Used Dieless Cutting for sale (13,950)

Condition: excellent (used), REMS Cut 110-75-50 Kdedpfx Asy Rt Icoc Nel

Condition: new, functionality: fully functional, Year of construction: 2026, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Kodpfx Aeikivfsc Nedl Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2007, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of manufacture: 2007 Kjdpfxeuv Hkgj Ac Njdl CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Filter system: Donaldson Torit DCE 19526ä

Condition: used, Year of construction: 1995, CNC portal flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Kedpfx Acsyay Dhj Nsdl Track width: 7,000 mm 8 x oxy-fuel torch, type ALFA 8 x Omnilift 200 Without track Without table Without filter 19526ä

Condition: used, Year of construction: 2016, MURAT NR 242 - Profile Machining Center ¬ All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. The two machining stations for profiles with reinforcement steel increases production capacity. ¬ Stacking of 10 profiles (max. 6,5 m length). ¬ Manual barcode labeling system integrated with single-lines. ¬ Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. ¬ Drain slot routing, drilling and routing at variable angles. ¬ Automatic screwing of reinforcement steels. ¬ Drilling of fixation, triple handle and hinge holes together with the reinforcement steel. ¬ Automatic conveyor belt system to transport scrap profiles to waste container. ¬ Waste profiles longer than 1,000 mm. can be re-processed. ¬ 17” touchscreen enables easy access and control. ¬ High performance Workstation PC with Intel® Core™ i5 3,1 Ghz microprocessor. ¬ All error messages can be monitored from the screen by the software developed by Murat Machinery Software Department. ¬ By online connection to the entire system, remote detection of malfunctions and maintenance is available. ¬ Data transfer is available via network connection or USB interface. ¬ Full integration with various window and door production software. ¬ Central lubrication system eases maintenance. Technical Features: Power supply: 400 V, 3ph, 50-60 Hz Power output: 30 kW, 80A Sawblade diameter: Æ 500 mm. Max. profile height: 140 mm. Min. profile height: 45 mm. Max. profile width: 130 mm. Min. profile width: 40 mm. Max. raw profile length: 6,500 mm. Max. profile processing length: 3,500 mm. Min. profile processing length: 400 mm. Air pressure: 6-8 bar Air consumption: 1200 l/min. Machine height: 2,350 mm. Kdedpfx Asy Su Exjc Nol Machine length: 18,000 mm. Machine width: 10,500 mm. Machine weight: 10,800 kg.

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar Kdsdpfjy R Dkzex Ac Njl - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: new, Year of construction: 2026, Working width: 600 mm Kedpfx Aehwrp Rsc Nsdl Working height: 220 mm minimum workpiece length: 250 mm aggregates: 4 1. saw-cutting aggregate Random System: saw-cutting optics 2. brush : metal, diameter 220mm 3. brush : Tynex grit 60, diameter 220mm 4th brush : Tynex grain 120, diameter 220mm Height adjustment: hand wheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power saw-roughening gate: 1,1 kW Motor power brushes: 4 kW Motor power feed: 0,37 kW Machine length: 2800mm machine width: 1500mm Machine height: 1600mm Weight: 1500kg

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Kedpfxerzakme Ac Njdl Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Year of construction: 2023, condition: new, Cut to length machines FORSTNER COMPACT functions: - straightening (rolls diameters 70 mm) - slitting (max 7 slitting knives) Kdedpfx Acjiy N I Io Njl - cutting (guillotine or roller shear) Available coil width - 1250 or 1500 mm

Condition: used, cutting width 330 mm Kdodpfx Aey Tpqljc Njl Cutting height 135 mm Motor output 2,2 kW The Graule type ZS 135 cross-cut saw is a pivoting cross-cut saw for cutting to length and mitre cuts.

Condition: used, Year of construction: 2007, Cutting height 175 mm cutting width 750 mm Motor output 5,5 kW saw-blade dia. 550 mm Weinig OptiCut C700 under-table cross-cut saw for safe and precise cross-cutting of solid wood, especially hard and heavy timber with large cross-sections. The machine works with a pneumatically guided saw unit, two-hand control and hold-down device and is ideal for sawmills, timber construction and industrial solid wood processing. Kdjdpfx Asy Tpqfoc Nsl

