Used Demag D 150 452 Art 631 for sale (566)

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Bdsdpfoyzylvsx Andoi Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Bjdpfoz Dhnrjx Andodi Plug combination for electrical connection

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT133-997, DEMAG KBK crane canopy crane runway with dimensions approx. 4x6m (6m bridge) Payload / lifting capacity 250 KG - 0.25to Technical data of the system: Crane runway made of Demag KBK2 rails System is supplied complete: Bjdpjty Sxqofx Andjdi KBK rails, rail joiners, trolleys, end plates, cable carrier, brackets/hangers etc. incl. steel 250KG chain hoist - lifting height approx. 5m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 1990, condition: used, machine/vehicle number: 001435U, For Sale Bdedpsnk Uyaefx Andoi 1x Used single-girder overhead crane 20.245mm x 2x 3.200 kg.

Condition: like new (used), Ident No. 87481044 SED2Z Bdedpozc H Hnjfx Andsi Application: Keyboard Width: 86 mm Height: 67 mm Depth: 63 mm Weight: 252 g Condition: Like new

Condition: used, Two used Demag injection molding machines are for sale. Attached are the requested photos of our used 280-ton and 650-ton Demag machines, robot, conveyor belt, and enclosure. The machines are still in use in ongoing production and can be inspected while in operation. The costs and organization for dismantling, transporting the machines out of the hall to the truck, loading, and transporting them to your location will be borne by the buyer. The used 650-ton machine, robot, conveyor belt, and enclosure. The used 280-ton machine, robot, conveyor belt, and enclosure. Bdsdpsz Sl Eajfx Andei

Condition: excellent (used), Year of construction: 2008, DEMAG SYSTEM 800/1120-9500 injection molding machine + DEMAG ERGOTECH DR743 robot Year of manufacture: 2008 | Clamping force: 800 tons | Demag Ergotech DR743 linear robot Hydraulic Demag System 800/1120-9500 injection molding machine from 2008, equipped with an integrated Demag Ergotech DR743 linear robot for automatic part removal. TECHNICAL SPECIFICATIONS 1. BASIC DATA Manufacturer: Demag Model: System 800/1120-9500 Year of manufacture: 2008 Machine type: hydraulic injection molding machine for processing thermoplastic materials Clamping force: 8000 kN (800 tons) Injection unit: 9500 Equipment: integrated Demag Ergotech DR743 linear robot 2. CLAMPING UNIT Clamping force: 8000 kN (800 tons) Dimensions of mounting plates: 1620 × 1500 mm Column spacing: 1120 × 1000 mm Minimum mold height: 500 mm Maximum mold height: 1050 mm Maximum distance between plates: 2080 mm Mold opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mold weight: 7200 kg 3. INJECTION UNIT Injection unit type: 9500 Bsdpfx Anj Af Nhfjdodi Screw diameter: 130 mm Injection volume: 7300 cm³ Injection weight (PS): 6640 g Injection pressure: 1300 bar Screw length-to-diameter ratio (L/D): 20:1 4. DEMAG ERGOTECH DR743 LINEAR ROBOT Identification data Manufacturer: Demag Ergotech Model: DR743 Type: DR743-42141000 Year of manufacture: 2008 Serial number: W743-0277 Robot type: linear, designed for automatic part removal Integration with injection molding machine: yes Robot travel ranges X-axis: 1200 mm Y-axis: 2600 mm Z-axis: 3000 mm Electrical and mechanical parameters Supply voltage: 400 V Rated current: 18 A Connected power: 12.5 kVA Robot weight: 750 kg 5. HYDRAULIC AND ELECTRICAL SYSTEM Pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1300 l 6. MACHINE DIMENSIONS AND WEIGHT Length: 12,300 mm Width: 2700 mm Height: 2700 mm Main unit weight: 33,500 kg Accessory weight: 9700 kg Total weight of main unit and accessories: 43,200 kg

