ring for post-rinsing after process 6 Rinsing with ambient temperature in this process, time = 1 minute, draining time = 60 seconds 8. Process Passivation, no-rinse for aluminum Rinsing with ambient temperature in this chamber, time = 2-3 minutes, draining time = 1-2 minutes 1.1 Reverse Osmosis System Reverse osmosis system 250 liters/hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100”. Design: The spray system is in 2 parts and is movable, and is moved up to 500 mm via a pneumatic sliding system. The return feed to the tanks is also movable via a pneumatic sliding system with 7 positions, designed to serve the 7 tanks. 2. Walk-in coating booth 1 Booth dimension Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Booth dimension incl. extraction system Length 8,552 mm Hedjffv Tpjpfx Airow Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the entry/exit of workpieces, and an additional side door for the coating operator. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 2,200 mm 3 Internal dimension Height 3,416 mm 5. Dryer 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 1,200 mm 3 Internal dimension Height 3,416 mm 6. Manual conveying system The conveying system consists of: The conveying system is designed for a crossbar weight of 700 kg, the trolley carries a maximum of 2,000 kg on 3 rails.

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times Hodpfxohfv D Se Airew possibility of manufacturing machines in custom configurations and dimensions

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, This degreasing system operates under vacuum (pressure swing process) with modified alcohol or hydrocarbon. (New system) 12-month warranty Immediately available from St. Gallen With vacuum pressure swing process Hedeqy H H Dopfx Airjw System process: spray, immersion, ultrasonic, and steam degreasing including vacuum drying. Specifications: Ultrasonic 2*1000 W - 25 kHz Double fine filter Chamber door in bulletproof glass 2-tank system, capacity 400L Double distillation and residual distillation Automatic oil discharge 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 wash baskets, mesh size 7mm and 12mm 12" touch panel Prepared for automatic loading Maximum basket size (480 x 320 x 200 mm) Maximum load weight 100 kg System dimensions 2400 x 2400 x 3300 mm System weight (basic version) 2500 kg Color RAL 9003 (white) RAL 7021 (black)

Condition: new, Year of construction: 2026, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, rear outlet. Superstructure: Water tank roll-off container, approx. 12,000 liters. ARCHIVE IMAGES: Water tank without platform, approx. 12,000 liters – according to DIN 30722-1. - Internal dimensions (length x width x height): 5500x2394x1003 mm - Overall dimensions (length x width x height): 6,081mm x 2,394mm x 1,743mm Hjdpfjzr Rl Sjx Airew - Material quality: S235 (St-37) - Bottom plate / wall plates: Smooth bottom plate, 5mm thick, sides 3mm, roof and rear wall 4mm - At the rear, bottom: 2x Storz A couplings with ball valve (4 inches) - At the rear, top: one Storz B coupling with elbow and cover (2 inches) - At the front, top on the hook: one Storz B coupling with elbow, coupling, and cover (2 inches) - Galvanized and screwed-in ladder on the front wall, pipe for venting (with ball valve for closing) - Frame made of INP180 - On the roof: manhole, diameter 600 mm - Inside: 3 baffle plates, diameter 600 mm (large cavities) - Waterproof (tested for watertightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm thick, externally primed with epoxy resin lacquer, 60 µm thick, and painted with 2K lacquer (polyurethane lacquer B7), 40 µm thick, in RAL color 3000 (red). With UVV sticker (DGUV), checklist (safety instructions), and warning marking – waterproof (tested for watertightness). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2026, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, rear outlet. Superstructure: Water tank roll-off container, approx. 12,000 liters. ARCHIVE IMAGES: Water tank without platform, approx. 12,000 liters – according to DIN 30722-1. - Internal dimensions (length x width x height): 5500x2394x1003 mm - Overall dimensions (length x width x height): 6,081mm x 2,394mm x 1,743mm - Material quality: S235 (St-37) Hsdjzr Rmcepfx Airow - Bottom plate / wall plates: Smooth bottom plate, 5mm thick, sides 3mm, roof and rear wall 4mm - At the rear, bottom: 2x Storz A couplings with ball valve (4 inches) - At the rear, top: one Storz B coupling with elbow and cover (2 inches) - At the front, top on the hook: one Storz B coupling with elbow, coupling, and cover (2 inches) - Galvanized and screwed-in ladder on the front wall, pipe for venting (with ball valve for closing) - Frame made of INP180 - On the roof: manhole, diameter 600 mm - Inside: 3 baffle plates, diameter 600 mm (large cavities) - Waterproof (tested for watertightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm thick, externally primed with epoxy resin lacquer, 60 µm thick, and painted with 2K lacquer (polyurethane lacquer B7), 40 µm thick, in RAL color 3000 (red). With UVV sticker (DGUV), checklist (safety instructions), and warning marking – waterproof (tested for watertightness). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Year of construction: 2025, condition: as good as new (ex-display), The "RH S" spray cleaning system is a compact, space-saving, automatically operated cleaning system that meets high standards regarding cleaning, degreasing, and drying results. The parts can be cleaned with the goods basket in a stationary, pivoting/oscillating, or rotating position. The nozzle system – several nozzle bars on the long sides and end faces – is permanently mounted in the processing chamber. Basket dimensions: L x W x H 470 x 320 x 200 (h) mm 2 baskets can be washed in parallel (simultaneously) Maximum load weight: 100 kg Spray pressure (washing): 4 bar, circulation rate: 360 liters/min. Control system: Siemens S7-1200 with KTP700 touch panel Includes hot air drying (12 kW) Includes compressed air impulse blow-off Includes steam extraction Hjdpfx Aijgrm Dforow Includes external cladding made of stainless steel Includes preparation for retrofitting an oil separator Includes bag filter for media maintenance Includes 2 stainless steel goods baskets 470 x 320 x 200h mm System dimensions: L x W x H 1,425 x 1,920 x 1,980 (h) mm Dimensions including the open loading door Connection value (electrical): approx. 25 kW

