Used Dmg Ecomill 70 for sale (411)

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D General Data Measurements width 3150 Ndedpfx Aaox D Iv Eonjf Measurements depth 5564 mm Measurements height 2135 mm Machine weight 10000 kg Main Drive Spindle speed range 3600 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Tools Slots in storage 12 This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Nedjx Ih Rtjpfx Aanodf Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: used, Year of construction: 2002, Technical Data: Travel X-axis: 1250 mm Travel Y-axis (cross): 880 mm Ndjdpfxjx Iry Ss Aanef Travel Z-axis (vertical): 800 mm Tool holder: SK50 Drive power: 44 kW Tool magazine: 60 stations NC rotary table, table size: 1250 x 1000 mm Max. rotation speed of table: 8.1 rpm Universal milling head: B-axis Spindle speed range: up to 10,000 rpm Control unit: iTNC 530 Total connected load: 81 kVA Max. tool diameter for 30/60 tool stations: 100 / 110 mm Max. tool length from spindle nose: without tool breakage monitoring: 450 mm with tool breakage monitoring: 390 mm Features: - Heidenhain iTNC 530 control - 5-axis - 60 tool stations - NC rotary table - Coolant system

Condition: like new (used), Year of construction: 2017, operating hours: 23,043 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain TNC 640, workpiece weight (max.): 250 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 35,000 W, Year of construction: 2017 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Milling/turning table nc: Number of pallets: 30 places with robot Table dimensions mm: 450x400 Max. workpiece weight kg: 250 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/86 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper Equipment Chip conveyor Infrared probe Rinsing gun NC swivel rotary table Preparation for the use of the 3D quickSET Laser tool measurement for measuring tool length and diameter Direct measuring system XYZ Ndjdpfx Aex Nhraeanof Spindle active cooling unit MPC – Machine Protection Control Prepareted for automatation via M65 Paper band filter Machine running times Under power: 43989 Spindle Working: 23043

Condition: used, Year of construction: 2017, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, controller manufacturer: SIEMENS, controller model: 840 D CELOS, CONTROLS .. CNC controls SIEMENS 840 D CELOS WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 730 mm .. Y-axis travel: 730 mm .. Z-axis travel: 880 mm .. rotating range B-axis from: 0 ° .. rotating range B-axis up to: 90 ° TABLE .. table surface (left-right): 500 mm .. table surface (front-back): 500 mm .. workpiece load (max): 500 kg SPINDLE / HEAD .. spindle revolutions (max): 15000 /min .. tool fixture: ISO BT 40 .. drive power: 30.7 kW AXIS DRIVES .. traverse velocity X (max): 5000 mm/min .. traverse velocity Y (max): 5000 mm/min .. traverse velocity Z (max): 5000 mm/min .. rapid traverse X: 60000 mm/min .. rapid traverse Y: 60000 mm/min .. rapid traverse Z: 60000 mm/min TOOL MAGAZINE .. magazin type: disc magazine .. number of positions: 40 .. tool diameter max.: 70 mm .. - with free neighbour positions: 170 mm .. tool length max.: 550 mm .. tool weight max.: 12 kg .. tool changing time: 2.5 s AUTOMATIC WORKLOAD EQUIPMENT .. store type: pallet changer .. number of store positions: 2 .. Workpiece diameter max.: 800 mm .. workpiece height (max): 1000 mm .. pallet length: 500 mm .. pallet width: 500 mm .. number of pallets: 2 ELECTRICAL SPECIFICATIONS .. mains power supply: 37.3 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4784 mm .. space requirements -front/back-: 3078 mm Ndodjx I Abyepfx Aanef .. total height: 2852 mm .. total weight approx.: 12000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. closed cabin: yes .. European CE standards: yes Accessories - Chip conveyor

Condition: used, Year of construction: 2011, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm Control SIEMENS SINUMERIC 840D table-size 2.900x700 mm table weight 2.150 Kg tool adaptor SK 40 DIN 69872 workpiece length - max. 300 mm workpiece weight 6 kg workpiece dia. 80/130 mm 30 fach main drive 18,4/14 kW Ndodpfsv Da T Hex Aanof speed 14.000 mm/min rapid traverse 40 m/min feed 40 m/min Machine on 18.859 h Spindle hours 5.666 h internal coolant system feed 40 Bar/600 l Chip coveyor inkl. Machine on 19.230 Spindle hours 5.998 h total power requirement 55 kW weight of the machine ca. 14.520 kg dimensions of the machine ca. 10.280 x 7.230 x 3.042 mm Acceleration in the axis 4 m/s2 -Cleaning gun -Portable handwheel -Direct measurement system

