Used Dmg Ctx 310 Eco for sale (409)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
DMG
Listing
Hungary
6,946 km
DMG DECKEL MAHO DMC 635V
DMG DECKEL MAHODMC 635V
Call
Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,478 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine.
• Operating hours: 19,478 h
• Table size: 790 x 560 mm
Kwjdpsyca Npsfx Adwst
• Rapid traverse: 30 m/min
• Tool changer: 20 positions
• Condition: Both machines are in good working condition
Technical Specification
Taper Size SK 40
Listing
Hungary
6,946 km
DMG DECKEL MAHO DMC 635V
DMG DECKEL MAHODMC 635V
Call
Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information.
Kjdpfx Adsyca I Sewowt
• Operating hours: 17,641 h
• Table size: 790 x 560 mm
• Rapid traverse: 30 m/min
• Tool changer: 20 positions
• Condition: Both machines are in good working condition
Technical Specification
Taper Size SK 40
Listing
Friesenheim
6,938 km
Vertical machining center
DMG MORIDMU 65 Monoblock
Call
Condition: excellent (used), Year of construction: 2015, operating hours: 7,110 h, functionality: fully functional, DMG DMU 65 Monoblock 5-Axis Machining Centre (2015)
Manufacturer: DMG
Model: DMU 65 Monoblock
Year of manufacture: 2015
Condition: Used, very good, still in production.
Power-on hours: 21,336 h
Spindle hours: 7,112 h
Kwedpfx Adjx Iwb Iowet
Control: Heidenhain iTNC 530
X-axis: 735 mm
Y-axis: 650 mm
Z-axis: 560 mm
Tool holder: SK40
Spindle speed: 10,000 rpm
Chip conveyor
Internal coolant supply (IKZ) 40 bar
Band filter system
3D probe
Documentation
Additional accessories optional.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Langenfeld
7,006 km
Milling machining centers - universal
DMGDMC60 T
Call
Condition: used, Year of construction: 2005, x-travel 780 mm
y-travel 560 mm
z-travel 560 mm
total power requirement --- kW
weight of the machine ca. 12,0 t
dimensions of the machine ca. --- m
Kwjdpfjyb S Ibjx Adwot
Listing
Poland
6,946 km
DMG CLX 450 V6
DMGCLX 450 V6
Call
Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,047 h, spindle speed (max.): 4,000 rpm, spindle motor power: 25,500 W, controller manufacturer: SIEMENS, controller model: 840D SL with ShopTurn, number of axes: 3, This 3-axis DMG CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control, a main spindle with a maximum speed of 4000 rpm, and a counter-spindle reaching 5000 rpm. The machine includes a 12-position servo turret with driven tool stations and a Y-axis stroke of ±60 mm. If you are looking to get high-quality turning capabilities, consider the DMG CLX 450 V6 machine we have for sale. Contact us for more information.
• General configuration: CNC turning center with X, Z, C axes; Y-axis ±60 mm; counter-spindle; driven tools
• Operator panel: DMG MORI SLIMline multi-touch, 19″
• Control: Siemens 840D SL with ShopTurn
• Main spindle: A2-8"; 17/25.5 kW (100%/40% DC); max 4000 rpm; through-spindle clamping; max bar capacity Ø 80 mm
• Counter-spindle: A2-6"; built-in motor spindle ISM 52; 13/14 kW (100%/40% DC); max 5000 rpm; non-through clamping
• Tool turret: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); capability to mount 6 BT holders on turret periphery; TRIFIX precision coupling
• Measuring systems: Direct measuring systems on X, Y, Z (Z with air-purge option)
• Axes and performance: Y-axis stroke ±60 mm; C-axis on both spindles; high-precision 45 mm linear roller guides; increased rigidity for heavy-duty turning
Additional equipment
• Chip conveyor (chip discharge to the right)
• Coolant gun, 5 bar
• Optional high-pressure coolant system
• Optional oil mist extractor AFS 600, 600 m³/h, H13 filtration class
• Manual tool measuring probe (MARPOSS)
• Optional direct measurement system for Z-axis with purge
• Y-Axis Parting Cycle option (V4/V6)
• Pressure-differential clamping for main spindle
• External chuck flushing (main and counter-spindle)
Kwjdex E D Uvopfx Adwst
• 4-colour signal tower
• Setup package included (C-P7223F)
Listing
Germany
6,946 km
DMG Lasertec 40
DMGLasertec 40
Call
Condition: ready for operation (used), Year of construction: 2009, total height: 2,370 mm, overall weight: 2,500 kg, product length (max.): 2,850 mm, This 4-axis DMG Lasertec 40 laser engraving machine was manufactured in 2009. It features a picosecond laser with an average power of 6W and a wavelength of 1064 nm. The machine offers a travel range of X=400 mm, Y=300 mm, and Z=500 mm, with maximum feed rates of 15 m/min for X and Y axes and 12 m/min for the Z axis. Consider the opportunity to buy this DMG Lasertec 40 laser engraving machine. Contact us for more information.