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). The process can be manual or fully automated Hedpjwdgi Hsfx Airow as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment).

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 700 kg, temperature: 220 °C, heating capacity: 150 kW (203.94 HP), workpiece height (max.): 2,500 mm, workpiece length (max.): 6,000 mm, Equipment: lighting, Complete powder coating system including pre-treatment, curing oven, conveying system, and assembly For sale is a powerful, well-designed, and fully coordinated complete powder coating system for highly professional coating processes. The system covers the entire manufacturing process – from thorough surface preparation (3 zones) to precise powder application and reliable thermal curing. (Note: A customized design of the system according to customer requirements is possible upon request!) Key data & technical specifications: - Machine type: Powder coating system / complete system - Condition: New machine - System components: - Combined booth for manual/automatic pre-treatment - Walk-in powder coating booth - Powder curing oven - Manual conveying system - Powder gun - Electrical control system including installation - Usable dimensions (oven / booths): Component dimensions up to L x W x H: approx. 6,000 x 1,500 x 2,000 mm - Oven power / connection value: Design depending on the type of heating (gas / electric) and dimensioning (e.g. approx. 80–150 kW electric or a correspondingly designed gas burner) - Scope of supply: Complete system including on-site assembly Detailed overview of the included system components: 1. Combined pre-treatment booth: - Designed for both manual and automatic pre-treatment steps. Ensures optimal cleaning, degreasing, and application of a primer to the workpieces as a basis for durable coating results. 2. Walk-in powder coating booth: - Ergonomically designed, walk-in booth structure for maximum freedom of movement during coating. Enables efficient powder recovery, quick color changes, and a clean working environment. 3. High-performance powder curing oven: - Uniform heat distribution for homogeneous curing of the powder coatings. Designed for high energy efficiency and stable process temperatures. 4. Manual conveying system: - Robust and flexibly usable transport system for the safe flow of materials between pre-treatment, coating, and curing oven. 5. Ergonomic powder gun: - Modern application technology for uniform powder application, high transfer rates, and first-class surface quality. 6. Central control & electrical system: - Complete electrical control system including wiring, control cabinet, and complete on-site installation, ready for operation. Flexibility & Customization Every manufacturing operation has specific requirements for space, component sizes, and throughput. All components and dimensions of this system can be flexibly adapted to your individual operational conditions and customer requirements. Please do not hesitate to contact us to discuss special dimensions, modified conveying systems, or extended levels of automation. Hedpjbhh Awsfx Airew

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Hedpsfz Dtzjfx Airjw

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. Hodsg Ipp Ajpfx Airow You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, TECHNICAL DETAILS - Media : A3 type - Installed power : 8 [kW] - Media volume : 80 liters - Basket dimensions : 300 x 200 x 150 [mm] - Cooling : water - Tank 1 : washing with serial filtration - Tank 2 : rinsing with serial filtration - 1 washing tank : 300 x 200 x 150 [mm] - Continuous distillation : 25 [l/hour] - Size (W x L x H) :1200 x 1800 x 1500 [mm] Hedpeug U Skefx Airow EQUIPMENT - Loading system : manual - Ultrasounds : yes - Vapour degreasing : yes - Vacuum drying : yes - Cooling unit HITEMA ECA.008

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today! Hedpeun Sd Uofx Airjw

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Hjdpfx Asfz Aw Heirow The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: used, TECHNICAL DETAILS - Media : A3 type - Installed power : 8 [kW] - Media volume : 80 liters - Basket dimensions : 300 x 200 x 150 [mm] - Cooling : water Hedpfx Aioug U R Hjrow - Tank 1 : washing with serial filtration - Tank 2 : rinsing with serial filtration - 1 washing tank : 300 x 200 x 150 [mm] - Continuous distillation : 25 [l/hour] - Size (W x L x H) : 1200 x 1800 x 1500 [mm] EQUIPMENT - Loading system : manual - Ultrasounds : yes - Vapour degreasing : yes - Vacuum drying : yes - Cooling unit HITEMA ECA.008