Condition: used, Year of construction: 2016, Automatic cutting table system for textiles and leather Manufacturer: Atom Type: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Kdodpfsyf Egxox Ac Nel Cutting area: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum power: 1 – 8 kW Connected load: 5.5 kW 380 volts, 3 phases, 50 Hz Compressed air: 6 bar, 200 l/min when using pneumatic tool holder 9 bar, 400 l/min 2 independently operating multi-tool heads consisting of: Tool module for all tool holders Writing nib for applying markings 2 punch nozzles with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm one needle Circulating conveyor belt (transports the material into the working areas) Vacuum table: divided into squares of 300 x 300 mm High-performance vacuum turbine with frequency control up to 1 – 8 kW High-brightness projector Servo drive for the X, Y and Z axes Safety device with light curtain monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Weight: 1,630 kg 19526

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) with oxy-fuel torch Manufacturer: Zinser Type: 2425-I/3600 Year of construction: 2017 CNC control: 5010 Travel length: 11 m Kdjdpfx Aow Rpvbsc Nol Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatic rotating plasma beveling unit Bevel System 2015/350 Filter system Downflow 3DFP9-SP Power: 9 kW Laser diode 19526ä

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Kdjdpfx Acey Auxmj Nsl Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control ä19526

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x Plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter system, outdoor installation 1 x Nesting program on the machine control system Availability: immediate Kodoytqmmjpfx Ac Njdl 19526

Condition: used, Year of construction: 2005, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Kdjdpfx Aoykruajc Nsl Equipment: 1 x Oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x Skew rotator with Kjellberg FineFocus 800 power source 3 x Oxy-fuel torches ALFA 1 x Marking unit FineMarker Without table, filter, and guide rail ä19526

Condition: used, Year of construction: 2006, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Working area: 3 x 12 m Kodpfeykpd Eox Ac Nedl Track width: 4,000 mm Track length: 15 m Extraction table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system ä19526

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm Kdedpfoy Rthpsx Ac Nel - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Kedpfxjyay H Ao Ac Nsdl Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle, 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä19526 Availability: May 2026

Condition: used, Year of construction: 2019, CNC gantry plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m “MasterCut” plasma rotator with fully automatic support for weld preparation Kjdpfxoxnmbnj Ac Nedl 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filter system ä19526

Condition: good (used), Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL PAA 9001.25 Kjdpsu U Hm Ajfx Ac Nodl Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 Plasma torch with Kjellberg HiFocus 280i power source 2 Oxy-fuel torches, propane Oscillating conveying table, Beuting Filter system, Donaldson DFPRO12, for outdoor installation 19526

Condition: good (used), Year of construction: 2008, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC Control: Global Control Plus Year of Construction: 2008 Retrofit: 2019 Kjdpfx Acsiff Daj Njdl Extraction Table: 2,000 x 3,000 mm 1 Oxyfuel Torch ALFA 1 Plasma Torch Power Source: Kjellberg HiFocus 280i Filtration System: Z-Line 9 ZDC We have our own technicians for assembly, commissioning, and training! All spare parts are in stock. 19526

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Kodox Eh Drepfx Ac Nedl Laser operating hours approx.: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet metal thickness, steel (max.): 15 mm Sheet metal thickness, stainless steel (max.): 8 mm Sheet metal thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left and right): outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 x 3,610 mm 19526

Condition: used, Year of construction: 2006, CNC portal-type flame cutting machine Manufacturer: Bach Kodpfx Aew El Udjc Nodl Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Working table: 1.5 x 6 m 2 oxy-fuel torches 19526

Condition: good (used), Year of construction: 2011, CNC Portal Flame Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Manufacture: 2011 CNC Control: iMSNC with integrated network card Working Area: 2,000 x 9,000 mm Extraction Table 1 Oxy-fuel torch Cutting thickness up to 150 mm 1 Plasma marking unit Kjellberg Laser pointer Technical Data in Detail: 1x Oxy-fuel torch (1 x fully automatic) 1x Plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the portal Laser pointer with automatic offset transfer Parameter database iMSNC control / Windows® Programming system "AsperWin-Basic" for programming directly on the machine control Module Macro library "AsperWin Select" Module NC simulator "AsperWin NC-Sim" Kdjdeudn Rzepfx Ac Nel Module "Plasma Marking" (for peening) via plasma source Module "THC" / Automatic height control via arc voltage USB2.0 connection for storage media Module Remote diagnostics MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Power cables Gas hoses for preheating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 capacitive height control IHT / for oxy-fuel 1 electric ignition unit RHÖNA-Acetylene Double-sided cable protection (collision protection) of the portal bridge via emergency stop Kjellberg® Plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® Plasma marking system FineMarker CNC interface for FineMarker / connection to the CNC control Module for the automatic control of the marking device 19526