Used Dmu 100 Evo for sale (205)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 17,797 h, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, number of slots in tool magazine: 32, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 90 °, TECHNICAL DETAILS Control: MillPlus iT Heidenhain X travel: 880 mm Y travel: 630 mm Z travel: 630 mm B axis: -30° / +90° C axis: available Spindle and Drive Spindle speed: 20 - 12,000 rpm Spindle taper: SK 40 DIN 69871 Torque at 40 % / 100 % duty cycle: 28 / 19 kW Table and Workpiece Table size: 1,250 x 700 mm Table load capacity: 650 kg NC rotary table: Ø 800 mm Tool Magazine Tool change system: 2 × 16 positions MACHINE DETAILS Operating hours: 43,802 h Spindle hours: 17,797 h Total power requirement: 44 kW Machine weight: 9.5 t Space requirements: 3.50 × 3.20 × 2.60 m Coolant system standard volume: 250 liters Hodjxf A E Ropfx Aiyenl EQUIPMENT - Renishaw OMP60 probe - Rotoclear - Rinse gun - High-pressure pump - Chip conveyor - Air filtration system - ICS (internal coolant supply)

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, Hnedpfx Aiovx N Shjysl We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, controller manufacturer: Heidenhain, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Travel paths X-axis: 350 mm Hedpfx Aiow N Im Asyjnl Y-axis: 240 mm Z-axis: 340 mm C-axis: 360° manual B-axis: +105° / -15° manual MACHINE DETAILS Control: Heidenhain

Year of construction: 1996, condition: good (used), A used machining center of the company DECKEL MAHO equipped with: - MillPlus CNC control - Rigid angular table - coolant system - lighting system - tool changer 25-fold - documentation traverse X/ Y/ Z 800/ 650/ 550mm spindle speed 20- 6300rpm tool holder SK 40 Hedpfx Ajhzt Theiyjnl Further tech. Data: see pdf. document Tech. Data and dimensions: Errors excepted.

Condition: ready for operation (used), Vertical machining center, travels: X mm630, Y mm560, Z mm560, spindle attachment SK 40, 20-position tool magazine, table mm1000x600 Hnodpfowf U Ndsx Aiyol cnc Heidenhain TNC426

Condition: used, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, controller manufacturer: Heidenhain, total height: 2,500 mm, total length: 4,000 mm, total width: 2,200 mm, table load: 200 kg, overall weight: 3,500 kg, Brand: Deckel Maho Model: DMU 50T Serial Nr: 500051 Controller: Heidenhain Table Dimensions: 500x700 Max Weight Table: 200 Kg Machine Course: X: 500mm Hnjdpew D Hafefx Aiyol Y: 400mm Z: 400mm Spindle: Rotation: 9000 mm/min Cone: SK 40 Carriage: 16 Positions Fast advances: X, Y, Z: 12 m/min Machine Dimensions: 4000 x 2200 x 2500 mm Machine Weight: 3500 Kg

Condition: good (used), Year of construction: 2003, x-travel 500 mm Hnjdpfx Aey Ralueiyol y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; HSK 63 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS Hodpewl R Dqofx Aiyenl CONTROL UNIT: HEIDENHAIN WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS

Condition: used, Pallet with 18H7 T-slots, suitable for DMG DMC 100 H and DMG DMC 100 U as well as DMC 125H/U Duoblock. More than 10 pallets available. Hnedoqx Uh Nopfx Aiyel

Condition: excellent (used), Year of construction: 2003, Machining center Deckel Maho DMU200P - very good condition - Available Immediately - Worldwide Export Control: Heidenhain iTNC530 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 12.000 U/min Spindle mount: SK50 tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar chip conveyor: . probe: Heidenhain TS642 electric handwheel: Heidenhain operating mode: 4 High-speed spindle attachment: 42.000 U/min Tool measurement: Blum Laser automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Tools: 60 x SK50 Hnodpfx Ajxrgitoiysl

Condition: excellent (used), Year of construction: 2004, Great opportunity to buy this 5 axis machining center with automatic loading cell. Including: Set of toolholders High pressure cooling through the spindle chip conveyor Paper belt filter Oil mist extraction Programmable coolant jet Heidenhain measuring probe TS 641 Tool breakage control BMO automatic loading cell with Yaskawa Motoman robot MH50 (installed in 2014) Including: 40 pallets 300 x 300 mm 40 Gressel clamps 4-way 0-span module Schunk Yaskawa DX100 controller X 500 mm Y 420 mm Z 380 mm Control Heidenhain TNC 530 Max spindle speed 18.000 rpm Power 35kW Tool magazine 60 tools Tool holder SK40 This machine combination can be inspected in operation upon appointment. Availability: April-May 2026 More information available on request. Hnjdpsyr N Rhjfx Aiysl Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Hnsdpjv Sy Sfsfx Aiyel Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: excellent (used), Year of construction: 2002, operating hours: 46,259 h, functionality: fully functional, machine/vehicle number: 11210001263, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 10,000 rpm, Control: Heidenhein Mill plus Clamping Table 1000 x 800 mm Taper HSK 100 Toolchanger 120 position Exchange of tables : 2 tables Coolant tank: 2000l Hnedjxzddtjpfx Aiyol Machine is in running condition, machine has spindle coolig

Condition: ready for operation (used), Year of construction: 2003, Make: DMG / DECKEL MAHO Hnedpfxsydfbmo Aiyol Type of machine: DMC 70 eVolution Year of manufacture: 2003 Control system: MillPlus Tool holder: SK40 x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm Speed range: 12.000 U/min max. Table load: 800 kg Table dimensions: 900 × 550 mm

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Make: MAHO Model: MH 1000 2x available! x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Hjdjp S Schepfx Aiysnl Immediately ready for use Free loading, transport no problem.

Condition: ready for operation (used), Deckel Maho 5100027000 Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hedji D Upgspfx Aiysnl

Condition: excellent (used), Year of construction: 2007, operating hours: 32,947 h, functionality: fully functional, Deckel Maho DMC 100H duo Block About the machine: Very robust machine. The main spindle was renewed in 2023. Technical Data: - Control: Siemens 840D - Travel range X, Y, Z axis: 1000/1000/1000mm - C-axis travel range: 360° - Clamping surface rotary table: 800x800mm - Rapid traverse: 60 m/min - Spindle speed: 20-12,000 rpm - Tool holder: SK50 - Tool magazine with 60 slots - Network connectivity - Automation interface possible Equipment: - Through-spindle coolant 50 bar with belt filter system - Work area flushing - Rinse gun - Chip conveyor An inspection or test under power on site is of course possible. We are happy to offer you transportation, installation, and commissioning of the machine at your site. All from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhaul Hnodpfx Asyhwqmeiysl - Automation of DMG machines and those of other renowned manufacturers. We support you! From purchasing your machine, through transport and installation, to commissioning and subsequent maintenance or repair work—you can count on us.

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m Hsdpfx Ajym Dz Reiyjnl CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,082 h, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details. • Apparent power: 60 kVA • Nominal current (max): 86 A • Fuse protection: 100 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V Additional equipment Hjdpfxoy Ndibj Aiysnl • 2 hydraulically clamped clamping towers (workholding) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2007, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm control iTNC530 Heidenhain B - axis +/- 90 x 1 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X-axis 100 m/min rapid traverse Y-axis 60 m/min rapid traverse Z-axis 60 m/min spindle turning speed - stepless 20 - 10.000 U/min Hnsdpfxoy Sbikj Aiyel tool taper SK50 power capacity at 100 % load 32,00 kW power capacity at 40 % load 48,00 KW max. torque at 40% / 100% load 294 / 196 kW table surface area 4.200 x 900 mm number of T-slots 9 T-slot - distance 100 mm T-slots 1x 18H7 / 8x 18H12 table load capacity - central/maximum 4.200 kg tool magazin: 80 tool diameter 115 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 360 mm weight of tools max. 12,00 kg total power requirement 85,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 11,50 x 6,60 x H3,30 m Vertical machining center with HEIDENHAIN iTNC530 control, swivel milling head, partition wall, tool rack magazine with 120 positions, chip conveyor, coolant system, NC extension table (AR1), operating mode 4.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Hedpfoy Emufjx Aiysnl Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² Hjdpfey D Ilcjx Aiyjnl • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment Hedpfx Aijx Nr Tusyenl • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective, display defective (loose connection)

Condition: used, Year of construction: 2007, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control SIN840D pl C-axis (table) 360 x 0,001 ° B-axis (head) -10 - 180 x 0,001 ° rotary table speeds infinitely variable 10 - 500 U/min feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless programmable 20 - 8.000 1/min spindle turning speed - gearbox stage 1 20 - 1.600 1/min. spindle turning speed - gearbox stage 2 1.600 - 8.000 1/min. power capacity at 100 % load 19,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 772 / 492 Nm table surface area Ø1.100 mm table load 1,50 t tool magazine with 180 tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg total power requirement 85,00 kW weight of the machine ca. 32,50 t dimensions of the machine ca. 9,50 x 4,80 x H3,80m m 5-axis machining center with turning function and Hnjdpfx Aisy E Tvisyol pallett changer. Control SIEMENS SINUMERIK 840D powerline, Operating Mode 4, Tool-Magazin with 180 places, coolant filter system 980 liter, chip conveyor, coolant through the spindle, RotoClear.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We offer you: Manufacturer: Deckel Maho Model: FP4M special edition Year of manufacture: 2022 Control system: Heidenhain ND 7013 digital readout Technical data: Travel distances: X-axis: 500 mm Y-axis: 530 mm Z-axis: 400 mm B-axis: swiveling ±90° (180°) Main spindle: Tool holder: SK 40 Spindle speed range – main spindle: 25 – 3,000 rpm Drive power – main spindle (100/40%): 6 kW Worktable: Table size: D 800 x 480 mm Hjdpfsy Hfquex Aiysnl Feeds: Feed range: 6 – 500 mm/min Rapid traverse (x/y/z): 1,500 mm/min Space requirement (W x D): approx. 2,235 x 1,875 mm Machine weight: approx. 1,600 kg with worktable and milling head Technical features & accessories: - With additionally adjustable milling head on the Y-axis (130 mm) Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!