Condition: new, Year of construction: 2025, color: grey, empty load weight: 860 kg, loading space volume: 10 m³, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel structure Structure: Tipper container approx. 10m³ asymmetrical/open Tipper container 10 cbm open asymmetrical - old DIN Material quality: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipper bearing: triple tipping bearing on one side - with warning markings - UVV sticker - container tested and approved according to UVV - Net or tarpaulin hooks all around - 4x mounting bolts Hodpfx Aox Ni N Toirew - Mounting bolts and tipping bearing ST 52 - Corners reinforced inside and outside Container fully welded, degreased, blasted, primed inside and outside with alkyd base paint 40 µm and painted outside with alkyd resin paint 40 µm in RAL7016 anthracite gray ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors excepted! - .

Condition: new, Year of construction: 2025, color: red, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel construction, rear outlet Body: Water tank roll-off container, approx. 12,700 liters. Roll-off container/water tank approx. 6,000 to 13,000 liters. The volume of the tank shown is approx. 12,700 liters. - Clear internal dimensions L x W x H: 5400x2400x1200 mm (tank 4600mm, platform 800mm) - Material grade: S235 (St-37) - Bottom plate / wall plates: Smooth bottom plate, thickness 5mm, sides 3mm - Forklift pockets on the bottom of the container - Rollers, greaseable - Ventilation with lid/access at the top - C-connection with flap at the top - A-connection with ball valve at the rear - Epoxy coating inside, 50 microns - Primed and painted outside, 40 microns - 2 internal bulkheads - Ladder on the front wall, right side - Additionally, a C-connection with ball valve at the front on the front wall, bottom left The container is fully welded, degreased, blasted, primed inside with epoxy coating 50 µm, primed outside with alkyd primer 40 µm and painted with alkyd resin paint 40 µm in RAL color of your choice. Delivery time: approx. 20-22 weeks Available from 6,000 to 13,000 liters. Price depending on the number of liters between EUR 9,900.00 and approx. EUR 14,000.00 per liter/volume. Available with self-priming water pump, self-lubricating with separate motor, flow rate: 129 m³/hour, 2000 l/min, pump height: 17m, grain size: 28mm, fuel: diesel, tank: 4.3 liters, see 2907, additional cost approx. EUR 4,000! Hedolu Hruopfx Airow Available as a roll-off container as well as a tank. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, color: grey, overall weight: 10,000 kg, loading space volume: 10 m³, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body Body: approximately 10m³ open, asymmetric roll-off container - old DIN standard Material grade: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipping bearings: triple-sided, single-sided tipping bearings - with warning markings - UVV sticker – container inspected and approved according to accident prevention regulations (UVV) - Continuous net or tarpaulin hooks Hjdpfx Aievhi Afsrow - 4x mounting bolts - Mounting bolts and tipping bearings made from ST 52 - Corners reinforced inside and outside Container fully welded, degreased, shot-blasted, primed inside and outside with 40 µm alkyd primer, and painted outside with 40 µm alkyd resin paint in RAL7016 anthracite grey Price per unit! ACCESSORY SPECIFICATIONS WITHOUT WARRANTY, subject to change, prior sale, and errors! -

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5m³, ARCHIVE IMAGES - Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions LxWxH: 4500x2300x500 mm Material quality: S235 Floor / wall thickness: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear variant: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Free-standing hook Incl. warning markings, UVV badge (DGUV), checklist (safety instructions) Hsdjx E Tg Uepfx Airow All containers are welded, degreased, shot-blasted, primed inside and out with 60 μm alkyd primer, and outside painted with 40 μm alkyd resin paint in RAL 7016. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Hodex H Tv Sspfx Airsw Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Hodpfx Aex E Thfjirsw Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Hedpex H Tv Eofx Airsw Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Hodpfxjfz I N To Airjw materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: new, color: grey, overall weight: 10,000 kg, maximum load weight: 9,290 kg, empty load weight: 710 kg, loading space volume: 7 m³, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body Hodpevhiz Uefx Airjw Body: skip container approx. 7 m³ asymmetric/open, skip container 7 cbm open asymmetric - old DIN Material quality: SJ235 (ST37-2) Floor plate / side plates: 6 / 4 mm Tipping bearings: triple, one-sided tipping bearing - with warning markings - UVV inspection label – Container tested and approved according to UVV - Continuous net or tarpaulin hooks - 4x mounting pins - Mounting pins and tipping bearings ST 52 - Corners reinforced inside and outside Container fully welded, degreased, shot-blasted, primed inside and outside with 40 µm alkyd primer, and finished externally with 40 µm alkyd resin paint in RAL7016 anthracite grey Price per unit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch Hsdpju R Urhofx Airsw - Safety rating: IP 54 - Declaration of conformity: CE