• Machine footprint (incl. operation/maintenance with extraction): Depth 3.5 m, Width 3.0 m, Height 2.5 m
• Weight with X-Y table: approx. 2,500 kg
• Machine power consumption (with laser and cooling unit): 16 kVA
Kodpfx Adoya Ah Aewswt
• Fuse: 40 A at 400 V
• Operating voltage: 3/N/PE/400 V/230 V 50 Hz
• Maximum permissible deviation: ±10%
• Control voltage: 24 V DC
• Permissible ambient temperature: +15°C to +35°C
• Permissible relative humidity: max. 75% at 20°C
• Travel range (with X-Y table): X = 400 mm (longitudinal), Y = 300 mm (transverse), Z = 500 mm (vertical)
• Table size: 400 x 300 mm
• Feed drive: Digitally controlled AC motor and ball screw in each linear axis
• Maximum feed rate: X/Y: 15 m/min; Z: 12 m/min
• Guides: Ball screw guides in all linear axes
• Measuring systems: X, Y, Z indirect linear encoder
• Machine accuracy: P = 0.010 mm (VDI/DGQ 3441)
• Laser type: Picosecond laser
• Average laser power: 6 W
• Wavelength: 1064 nm
• Scanner: Planar field lens; focal length 163 mm; field size 65 x 65 mm
• Lubrication: Manual central lubrication
• Electrical control cabinet: with cooling unit (integrated into the machine)
• Cabin: Fully enclosed cabin including roof; laser safety screen (optionally multiple); optimal operator access
Listing
Budapest
6,092 km
Vertical machining center
DMG MoriMilltap 700
Call
Condition: excellent (used), operating hours: 4,920 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Siemens, controller model: 840D SL, table load: 300 kg, spindle speed (max.): 18,000 rpm, spindle nose: BBT Big+, number of slots in tool magazine: 25, Equipment: documentation/manual, DMG Mori Milltap 700 machine for sale, in new condition.
Siemens 840 D SL control. We bought the machines because of the small space requirement, 18,000 spindle, fast tool change and 60 meter rapid traverse. The machine can be viewed and tested under power. We can help with packaging and loading onto a truck.
Kjdpsxghpwsfx Adwjwt
2x automatic door for robots. 40 bar Internal cooling, filter system. Prepared for 4 and 5 axis (Lehman). Heidenhain linear scales on all axis. Renishaw measuring systems. Chip conveyor. 4 chanel hidraulic clamping system. Documentation.
Listing
Poland
6,172 km
Vertical Machining Centre
DMG DECKEL MAHODMC 64V linear
Call
Condition: ready for operation (used), Year of construction: 2007, General Data
Machine weight 7500 kg
Control Unit
Brand SIEMENS
Model SINUMERIK 810D powerline and ShopMill
Main Drive
Spindle speed range 50–12000
Tool taper SK40
Number of axis 3
Movement
X-Axis Movement 640 mm
X-Axis Rapid Traverse 70 m/min
Y-Axis Movement 600 mm
Y-Axis Rapid Traverse 40 m/min
Z-Axis Movement 500 mm
Z-Axis Rapid Traverse 40 m/min
Table
Table load 600 kg
This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2007. It features a Siemens 810D ShopMill control, SK40 spindle with speeds up to 12,000 rpm, and a tool magazine with 30 positions. The machine includes a chip conveyor, coolant gun, and a high-pressure coolant system. Ideal for precise and efficient machining. Contact us for more information about this machine.
Ksdpjx R E Izofx Adwswt
Application Types
Milling
Listing
Poland
6,946 km
DMG MORI M1 PRO
DMG MORIM1 PRO
Call
Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, total height: 2,840 mm, table load: 600 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine.