Condition: ready for operation (used), Year of construction: 2004, operating hours: 15,652 h, General Data Machine weight 6500 kg Control Unit Brand HEIDENHAIN Model ITNC 530 Main Drive Ndsdjx Ixiaopfx Aanef Number of axis 5 Spindle Speed 18000 RPM Tool taper SK 40 Movement X-Axis Movement 500 mm Z-Axis Movement 380 mm Y-Axis Movement 480 mm This 5-axis DMG DMU 50 eVo was manufactured in 2004. It features X, Y, and Z axis travel of 500/420/380 mm, rapid traverse of 50 m/min, and a spindle speed up to 18,000 rpm. Equipped with a SK40 tool holder, 32-position tool magazine, and internal coolant supply at 40 bar. Consider the opportunity to buy this DMG DMU 50 eVo universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No minimum price – guaranteed sale to the highest bidder! Only 113 operating hours! The payment deadline for the machine is 04/12/2025! Placing a bid obligates you to collect the machine on time, between 12/10/2025 and 12/12/2025! The machine can be inspected on 11/25/2025! TECHNICAL DETAILS Turning length: 336 mm Turning diameter: 440 mm Bar capacity (max.): 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Shank diameter for square tools: 20 mm Shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm Ndodpfex Itdxjx Aanef Rapid traverse in X-axis: 30,000 mm/min Rapid traverse in Z-axis: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT • Coolant system • Chip conveyor

Condition: used, Year of construction: 2019, x-travel 3.400 mm y-travel 3.400 mm z-travel 1.600 mm Control CELOS 840D sl Op Siemens max. spindle speed 20 - 15.000 min/-1 power capacity - main spindel 52 / 42 kW tool taper HSK-A100 max. Torque 404 / 280 Nm swivellable B: -30° / +180 ° table diameter 2.500 x 2.000 mm max. table load 10.000 kg table speed 5 min/-1 Ndjdsx H Tt Dspfx Aansf distance spindle center to table hor.: 130 - 1.730 mm distance spindle center to table vert.: 230 - 1.830 mm distance spindle nose and table hor.: -1.500 - 1.900 mm distance spindle nose and table vert.: -1.600 - 1.800 mm type 5x Rad- / Wheel number of toolpositions 303 pos. max. tool diameter 110 mm max. tool-dia with free toolbox 280 mm max. tool length 900 mm max. tool weight 45 kg tool changing time 7,5 sec tool taper HSK-A100 rapid traverse 60 / 30 / 40 m/min total power requirement 140 kVA weight of the machine ca. 106 t dimensions of the machine ca. 14,0 x 13,0 x 7,0 m 5-Axis-CNC-Heavy-Duty-Machiningcenter Universal DMG MORI - DMC 340 U - Accuracy package - MDynamics package (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Cone cleaning station with rotating brushes - Balluff tool identification - Machine protection via rapid shutdown (MPC) - Laminated safety glass - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with screen on the control panel

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Ndsdpfxexl Nfqj Aanef Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: ready for operation (used), controller manufacturer: Heidenhain Dialog 112, empty load weight: 8,900 kg, total length: 4,090 mm, total width: 3,890 mm, total height: 2,960 mm, including high pressure cooling through spindle chipconveyor Longitudinal travel X-axe: 1000 mm Cross travel Y-axe: 800 mm Travel (height) Z-axe: 500 mm Dimensions Clamping space - table: 1250 x 800 mm Power on spindle: 15 kW Nedpfxsx Nr E De Aanodf Admission in millingheadspindle (ISO): SK 40 Max speedrange: 15 000 rpm Power needed: 50 kVa Toolchanger: yes Number of tools: 30x

Condition: used, Year of construction: 2021, x-travel 560 mm y-travel 560 mm z-travel 630 mm Control DMG MORI F31iB spindle tunring speed 14.000 U/min max. torque 120 Nm table surface area 400 x 400 mm table load capacity 400 kg rapid traverse 50.000 mm/min tool diameter 70 mm tool length - max. 400 mm workpiece weight max. 8 kg Ndsdpfx Aox H Txgjanof Number of working hours ca. 9.911 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,520 h, General Data Measurements width 1200 mm Measurements depth 1050 mm Measurements height 2000 mm Main Drive Laser power 2.5 kW Spindle speed range 14000 1/min Spindle motor power 14 kW (100% ED) Tool taper HSK64 Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm Table Outer length 800 mm Outer width 650 mm Tools Slots in storage 60 Type of tool holder HSK64 Media Njdpfex Hblzsx Aansdf Oil water separator Yes Chip conveyor Yes Internal cooling Yes Additional Equipment Inner cooling system 40 bar, 23 l/min Scraper belt chip conveyor with coolant system 600 liters, paper belt filter Infrared measuring probe Renishaw OMP 60 Version for SK 40 (the probe is automatically inserted into the work spindle from the tool magazine) Rinsing gun with pump 2 bar/40 l/min Oil/emulsion mist separator Tool measurement in the Blum Laser work area MPC Machine Protection Control & 3D quickSET Surcharge for powder feeder Twin System Suction unit with secondary filter stage electronic handwheel Siemens 840D Machine was upgraded to new machine status by DMG in 2020 and then delivered. This DMG MORI LASERTEC 65 3D Hybrid 5-axis precision machine for milling and laser machining was manufactured in the year 2014 in Germany. It is special for the ability to produce components using 3D Printing and to post-process them at the same time. Ideal for manufacturers who need a high-performance additive manufacturing solution of metallic 3D components. The machine features a fixed integration of the laser head in the headstock for greater installation space and more performance. In addition it offers 5-axis material application via coaxial nozzle for uniform powder distribution regardless of the laser build-up direction. It is the ideal dedicated solution for prototypes, small series, repair and coating. This LASERTEC 65 3D is equipped with an integrated SK 40 motor spindle with spindle speed up to 14,000 1/min. In addition it operates with a fiber-guided diode laser of 2.5 kW laser power. Next to internal coolant supply (IKZ) it comes with Renishaw measuring probe and Blum tool measurement option. Furthermore it is appreciated for its generously sized work area that is easily accessible, along with travel dimensions of 650 × 650 × 560 mm (X / Y / Z). It is a supremely adaptable 5-axis machine suitable for a wide array of laser and milling tasks, delivering consistently high-quality results without compromise. Application Types Milling

Condition: excellent (used), Year of construction: 2015, operating hours: 7,110 h, functionality: fully functional, DMG DMU 65 Monoblock 5-Axis Machining Centre (2015) Manufacturer: DMG Model: DMU 65 Monoblock Year of manufacture: 2015 Nodpjx Iwb Iefx Aansdf Condition: Used, very good, still in production. Power-on hours: 21,336 h Spindle hours: 7,112 h Control: Heidenhain iTNC 530 X-axis: 735 mm Y-axis: 650 mm Z-axis: 560 mm Tool holder: SK40 Spindle speed: 10,000 rpm Chip conveyor Internal coolant supply (IKZ) 40 bar Band filter system 3D probe Documentation Additional accessories optional.

Condition: like new (used), Year of construction: 2023, DMG CMX 50 Ndsdpfx Aajx H Nuqenjf Control unit: Siemens 840D sl X-axis travel: 500 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Year of manufacture: 2023 Weight: 4,700 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 61 kVA, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 4,000 kg, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 500 mm, table length: 630 mm, table load: 4,000 kg, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 19,500 h, number of slots in tool magazine: 120, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - Ndedperxrklsfx Aanof C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of axis 5 Media Chip conveyor Yes Movement X-Axis Movement 780 mm Ndodpfxsx Hbmfe Aanef Z-Axis Movement 630 mm Y-Axis Movement 560 mm This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, Control Unit Brand SIEMENS Model 840 D Main Drive Number of axis 5 Njdex H U Ezspfx Aansdf This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,807 h, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 14000 Tool taper SK40 Number of axis 3 Nodpfox D Rxcex Aanodf Movement X-Axis Movement 650 mm Y-Axis Movement 520 mm Z-Axis Movement 475 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Grid plate for clamping fixtures and vices pitch: 50x50 12H7/M12 This 3-axis DMG MORI DMC 650V was manufactured in 2014. It features a spindle speed of 12000 rpm, X/Y/Z travels of 650/520/475 mm, and rapid feeds up to 36 m/min. The machine includes a SK40 tool taper, a 20-position tool magazine, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the DMG MORI DMC 650V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 5 Spindle Speed 14000 RPM Spindle motor power 18.9 kW Tool taper SK 40 Movement X-Axis Movement 400 mm Z-Axis Movement 375 mm Y-Axis Movement 400 mm Tools Slots in storage 30 Type of tool holder HSK63 Table Ndodpex D D Tysfx Aanjf Table Width 450 mm Table Length 400 mm Media Internal cooling yes This 5-axis DMG MORI DMU 40 eVo was manufactured in 2015, featuring a robust HEIDENHAIN iTNC 530 control system, a new spindle, and a high-pressure cooling system. It offers X, Y, Z movements of 400 mm, 400 mm, and 375 mm respectively, with a spindle speed of 14000 1/MIN and a 30-position tool magazine. Consider the opportunity to buy this DMG MORI DMU 40 eVo vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2004, operating hours: 33,702 h, condition: ready for operation (used), Main Drive Spindle speed range 6000 Spindle bore 73 mm Number of axis 2 Movement X-Axis Movement 213 mm Z-Axis Movement 450 mm Tools Type of tool holder VDI 30 This DMG Gildemeister CTX 310 was manufactured in 2004. A robust horizontal turning machine featuring a max workpiece diameter of 246mm, length up to 445mm, and a spindle speed of 6000 rpm. Includes a 12-position turret and 20 VDI 30 tool holders. Ideal for precise turning operations. Contact us for more information about this machine. Application Types Nsdpfsx D Rmgjx Aanedf Turning

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand SIEMENS Ndjdpfx Asx D Ii Esanjf Model 840D sl Operate with CELOS® Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 660 mm Media Chip conveyor Yes Additional Equipment Tool breakage control system in the tool magazine Two pallets with threaded holes Automatic turning APC with 2 stations Direct distance measuring system Rotating viewing window in the work area door Coolant rinsing gun I/F for oil mist separator Knoll KF110/700 compact filter system Spindle sensor measuring system with optical signal transmission / Cooling unit for spindle Signal light (red, yellow, green, blue) This 4-axis DMG MORI NHX 4000 was manufactured in 2017. A robust horizontal machining center, it features a travel range of 560x560x660 mm and a clamping surface of 400x400 mm. The spindle was completely overhauled in May 2023. It has a tool magazine with 60 slots. The tool Holder is HSK 63 HSK-A63 motor spindle and the spindle speed range is 20 - 20,000 min-1. The machine includes a CELOS® control system with Siemens 840D sl Operate, enhancing usability with a multi-touch screen. For more information about this horizontal machining center, please reach out to us. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 123 h, Control Unit Brand SIEMENS Model SINUMERIK One 828D Main Drive Spindle speed range 12000 Movement X-Axis Movement 550 Y-Axis Movement 550 Z-Axis Movement 510 Table Outer length 850 mm Outer width 650 mm Table load 600 kg Tools Slots in storage 24 Nsdpfx Aex D Rw Eoanodf Additional Equipment Automation interface with 6-axis robot, high dynamics Siemens PLC and HMI with safety module IDS industrial camera with Halcon Vision integration This 3-axis DMG M1 vertical machining center was manufactured in 2022. It features a Siemens SINUMERIK One 828D control, a spindle speed of 12,000 rpm, and a table size of 850 x 650 mm supporting up to 600 kg. Equipped with a 24-place tool changer and both internal and external cooling systems, it ensures precise milling operations. If you are looking to get high-quality milling capabilities consider the DMG M1 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, General Data Machine weight 20000 kg Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Spindle speed range 4000 Number of axis 7 Movement X-Axis Movement 550 mm Y-Axis Movement 110 mm Turret Number of turrets 1 Tools Number of index 60 Number of station 12 Max tool length 350 mm Type of tool holder HSK-A63 Additional Equipment Oil mist extraction Coolant tank with belt filter system Nedpfx Aasx D S Dgjnodf Internal coolant system with 80 bar pressure Approx. 30 tool holders This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2013, operating hours: 37,217 h, condition: ready for operation (used), General Data Machine weight 5300 kg Measurements height 2050 mm Measurements depth 2810 mm Nsdpfxsx D Eqao Aanedf Main Drive Number of axis 6 Spindle Speed 5000 RPM Spindle motor power 20 kW Control Unit Brand SIEMENS Model Sinumerik 840D This 6-axis DMG TWIN 65 Rg1 was manufactured in 2013, featuring twin-spindle turning capabilities with CNC control 840D powerline. It includes two 12-station star turrets, main and counter spindles, Y-axis, and a chip conveyor. The machine offers a spindle speed range up to 5600 rpm and a chuck diameter of 150 mm. Consider the opportunity to buy this DMG TWIN 65 Rg1 horizontal turning machine. Contact us for more information about this machine. Application Types Turning