Used Dmg for sale (424)

Condition: used, Year of construction: 2015, turning diameter: 260 mm, Accessories: The machine can be inspected. - Sold without extraction system! - KM unit (see pictures) - Sold without tools - Sold without tool holders. Dismantling and loading by the seller, transport by the buyer. Sale only within the EU. Kedpfx Aexnbgfjabsnc

Condition: used, Year of construction: 2016, x-travel 1150 mm y-travel 700 mm Knodpfxjxfwgvj Aabsc z-travel 550 mm Control Heidenhain TNC 640 total power requirement 24/16 kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, total height: 2,800 mm, total length: 2,230 mm, total width: 2,665 mm, table width: 650 mm, table length: 850 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,377 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in as-new condition and available for immediate delivery. 3-axis geometry is within manufacturer tolerances. The main spindle runs smoothly and is in as-new condition with 0.003 mm runout. Retention force is also good at 8 kN. Lubrication and hydraulic oils have been replaced. All functions have been tested. Of course, the machine can be inspected and tested on site. Transport and installation are available at extra cost and by arrangement. Knjdpfjwytmkjx Aaboc The machine is equipped with all options available on an M1. Chip conveyor / coolant system / internal coolant 20 bar / air through spindle center Manual wash gun Renishaw OMP 60 probe TS27 tool measurement Machine hours: 14,150 hours / automatic mode: 1,377 hours, mostly aluminium machining.

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control iTNC 530 Heidenhain Speed Mainspindle 50 - 18.000 min/-1 power capacity - main spindel 28 kW max. Torque 121 Nm tool taper HSK-A 63 Swivel range -30 / +180 ° table surface area dia. 900 x 700 mm max. table load 1.400 kg table speed 30 min/-1 rotatable C: 360 ° number of toolpositions 40 pos. Ksdpfxju Ag Irj Aabenc tool taper HSK-A 63 max. tool diameter 230 mm max. tool length 450 mm max. tool weight 15,0 kg rapid traverse ( X / Y / Z ) 60 m/min Feed force ( X / Y / Z ) 13 / 13 / 9 kN weight of the machine ca. 13,0 t dimensions of the machine ca. 5,5 x 3,5 x 3,5 m total power requirement 68 kVA 5 Axis Machining Center - Universal DMG DECKEL MAHO - DMU 80 P duoBLOCK - Swivel-Milling-Head (B-Axis) - NC-Rotary Table (C-Axis) - Application Tuning Cycle ATC - WITHOUT clamping devices

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2740 mm Measurements depth 3605 mm Measurements height 2855 mm Machine weight 6950 kg Control Unit Brand SIEMENS Model Sinumerik one Main Drive Spindle speed range 12000 Spindle motor power 9 kW Number of axis 4 Movement X-Axis Movement 1100 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 550 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 24 m/min Table Table load 1700 kg Tools Type of tool holder SK40 DIN 69871 Additional Equipment Chip Conveyor in Scraper Belt Design Coolant Spray Gun Internal Coolant Supply 20 Bar Bed Flushing via M-function This 4-axis DMG MORI M2 vertical machining center was manufactured in 2023. It features a spindle speed range of 20 to 12,000 rpm, a tool magazine for 24 tools, and a chip conveyor. The machine offers a travel path of X/Y/Z - 1100/550/510 mm and a table size of 1400 x 600 mm. If you are looking to get high-quality milling capabilities, consider the DMG MORI M2 machine we have for sale. Contact us for more information. Ksdpjxd H S Eefx Aabsnc Application Types Milling

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm Kjdpfx Aajw S Efzebonc bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Year of construction: 1999, condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Knodpfx Aedk Rwnjaboc Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 3,540 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Siemens, controller model: 840D SL, table load: 300 kg, spindle speed (max.): 24,000 rpm, spindle nose: BBT Big+, number of slots in tool magazine: 25, Equipment: documentation/manual, DMG Mori Milltap 700 machine for sale, in new condition. Kjdpfjxghpwsx Aabjnc Siemens 840 D SL control. We bought the machines because of the small space requirement, 24,000 spindle, fast tool change and 60 meter rapid traverse. The machine can be viewed and tested under power. We can help with packaging and loading onto a truck.

Condition: good (used), Year of construction: 2017, operating hours: 10,665 h, machine/vehicle number: NL256171030, Control M730 UM Mapps CELOS Knedpewum Hasfx Aabjc Max. turning diameter: 350 mm Turning length: 700 mm Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle bore: 80 (91) mm C-axis: 0.001° Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 20 pos. Square tool shank height: 25 mm Drill shank diameter: 50 mm Driven tool speed range: max. 10,000 rpm Driven tool drive power: 5.5 / 4.2 kW Machine weight: approx. 6.4 t Space requirements: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI – NLX 2500 SY / 700 - Counter spindle - Tool drive - C, Y-axis

Condition: used, Year of construction: 2016, x-travel 600 mm y-travel 560 mm z-travel 510 mm Control Siemens SlimLine Max. rpm 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 82 / 54 Nm tool taper SK 40 distance spindle nose and table 120 - 630 mm table surface area 900 x 560 mm max. table load 600 kg T-slots 5 work height max. 850 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg rapid traverse 30 m/min feed power 5 kN feed speeds max. 30.000 mm/min total power requirement 32 kVA Kodpjtqmnpofx Aabenc weight of the machine ca. 5,0 t dimensions of the machine ca. 4,0 x 5,0 x 3,0 m CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V - Operating hours: 6,516 h - Spindle hours: 2,868 h

Condition: ready for operation (used), Year of construction: 2004, Main Drive Spindle speed range 12000 Number of axis 5 Movement X-Axis Movement 630 mm Y-Axis Movement 560 mm Z-Axis Movement 560 mm This 5-axis DMG DECKEL MAHO DMU 60T was manufactured in 2004. Ideal for complex machining tasks, this universal machining centre offers X, Y, and Z-axis travels of 630 mm, 560 mm, and 560 mm respectively. Consider the opportunity to buy this DMG DECKEL MAHO DMU 60T universal machining centre. Contact us for more information. Knedpsxdfkyefx Aabjc Application Types Milling

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad Ksdpfju Idbyox Aabonc table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: excellent (used), Year of construction: 2024, operating hours: 2,111 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, table width: 1,100 mm, table length: 560 mm, rotational speed (max.): 12,000 rpm, Vertical Machining Center DMG MORI CMX800V YEAR 2024 FANUC-0iMF Knjdjxgcubopfx Aabec Table: 1100x560mm, X800 Y560 Z510mm 12,000 rpm, BT40, ATC30

Condition: used, Year of construction: 2013, operating hours: 21,900 h, functionality: fully functional, TECHNICAL DETAILS X-axis travel: 935 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Control: Heidenhain ITNC530 Table Dimensions: 1,200 x 850 mm Table load: max. 4,000 kg Spindle: SK40 Spindle speed: 18,000 rpm Tool system Magazine capacity: 30 Kjdpjxdk Nujfx Aabsnc Production package with belt filter and high-pressure coolant (IKZ) 40 bar.

Condition: excellent (used), Monitor Display (108142) Kodpfoigqr Hex Aabsnc Make DMG Gildemeister Type Supply 11098, I.D.-No.259284 Monitor was taken from a mechanically defective machine function was tested

Condition: used, Year of construction: 2014, turning diameter max. 356 mm turning length 705 mm control 730 UM Celos greates pass round over bed 920 mm Swing dia. over traverse guideway 740 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min Tipp feed 0 - 5.000 mm/min number of toolpositions 12 pos. Schank height for square tool 25 mm Kedpfx Aaewd Txnobonc Drill shank diameter 50 mm Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 49 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis - only 13.000 hours of processing time - incl. 4x driven tools - incl. 6x standard holders

Condition: ready for operation (used), Year of construction: 2015, General Data Machine weight 3800 kg Control Unit Knedpfxexdflwe Aaboc Brand Siemens Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 635 mm Y-Axis Movement 510 mm Z-Axis Movement 460 mm This 3-axis DMG MORI ecoMill 635V was manufactured in 2015. Consider the opportunity to buy this DMG MORI ecoMill 635V vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2018, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm Knjdpfjvy Ig Hex Aabsc rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis

Condition: ready for operation (used), Year of construction: 2011, operating hours: 937 h, General Data Measurements width 1530 mm Measurements depth 775 mm Measurements height 2253 mm Machine weight 1800 kg Control Unit Brand Siemens Model Sinumeric 840D Main Drive Spindle speed range 40000 rpm Number of axis 5 Movement X-Axis Movement 120 mm X-Axis Rapid Traverse 10 m/min X-Axis Accuracy P10 μm Y-Axis Movement 120 mm Y-Axis Rapid Traverse 10 m/min Y-Axis Accuracy P10 μm Z-Axis Movement 200 mm Z-Axis Rapid Traverse 10 m/min Z-Axis Accuracy P10 μm Table Table load 10 kg Tools Max tool diameter 49 mm Max tool length 130 mm Type of tool holder HSK-32 Media Power consumption 25 kVA Additional Equipment Workpiece Measurement: DMG PP-400 Infrared probe Tool Measurement: RS NC-4 Coolant Conditioning Equipment: KM 10 Knodpexaqkqofx Aabsc This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with 40,000 rpm max speed, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options like a DMG PP-400 Infrared probe and RS NC-4 tool measurement. If you are looking to get high-quality milling capabilities consider the DMG ULTRASONIC 10 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Kjdeu Hq Rlspfx Aabsnc Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Model iTNC 530 HSCi Main Drive Spindle speed range 20 to 14000 Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Kodpfxoxc Rbnj Aabenc Additional Equipment Cabin roof: Crane loading possible by manually opening the middle roof segment Infrared measuring probe: Heidenhain TS 649 DMG 3D quickSET toolkit 4-color signal light Operating mode 4: Process monitoring during production Replacement spindle This 5-axis DMG MORI DMU 50 was manufactured in 2016, featuring a robust design with a travel range of X/Y/Z 500/450/400 mm and a rapid traverse of 30 m/min. It operates at speeds from 20 to 14,000 rpm with an inline spindle power of 20.3 kW. The machine includes a 60-position SK40 tool magazine, swivel rotary table for simultaneous machining, and a Heidenhain iTNC 530 HSCi control system. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control 840 D sl Siemens Knsdpfxewntx Nj Aabjc turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 130 / 87 Nm tool taper SK 40 DIN 69871 table surface area 630 x 500 mm max. table load 300 kg Swivel range 115 (-110 / +5) ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse X/Y/Z: 24 m/min feed speeds X/Y/Z: 10.000 mm/min total power requirement 32 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis simultaneous - swivable rotary table

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, General Data Machine weight 27750 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 10000 Tool taper ISO 50 Number of axis 5 Movement X-Axis Movement 2600 mm Y-Axis Movement 1100 mm Z-Axis Movement 900 mm Table Table load 4000 kg This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. Application Types Knjdpoxllmdefx Aabec Milling

Condition: used, Year of construction: 2008, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 810 D Powerline Siemens Main spindle: turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 work table: table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm T-slots 4x H12 / 1x 14 H7 Tool-Presetter: Kjdpfx Aastzvy Tebenc number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg change time 1,6 sec change-time chip to chip 7,0 sec feeds: feed speeds 20.000 mm/min rapid traverse 25 m/min total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - Machining Center Vertical DMG MORI SEIKI - DMC 1035 V ecoline - only 3.800 spindle hours

Condition: used, Year of construction: 2016, turning diameter max. 630 mm turning length 2.000 mm control 840 D sl Operate Celos distance between spindles 2.260 mm type ISM 102 turning speed range - main spindle 0 - 4.000 min/-1 power capacity - main spindel 33 / 40 kW max. Torque 580 / 700 Nm inner draw tube diameter 104 mm tool taper Capto C6 number of toolpositions 100 pos. max. tool diameter 140 mm max. tool weight 12 kg max. tool length 400 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 13,2 / 22 kW max. Torque 60 / 100 Nm tool taper Capto C6 B-Axis +/- 120 ° x-axis 650 mm y-axis +/-150 mm z-axis 2.050 mm type ISM 102 mm Spindle speed range subspindle 0 - 4.000 min/-1 power capacity - Sub spindle 28 / 37 kW inner draw tube diameter 104 mm total power requirement 70 kVA weight of the machine ca. 24 t dimensions of the machine ca. 7,5 x 3,0 x 3,0 m CNC - Turning- and Millingcenter DMG Gildemeister - CTX beta 2000 TC - Main- Sub- and Millingspindle - Betriebsstunden: Strom-Ein: ca. 28.007h / Spindellauf: ca. 11.868h - incl. steady rest slide - Chuck flushing device on the main spindle, external - Chuck flushing device on the counter spindle, external Knsdpfx Aajwyxw Ujboc - Coolant supply through the counter spindle - Compressed air cleaning of the safety windows of both work doors - Off-center turning and milling operations - Gear milling using the hobbing process - Technology cycle for applying an alternating speed for vibration-critical setups - WITHOUT three-jaw chuck (main- and counter spindle) - WITHOUT steady rest (carrier only) - WITHOUT tools - WITHOUT extraction system - WITHOUT measuring probe