Additional equipment
• Job Shop package
• Renishaw PP40 wireless workpiece probe
• TS27R tool measurement probe
• Scraper-type chip conveyor
• Coolant tank capacity: 200 L (left side)
• Coolant pump: 20 bar internal through-spindle coolant
• Machine enclosure roof
• LED work area lighting
Machine Benefits
Technical Machine Benefits
Kjdpfx Asx D Nigsdwswt
• Table size: 850 × 650 mm
• 24-position automatic tool changer with double gripper
• Drive type: ball screw drives with ac servomotors
• Voltage: 3 × 400 v
Extra Information
The machine is in fully functional condition
Tested and confirmed by DMG service report, including accuracy measurements
Complete documentation is available
Currently disconnected from power
Dimensions
Machine Depth 3065 mm
Listing
Czech Republic
6,946 km
DMG MORI DMU 40 eVo
DMG MORIDMU 40 eVo
Call
Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 450 mm, table length: 400 mm, spindle speed (max.): 14,000 rpm, spindle motor power: 18,900 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG MORI DMU 40 eVo was manufactured in 2015, featuring a robust HEIDENHAIN iTNC 530 control system, a new spindle, and a high-pressure cooling system. It offers X, Y, Z movements of 400 mm, 400 mm, and 375 mm respectively, with a spindle speed of 14000 1/MIN and a 30-position tool magazine. Consider the opportunity to buy this DMG MORI DMU 40 eVo vertical machining centre. Contact us for more information about this machine.
• High-pressure cooling
• 01/2025: a new spindle, linear guides, hydraulic and pneumatic distribution were installed. The rotary table hydraulics were also newly sealed.
Kjdpfxsx D D Tyo Adwjwt
• Machine in very good condition!
Technical Specification
Through-spindle Coolant Yes
Taper Size SK 40
Listing
Germany
6,946 km
DMG MORI HSC 55 Linear
DMG MORIHSC 55 Linear
Call
Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,913 h, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 28,000 rpm, spindle motor power: 29,000 W, swivel angle C-axis (max.): 360 °, number of axes: 5, This DMG Mori HSC 55 linear Universal Machining Centre was manufactured in the year 2011 and has 61913 control hours, 59275 machines on hours, 10986 program run hours, and 10631 Spindle running time (spindle exchange at approx.7300 hours). The machine has a spindle speed of 20 - 28000 rpm and a capacity for 30 tools. It is equipped with a pallet changer, control is Heidenhain iTNC 530 control unit and has 5 axis.
Machine Benefits
Qualitative Machine Benefits
• The machine has capacity for 30 tools
• Pallet changer
Technical Machine Benefits
• Measuring length: 400 x 400 mm
• Axial run-out of the clamping surface Ø 350 mm
• Axial stability of the work spindle: 0,005 mm
• Spindle nose : 250 mm
• Tool holder hsk-a63 according to din69893
• Pickup tool changer 16 places (chain)
• Active cooling unit for main spindle and linear drives// active cooling unit for control cabinet
• Direct absolute measuring system incl. Sealing air
Kwjdsx D Eqgepfx Adwet
• Coolant/blast air changeover
• Z-axis extension to z = 460mm
Extra Information
Machine still under power.
Listing
Ennepetal
6,975 km
CNC turning and milling center
DMG GILDEMEISTERTWIN 102
Call
Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center
- Recorded spindle hours: 43,558
- Spindle speed range: 3,200/5,000 rpm
- Swing diameter: 270 mm
- Spindle distance: 900 mm
- X1 axis travel: 290 mm
- Z1 axis travel: 650 mm
- X2 axis travel: 180 mm
- Z2 axis travel: 650 mm
- Y1 axis travel: ±40 mm
- Z3 axis travel: 670 mm
- X3 axis travel: 175 mm
- Max. bar diameter: 100/104 mm
- Number of driven tools per tool turret: 12
- Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches
Attention, the machine has the following defects:
- The B-axis is defective (mounted on turret 1)
- Guideways and drives show age-related wear
Kwjdpfx Ajyaqgysdwet
- X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured)
- Occasionally, axis reference value setting in the control system fails
- The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit
FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.