Year of construction: 1977, condition: good (used), machine/vehicle number: TH2001/180, DEMAG KBK crane canopy crane runway with dimensions approx. 3x7m (7m bridge) This crane is available several times ! Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Bedpfxevdmnds Andjdi incl. 500Kg steel chain hoist - lifting height approx. 3.5m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: good (used), Year of construction: 1996, Motor for light-duty overhead cranes. Hook travel: 3 m Load capacity: 0.4 t Width: approx. 500 mm Height: approx. 300 mm Depth: approx. 300 mm Weight: approx. 25 kg Condition: good, second-hand Bdsdpfxsy Urlns Andoi

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Bjdsng H T Uepfx Andjdi Dispatch by forwarding agent or pick-up only by appointment

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3m UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Bdedsrhzh Sspfx Andsi Weight completely approx. 350KG with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: good (used), functionality: fully functional, 3 DEMAG single-rail traveling hoists, complete, all identical in design with DEMAG hoisting unit, type DH316 H12 with hoisting motor KBH140 B2/12 Gear ratio i=85 Hook travel 6m Main lifting speed 6.3 m/min Fine lifting speed 1 m/min Load capacity 6.3 tons Reeving 4/1 very good used condition, price per unit 3 units for €13,900.00 net numerous hoisting units in stock Bdodpfx Ajv Uvu Uendoi Info: we have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Also, check out my other offers from my stock!

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Hoist unit EZ DR20 Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Bodpsw H S Avefx Andodi Modifications can be offered separately.

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card Bsdsn Hbckjpfx Andjdi -Manufacturer: Bachmann, control electronic modules from injection molding machine Demag D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Bdjdpfoy T Hy Djx Andji Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Condition: good (used), Year of construction: 2005, functionality: fully functional, Robot Demag W710 axis) (Wittmann) Number of axis: 3 X- 600 mm Y- 800 mm Bdjdpfx Aexp Nu Tsndei Z- 1500 mm

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: Bedpfx Ajty Swyondodi 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Bdodpety Swtefx Andji Payload at full radius 125KG / 0.125to payload Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: excellent (used), Year of construction: 2001, 1,0 used injection molding machine with robot, safety fence, and conveyor belt. Manufacturer: DEMAG Type: ERGOTECH100/420-430System Year of manufacture: 2001 Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Screw diameter: 35 mm Maximum injection volume: 168 cm³ Injection part weight: 150 g/shot Control system: NC4 Equipment: - Robot, Wittmann, Type: W711-0174, Year of manufacture: 2009 - Safety fence - Conveyor belt - 2 x core pull - Blow valve Bsdpfe Afbx Tjx Andjdi - Highly wear-resistant bimetallic screw - Dual-pump technology for parallel movements

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ZBA112 A4 / A70D, power: 4 kW (5.44 HP), rotational speed (max.): 1,440 rpm, Demag motor ZBA112 A-4 Gearbox A70D H-1-44.1) 4 units in stock Condition: Used, in very good condition. ED=100% 4.0 kW 1440 rpm Brake 47.0 Nm B140 400V 50Hz Bedpeywi Edjfx Andodi Price on request

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Bedpfxoxup T Hs Andjdi Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: 1x Shaft-coupling-KMK set 1x Stand set KMK / P = 12600633 Bdsdpfx Aozinw Tendoi 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 1x Chain guide set LDKUN D5 = 83628033 1x Small parts set KMK 71 B2 = 12878533 Weight 11.5 kg G

Condition: like new (used), Year of construction: 2004, machine/vehicle number: 41572121, Demag new/unused wire rope hoist. Despite the 2004 year of manufacture, this unit is still new and unused. Type: Demag DH520 H52 KV1 – 4/2-2 F10 Lifting capacity: 4000 kg Hook path: 30.20 m Hoisting cable: ø 11 mm Lifting speed high: 6.3 m/min Bdsdow Sktkepfx Andoi Lifting speed low: 0.6 m/min Power: 3.6 kW Fine lifting: FG08 i = 10.00 Lifting motor: KBH 112 B4 Small lifting motor: KBA 71 B4

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm • Control system: NC5 / CDIAS • PLC operating hours: approx. 61,679 h • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million • incl. Geiger MiniServo 1.5 parts removal device Bedpfx Ano Aggpaededi In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Bedpfx Ansv Uvn Iodjdi Good condition Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse