Used Dmg Ctx 310 Eco for sale (409)

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Lodjx Ih Rtjpfx Adwehb Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: used, Year of construction: 2018, liter capacity 600 l Pressure of pump 2 / 3 / 40 bar control Schütze / Contactors total power requirement 11 kVA weight of the machine ca. 450 kg dimensions of the machine ca. 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors Lhsdpfx Aex Urn Ajdwsb - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Ledpfxeyac Tls Adwohb Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment Lhedpfx Adjx D Epcjwjb • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 3,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Additional equipment • Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm • Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm • Total Power Requirement: 17 kVA • No chip conveyor included / No automatic measuring probe included / No tools included Lsdpfx Adjx E D U Aswohb Machine Benefits Qualitative Machine Benefits • Low spindle hours and power-on hours. • Never used in series production; operated with care and proper procedures. • Warm-up programs and maintenance routines followed for optimal performance. Technical Machine Benefits • Torque: 57 / 82 nm / rapid traverse (x/y/z): 12 m/min /feed rate: 10000 mm/min • Table clamping surface: 630 x 500 mm • Swivel range: -5 / +110° • Max. Table load: 200 kg • T-slots: 14 h7 / t-slot spacing: 63 mm • C-axis rotation: +/- 360° • Complete x-axis bearing overhaul including ball screw and bearing assembly. / various hydraulic components overhauled. / tool changer readjusted and sensor system replaced. • New door switch installed. / new discs installed (with some chip debris affecting them). / new coolant pump installed. / new screen installed. / new handwheel hr410 installed. • Machine is 5-axis machine with 3+2 configuration Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1990, operating hours: 30,912 h, This 5-axis DMG DECKEL MAHO MH 800 E2 was manufactured in 1990. It features a semi-cabin splash guard, an adaptable control unit with power unit, an electrical cabinet, a MAHO vertical tool changer, an NC rotary table, and an electric manual control panel. Consider the opportunity to buy this DMG DECKEL MAHO MH 800 E2 universal machining centre. Contact us for more information about this machine. • Splash guard cabin (semi-cabin) • Control with adaptation and power unit, including electrical cabinet Ljdpfxex D Hqzj Adwshb • Interface for connecting peripheral devices • MAHO vertical tool changer • NC rotary table • Electric manual control panel • Precision/positioning: • Position tolerance T_P: 0.020 mm • Position uncertainty P_a: 0.015 mm • Reversal span U: 0.005 mm • Position scatter: 0.005 mmAdditional equipment • Damping plates

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 9 kVA, torque: 82 Nm, controller manufacturer: Siemens, table width: 560 mm, table length: 900 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, overall weight: 5,200 kg, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Vertical machining center DMG MORI SLIMline Multi-Touch Control Table size: 900 x 560 mm Table load capacity: 600 kg Direct path measuring system X, Y, Z SK 40 spindle taper 20 bar internal coolant supply 60-position tool changer Lhodpfow Ei E Hox Adwsb Chip conveyor Renishaw probing kit for SIEMENS control

Condition: excellent (used), Year of construction: 2019, Delivery at the beginning of June 2026!!! Control: CELOS with Heidenhain TNC 640 Milling head: Universal milling head with controlled A-axis HSK63A Spindle options: Spindle tool holder HSK-A 63 Tool magazine: Tool magazine, wheel type, 63 positions HSK63A Lsdpfx Aox Uqyksdwjhb Coolant / Chip removal: Through-spindle coolant system, 80 bar, frequency controlled; oil/emulsion mist extraction unit; cooling device with air blast Measuring / Monitoring: Heidenhain infrared probe SK 40, 3D quickSET; MPC Machine Protection Control Further options: Operating mode 4 Options for HEIDENHAIN control: Electronic handwheel Documentation: 1 set documentation in German; electrical schematic in German Display language: German

Condition: good (used), Year of construction: 2021, operating hours: 2,400 h, functionality: fully functional, 2-axis universal turning center with driven tools, C-axis, Y-axis, and sub-spindle Machine in extremely well-maintained condition Ergonomic DMG MORI SLIMline® panel Main spindle A2-8" with AC motor, power 17 / 25.5 kW (100/40% DC), 4,000 rpm Radial servo turret VDI 40 with 12 driven stations, Trifix® interface (DIN5480) Direct measuring system for X and Y axes Chip container Hydraulic hollow clamping cylinders, max. bar capacity Ø80 mm Sub-spindle A2-6" with ISM 52 spindle motor, power 13 / 14 kW (100/40% DC), 5,000 rpm Electronic handwheel Y-axis travel ± 60 mm DMG MORI IoTconnector Control DMG MORI SLIMline® 0i-F Plus Fanuc Touch 19" Bar package & interfaces Workpiece catcher up to Ø80 x 200 mm, max. workpiece weight 4 kg Interface for bar feeder or loader (DMG MORI standard) Chip conveyor on right side 4-color signal tower Main spindle chuck Hydraulic 3-jaw chuck D254 SMW BB-D 250 Bore passage Ø78 mm (limits bar capacity to Ø78 mm) Sub-spindle chuck Hydraulic 3-jaw chuck SMW BB-D 210 Bore passage Ø66 mm Draw tube inner diameter Ø52 mm Sub-spindle options External chuck washing Pneumatic ejector with internal coolant supply Coolant / chip removal 12 bar high-pressure system with dual filter and manual switching Coolant spray gun 5 bar Measuring / monitoring Ljdex Tg I Ujpfx Adwohb Manual tool probe MARPOSS General options Parts conveyor front left instead of parts bin Conveyor outside working area Chuck jaw options Set of soft jaws for BB-D 210 (3 pcs per set, 3 sets) Set of soft jaws for BB-D 250 (3 pcs per set, 3 sets) Fanuc options Tool monitoring software NCGuide software for programming environment incl. MANUAL GUIDEi Technology cycle Alternating Spindle Speed Connectivity SERVICEcamera incl. accessories (antenna, charger, SD card) Special equipment / accessories Hydrafeed MSV 80 with floor rails, bar feed magazine, and modifications Swarf bin (Model 350) VDI40 holders with multiple seats D1 (2 pcs) VDI40X25/25 double-Y holder for 4x Ø25 mm (2 pcs) VDI40X25X100 25Ø boring bar holder (1 pc) Axial driven tool VDI40, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc) Radial driven tool VDI40 DIN 5480 H=100 mm, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc) Parting tool holder H=32 mm, VDI40, universal gearing (1 pc)

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. tool taper VDI 30 driven tools turning speeds 4.000 U/min travel -x1 axis 165 mm travel -z1 axis 220 mm travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. Ledpfx Adsxbtqijwohb - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Lhodpfx Adjxxn Ukewob Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,186 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Tool taper SK 40 This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine. Ledpfx Aox Sz Duodwjhb Application Types Milling

Condition: like new (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, turning length: 650 mm, turning diameter over cross slide: 350 mm, turning diameter: 385 mm, spindle speed (min.): 4,500 rpm, spindle bore: 67 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, For sale: Used DMG NEF400 V3, 5th Generation ISM 2-axis universal lathe with C-axis. Travel distances: X: 255mm Z: 800mm Swing over bed: 385mm Swing diameter: 350mm Turning length: 650mm Equipment: - Main spindle as integrated spindle motor - Max. spindle speed: 4,500 rpm - Drive power: 8.0/11.5 kW (100/40% duty cycle) - 12-position VDI30 disc-type turret with 6 driven positions - C-axis and spindle brake (hydraulic) Ledpfoxzqnrox Adwjhb - Automatic tailstock, MK4 mounting, travel: 680mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating spindle speeds for vibration-critical setups - Manual tool measurement device in work area - Hydraulic unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump: 12 bar, 23 l/min - Chip conveyor with discharge height of 1,250mm, discharging to the right Bar machining package consisting of: - Workpiece pickup unit with left-side conveyor for parts up to max. 65mm diameter, 150mm length, and 3kg max. weight - Bar clamping device inner draw-tube diameter max.: 67mm - Interface for bar loader magazine - Foot switch for tailstock operation - Hydraulic 3-jaw chuck SMW-AUTOBLOK - RMS sensor (Relocation Machine Security) Machine available immediately! Machine ready for operation! Loading by us included! Transport can be arranged upon request!

Condition: like new (used), Year of construction: 2011, operating hours: 9,080 h, functionality: fully functional, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel axes X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: - Tool turret: 12 stations, all powered - Driven tool speed: Max. 10,000 rpm - Parts catcher - Electrical connection: 400 V - Power consumption: 37.6 KVA - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB - Sub-spindle chuck: Kitagawa B206A521F - Swing diameter: 366 mm - Turning length: 705 mm - Spindle bore: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Main spindle power: 18.5 kW - Sub-spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manually deployable measuring arm for sub-spindle - Short bar loader, manufacturer: LNS - Includes tools: 8 fixed tools, 3 driven tools - Includes extraction system, brand: Indusa - Includes complete documentation Machine available immediately! Machine has been fully cleaned and inspected! Ledpjxzqhrsfx Adwshb We will undertake loading of the machine! Transport can be organized upon request!

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Media Chip conveyor Yes Additional Equipment KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle 15 bar pump with filter Lhedpfx Aox D D Uwodwsb Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2014, x-travel 730 mm y-travel 730 mm z-travel 880 mm size of pallet 2 x: 500 x 500 mm spindle speed: 12000 tool taper SK 40 distance spindle center to table 80 - 810 mm milling spindle drive 30 kW max. torque max. 102 Nm max. workpiece weight 500 kg max. workpiece diameter on pallets 800 mm max. workpiece height H = 1100 mm change time of pallets 9,5 sec Max. speed ot the feeder 60000 mm/min rapid traverse 60 m/min tool changer number of tools 40 max. tool diameter 110 mm max. tool-dia with free toolbox 320 mm max. tool weight 30 kg change-time chip to chip 4,4 - 10 sec Ledsv Htitspfx Adwehb change-time tool to tool 1,95 sec Number of working hours 15894 h total power requirement 46 KVA weight of the machine ca. 15 t required space 5,5 x 3 x 2,8 m Well-preserved horizontal machining center DMG-Mori, Mod. NHX 5000, built in 2014 with Siemens 840D CNC control with two pallets and 40-way tool changer. Read operating hours 23262, spindle hours 15894 Other data: Distance spindle nose - table center 70 - 950 mm Pallet indexing time 1.3 sec Indexing of the B axis (table) 360 x 1 degree Jog feed rate 0 - 5000 mm/min Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Lhjdpfxox R R Hcj Adwsb Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Lhsdpfx Adsx R R E Ssweb Table speed range: 12 min/-1 Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm

Condition: used, Year of construction: 2006, DMG DMC 70H Duoblock + RS4 CNC Machining Centre (2006) Manufacturer: DMG Model: DMC 70H Duoblock + RS4 CNC Machining Centre Year of manufacture: 2006 Condition: Used, powered on and ready for demonstration Power-on hours: 92,800 h Spindle hours: 70,200 h Spindle speed: 18,000 rpm Spindle mount: SK40 Tool magazine: 180 positions Lhjdpfx Aox S N E Hjdweb Internal coolant supply (IKZ): 40/80 bar Belt filter system RS4 pallet station including 4 pallets. Further information to follow.

Condition: like new (used), Year of construction: 2023, DMG CMX 50 Control unit: Siemens 840D sl X-axis travel: 500 mm Lhjdpox Sqyfjfx Adwob Y-axis travel: 450 mm Z-axis travel: 400 mm Year of manufacture: 2023 Weight: 4,700 kg

Year of construction: 1999, condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Lhjdpfjdk Rwnjx Adwsb Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 22,180 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC430, total height: 3,200 mm, table width: 1,250 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, product length (max.): 6,000 mm, number of axes: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control system, a SK50 spindle taper, and 120 tool stations. With spindle hours totaling 22,180, consider the opportunity to buy this DMG DMU 125 P hi-dyn universal machining centre. Contact us for more information about this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel distances: 1250 x 880 x 800 • Tool holder: SK50 • Changer: 120 tool positions in chain magazine • Gripper type: Double gripper • Control: Heidenhain TNC 430 • Working range: Longitudinal: 1250 mm Transverse: 880 mm Vertical: 800 mm • Dimensions: approx. 6 x 8 x approx. 3.20 m height • Weight: approx. 18,000 kgB axis is indexedAdditional data: • Full protection cabin Lsdsx Sz Dhspfx Adwehb • IKZ through spindle center • Blow air through spindle center retrofitted • Chip conveyor • Coolant tank 600 liters • NC rotary table D1250 x 1000 mm • Max. load at table center 2,000 kg • Clamping grid 9 slots 18H7 a 100 mm • Kit motor with SK50 gearbox – spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared measuring probe • Electronic handwheel • 4 operating modes possible • Flushing gun with pump Technical Specification Taper Size SK 50 Through-spindle Coolant Yes Dimensions Machine Depth 8000 mm

Condition: ready for operation (used), Year of construction: 2006, CNC machining center DMC 635V Year of manufacture 2006 Heidenhain TNC 530i control Control approx. 58,400 hours Program run approx. 19,980 hours According to the sticker in the control cabinet, the spindle and motor were replaced in January 2019 at 10,660 hours. No documentation available. Machine runs smoothly Travel distances X 635 Y 510 Z 460 Ljdpfx Asw Tir Uedwshb Tool holder SK 40 20-position tool changer Table 790×560 with chip conveyor Weight approx. 3700 kg This offer is directed exclusively at commercial enterprises within the meaning of §14 BGB (German Civil Code). No sale to private individuals.

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination * Lodpfx Asu Idbyedwjhb

Condition: used, Technical details: x-travel: 800 mm y-travel: 710 mm Lhedpfox A Szisx Adwjb z-travel: 710 mm speeds:: 6000 U/min table:: 500 x 630 mm with tool changer: 40 Plätze spindle taper:: SK 50 total power requirement: 25 kW weight of the machine ca.: 11500 kg