Listing
Ennepetal
6,975 km
CNC turning and milling center
DMG GILDEMEISTERGMX 250 LINEAR
Call
Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center
- Recorded spindle hours: 39,361
- Swing diameter: 640 mm
- Counter spindle turning diameter: 400 mm
- Spindle distance: 1,500 mm
- X1 axis travel: 550 mm
- Y1 axis travel: 180 mm
- Z1 axis travel: 1,185 mm
- B1 axis travel: 240°
- X2 axis travel: 180 mm
- Z2 axis travel: 1,050 mm
- Z3 axis travel: 1,150 mm
- Spindle speed range: 3,200/4,000 rpm
- Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min
- Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min
- Rapid traverse rate, Slide 3 (Z): 36 m/min
- Tool holder: HSK 63
- Spindle speed: 12,000 rpm
- Number of tool stations in chain magazine: 40 stations
- Incl. tool holders mounted on the turret
- Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg
Note: The machine has the following defects:
- The hydraulic unit is faulty – it needs to be repaired
- The Q2 axis (milling spindle tool changer) fails frequently
- X2 axis (guideways) moves slightly askew
- The linear guides and drives show wear commensurate with age
Attention: A vehicle with 3,000 mm transport width is required for transport!
Kodoyaqczepfx Adwowt
FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.
Listing
Italy
6,946 km
DMG Mori Seiki 150 SL
DMG Mori Seiki150 SL
Call
Condition: ready for operation (used), Year of construction: 1996, controller manufacturer: FANUC, controller model: na, number of axes: 2, This DMG Mori Seiki 150 SL was manufactured in 1996. A horizontal turning machine featuring a turning diameter of 150 mm, swing over saddle of 430 mm, and distance between centers ranging from 180 to 500 mm. It comes equipped with 12 tools. Consider the opportunity to buy this DMG Mori Seiki 150 SL horizontal turning machine. Contact us for more information.
Machine Benefits
Technical Machine Benefits
• Distance between centers: 180–500 mm
Kwedpjyalmzefx Adwjt
• Turning diameter: 150 mm
• Swing over saddle: 430 mm
Extra Information
Machine still under power
Listing
Germany
6,978 km
CNC Turning- and Milling Center
DMGTWIN 500
Call
Condition: used, Year of construction: 2001, turning diameter / mm
Kwjdsx Tu Suspfx Adwst
turning length / mm
control /
total power requirement / kW
weight of the machine ca. / t
required space / m
Listing
Burgoberbach
6,740 km
Vertical machining center
DMGDMC 80 H Hi-Dyn RS4
Call
Condition: good (used), functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, total height: 2,500 mm, total length: 5,000 mm, total width: 3,500 mm, table width: 500 mm, table length: 630 mm, DMG DMC 80 H Hi-Dyn RS4
For sale is a horizontal machining center DMC 80 H hi-dyn RS4. The machine is in good condition.
Kjdpfx Ajx Uq Saodwowt
Technical Specifications
Travel distances:
X-axis: 800 mm
Y-axis: 800 mm
Z-axis: 800 mm
Table data:
Table size: approx. 630 × 500 mm
Max. workpiece weight: ~1,200–1,400 kg
Rotary table: 4th axis, 360° continuous
Spindle:
Direct drive, liquid-cooled
Speed ranges:
Automatic mode: 0–6,000 rpm
Setup mode: 0–800 rpm
Manual mode: 0–5,000 rpm
Max. speed: up to 8,000 rpm
Spindle power: approx. 20 kW
Torque: S1 – 100% duty cycle
On request, dismantling, loading, and transport within Europe can be organized for an additional charge.
Prices are subject to VAT.
Viewing is possible by appointment. Please contact us—our team will be happy to assist you.
Trade-in or exchange possible!
Machinery Purchase / Sale
PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC.
Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell?
For further information or contact options, visit our website.
Listing
Spain
6,946 km
DMG Mori Seiki NVX-5100 II
DMG Mori SeikiNVX-5100 II
Call
Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, This 4-axis DMG Mori Seiki NVX-5100 II was manufactured in 2013. It features a Fanuc control unit, a table size of 1350 x 600 mm, and a maximum table load of 1100 kg. The spindle operates at 12,000 rpm with a motor power of 15 kW. It includes a 60-tool magazine, rapid traverse speed of 30,000 mm/min, and a Daikin oil cooler. Consider the opportunity to buy this DMG Mori Seiki NVX-5100 II vertical machining centre. Contact us for more information.
Machine Benefits
Technical Machine Benefits
• Spindle speed: 12000 rpm / spindle motor power: 15 kw
• Rapid traverse speed: 30000 mm/min
• Max load on table: 1100 kg
• Dimensions: 1350 x 600 mm
Kwedpfx Asyaipyjdwst
• Tool magazine capacity: 60 tools / tool change time: 0. 5 sec / chip-to-chip time: 5 sec
• Cooling system: daikin oil cooler
• Prism guides with automatic oil lubrication / renishaw tool measurement / automatic tool collision protection / automatic force and torque control / usb/pcmcia/rs232 ports / chip extractor system
• Weight: 6400 kg
Listing
Germany
6,946 km
DMG Gildemeister Twin 65
DMGGildemeister Twin 65
Call
Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: SIEMENS, controller model: 840D Powerline, This DMG Gildemeister Twin 65 was manufactured in 2004. It features a Siemens 840D Powerline control, 2x Sauter revolver with 12x VDI 30 each, and a revolver 1 with Y-axis. It includes a parts pick-up device, belt filter system, coolant tank of 980L with 20/40 bar, and a bar loading magazine IRCO Profimat 65. Reach out for more information about this machine.
Additional equipment
• Parts pick-up device NC controlled
• Belt filter system with coolant tank 980L with 20/40 bar
• Bar loading magazine IRCO profimat 65
• Bar passage max. 65mm
• Bar length 3000mm
• Various tool holders
Machine Benefits
Kwedsyaik Repfx Adwet
Technical Machine Benefits
• 2x sauter revolver with 12x vdi 30 each
• Revolver 1 with y axis
Extra Information
Machine still under power
Listing
Slovenia
6,393 km
Vertical Machining Centre
DMG DECKEL MAHODMC 64V linear
Call
Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data
Kedox Stl Djpfx Adwswt
Machine weight 6800
Main Drive
Spindle speed range 12000
Movement
X-Axis Movement 640 mm
Y-Axis Movement 600 mm
Z-Axis Movement 500 mm
Table
Outer length 850 mm
Outer width 600 mm
This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information.
Application Types
Milling
Listing
Aflenz Land
6,381 km
CNC turning and milling center
DMG MORINLX 2500 / 700 PLUS WERKZEUGPAKET
Call
Condition: like new (used), Year of construction: 2023, operating hours: 3,751 h, functionality: fully functional, turning length: 700 mm, turning diameter: 356 mm, spindle speed (min.): 6,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, DMG MORI NLX2500/700 universal lathe with Y-axis, bar feeder, and driven tools. Main and sub spindle. Spindle bore diameter: 81 mm. INCLUDING tool package (purchase price €64,000 / see attachment).
Kwjdpfxsx Sp Izs Adwet
Listing
Burgoberbach
6,740 km
Vertical machining center
DMGDMC 100 V
Call
Condition: good (used), Year of construction: 2004, operating hours: 1,56,897 h, functionality: fully functional, machine/vehicle number: 6006285, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain TNC 426/430, workpiece weight (max.): 7 kg, table width: 800 mm, table length: 1,250 mm, table load: 1,200 kg, rotational speed (max.): 18,000 rpm, overall weight: 12,000 kg, For sale is a vertical CNC machining center, DMG DMC 100 V. The machining center is in good condition.
Vertical CNC Machining Center DMG DMC 100 V
Technical Data
Travel & Work Area
X-axis: 1,000 mm
Y-axis: 800 mm
Z-axis: 500 – 600 mm
Table
Table size: 1,250 x 800 mm
Max. table load: 1,200 kg
T-slots: e.g. 14 mm
Spindle & Performance
Max. spindle speed: 18,000 rpm
Kwjdpfxsx Tqr Ro Adwet
Alternative speeds: 8,000 – 15,000 rpm
Spindle taper: SK 40 or HSK-A 63
Spindle power: 15 kW
Operating Hours:
Control on: 156,896 hrs
Machine on: 103,327 hrs
Program run: 48,388 hrs
Spindle runtime: 46,398 hrs
Tool changer: 1,431 hrs
Tool Magazine & Change
Number of tool stations: 30 pcs.
Max. tool weight: 7 – 12 kg
Coolant supply: Internal coolant
Control & Weight
CNC control: Heidenhain TNC 426/430
Machine weight: approx. 12,000 kg
Trust Seal
Dealers certified through Machineseeker

Listing
Germany
6,946 km
DMG DMC 100 H
DMGDMC 100 H
Call
Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine.
Additional equipment
• Electronic handwheel
• Operating mode 4
• Oil mist extraction
• Internal cooling (IKZ): 40 bar
• Paper band filter
• Measuring probe Renishaw OMP 60
• Chip flushing gun
Machine Benefits
Technical Machine Benefits
• Tool holder: hsk 100
• Tool positions: 270 / 360
• Number of pallets: 2
Kwjdpoyaau Tefx Adwst
• Pallet size: 800 x 800 mm
Extra Information
Machine still under power
Listing
Germany
6,946 km
DMG DMC 100 H
DMGDMC 100 H
Call
Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information.
Additional equipment
• Electronic handwheel
• Operating mode 4
• Oil mist extraction
• Internal cooling (IKZ): 40 bar
Ksdpfx Adsyaaugswswt
• Paper band filter
• Chip flushing gun
Machine Benefits
Technical Machine Benefits
• Number of pallets: 2
• Pallet size: 800 x 800 mm
• Tool positions: 270 / 360
• Measuring probe: renishaw omp 60
Extra Information
Machine still under power
Listing
Germany
6,946 km
DMG DECKEL MAHO DMC 60U RS5
DMG DECKEL MAHODMC 60U RS5
Call
Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information.
Additional equipment
• Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version
• Coolant Tank: 900 L
• IKZ: Form AD with Paper Band Filter
• Measuring Probe: Heidenhain TS 641 (Infrared)
• Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical
• Rotating Viewing Window
Machine Benefits
Technical Machine Benefits
• Production hours: 54347 operating hours, 3500 spindle hours
Kwsdpeyaam Aefx Adwet
• Universal milling head with controlled b-axis
• Very well maintained machine operated for high-end applications
• Spindle replacement in 2021 at a cost of approximately 40000 euros
• Checkbook maintained
Extra Information
Disc changer and 4 pallets are included
Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel"
Serviced regularly... excellent condition... new spindle has 3,500 hours
Listing
Olching
6,681 km
5-axis machining centre
DMGDMG DMC 80 FD duoBLOCK
Call
Condition: used, _____
Description:
Year of manuf. : 2008
Control : Siemens 840
Speed : 8000 rpm
Movement X/Y/Z : 800/800/800 mm
Tool holder : HSK 100
In General:
Year of manufacture:2008
Speed:8,000 rpm
Tool holder:HSK 100
Control system:Siemens 840 D
Kodpfx Aswx A Hqodwjwt
Travel X/Y/Z:800/800/800 mm
Table speed:700 rpm
Spindle:
Technology:Geared spindle
Speed:8,000 rpm
Max. power:28 kW
Max. torque:727 Nm
Tool holder:HSK-100
Turning function:Spindle clamping
NC swivel head:
Technology:Universal milling head
B-axis:0.001°
NC- Millturn table:
Max. speed:700 rpm
Clamping surface:800 x 630 mm
Max. table load:800 kg
Tool magazin:
Technology:Chain magazine
Number of stations:120
Tool changer:Double gripper
Equipment:
Chip disposal:Chip conveyor
Coolant supply:IKZ system, 80 bar
Coolant temperature control:Immersion cooler
Position measuring systems:Direct in all axes
Automation:2-fold pallet changer
Turning function:Spindle clamping + rotary table
Workpiece measurement:Preparation for measuring probe
Process monitoring:Operating mode 4
Set-up mode:Electronic handwheel
Emulsion mist separator:Mechanical separator
We make it easier for you to find: "dmg ctx 310 eco"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Dmg Ctx 310 Eco (409)
Search Machineseeker now with more than 2,00,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month


















































































































































































































































































