Used Doosan Compressor for sale (329)

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min Itsdpexn Amtofx Aaben rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Iodpoxmv U Iefx Aabotn

Condition: good (used), power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 7,835 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: DC13 Top speed: 40 km/h Empty weight: 22.930 kg Functional Bucket capacity: 4,5 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCWLECJM10066 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 266 l/min Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 9,244x3x3,66 Production country: KR Ijdpfx Aoxprqqsabotn Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Lithium-ion battery. Perfect forklift condition We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp in French ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. Itedpfx Asxpn Skoaben We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: excellent (used), Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, Fanuc control, commissioned in 2023, two turrets, all stations driven, Y-axis on upper turret, sub-spindle, parts catcher, Hainbuch chuck, chip conveyor, short bar loader, accessories. Iodpfx Aaexnpcujbjtn

Condition: used, Year of construction: 2019, operating hours: 5,270 h, Serial number: D1N0DA30AK074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21136 Specifications: Model year: 2019 Hours: approx. 5,270 Power: 270 kW / 375 hp Drive: 6x6 Tires (see photos) Road registration (white plates) High tailgate Central lubrication Itedpfxew Rkcpe Aabjn Reversing camera LED work lights Radio / CD Air conditioning / AC Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Operating weight: 24,600 kg Max payload: 26,825 kg Description: 2019 Doosan DA30 articulated dump truck.The machine is equipped with central lubrication, high tailgate, and a reversing camera.It has been under a service agreement and is well maintained.Ready for delivery on short notice. HK: 375 Hours: 5270 Own weight: 24600

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 18000 kg Control Unit Brand FANUC Itsdpfxjxirkqs Aabon Model FANUC 18I TB Main Drive Spindle speed range 2000 RPM Spindle motor power 30 kW Tool taper ASA A2-11 Number of axis 2 Movement X-Axis Movement 380 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 20 m/min Turret Number of turrets 1 Additional Equipment Holders for External Turning: HO10-25RL (4 pcs) Holders for Face Turning: HF10-25RL (2 pcs) Holders for Internal Turning: HB10-50N (4 pcs), HB10-40N (2 pcs) Reduction Sleeves: BS 40-10, -12, -16, -20, -25 (2 sets) This DOOSAN V740T vertical turning machine was manufactured in 2005. It features a maximum swing diameter of 800 mm, turning diameter of 740 mm, and a turning length of 760 mm. The main spindle supports a rotational speed up to 2000 RPM with a motor power of 30 kW. It includes a 12-position turret and rapid traverse rates of 20 m/min for both X and Z axes. If you are looking to get high quality turning capabilities consider the DOOSAN V740T machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: used, Year of construction: 2020, operating hours: 2,442 h, 2020 | Doosan DX140LCR-5 with PowerTilt OQ65 quickcoupler (without bucket) | Used Tracked Excavator | 2442 hours 📍Location: Germany, München 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 95000 or Make an Offer. Isdpfx Aaexmlxcebstn Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 84 inspection points 80 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Condition is good for age, ready to work, but U/C rubber pads are worn and chiped and some other smaller maintenance needed 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37601 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2010, operating hours: 5,623 h, Type of fuel: Diesel Empty weight: 4.450 kg Itodsw E Edxopfx Aaben Dimensions (LxBxH): 170 x 120 x 215 cm Lifting capacity: 3.000 kg Lift height: 477 cm Clearance lift height: 105 cm Fork dimensions: 1.050 x 1.000 mm - Lifting capacity: 3000kg - Lifting height: 4770mm - Overhead clearance: 2150mm - Free lift: 1050mm - Fork length: 1050mm - Maximum fork width: 1000mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Free-lift - Mast: Triplex - Drive: Diesel - Year: 2010 - Documentation available: No - CE marking present: Yes - Serial number: D30S-5-EMOQD-00934 - Operating hours: 5623 - Transport dimensions: 1700mm x 1200mm x 2150mm (l x w x h) - Transport weight [kg]: 4450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2008, turning diameter 900 mm turning length 1.600 mm control FANUC 21i TB turning diameter over bed 1.030/800 mm bar passage 160 mm travel -x axis 450 mm Itedpfxjvzhcds Aabjn travel -z axis 1.650 mm speed X/Z 12 /16 m/min Machine on 30.337 h Cutting time 16.067 h total power requirement 64,4 kVA weight of the machine ca. 16 t dimensions of the machine ca. 5.760 x 3.145 x 2.780 mm

Condition: excellent (used), Year of construction: 2010, turning length: 230 mm, turning diameter: 230 mm, spindle speed (max.): 5,000 rpm, spindle bore: 68 mm, spindle nose: A2-6, There are two of the same machine available. Itedpfjwzxcaox Aaben

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Itodpew Ruyxofx Aabon Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 2720 mm Measurements depth 4345 mm Measurements height 2815 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 12000 rpm Spindle motor power 18.5 kW Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1270 mm X-Axis Rapid Traverse 36 m/minute Y-Axis Movement 670 mm Y-Axis Rapid Traverse 36 m/minute Z-Axis Movement 625 mm Z-Axis Rapid Traverse 30 m/minute Workpiece Workpiece weight 1000 kg Additional Equipment RENISHAW tool and workpiece probe Internal cooling through the spindle: 12 Bar External spindle cooling with air and cutting fluid Belt chip conveyor Rinsing gun Itodoxfmpgopfx Aaben Coolant tank: 380 l Preparation for the 4th person External memory: 1 GB Block reading for 3D machining Handwheel This 3-axis DOOSAN DNM 650 II vertical machining center was manufactured in 2015. It features a Siemens 828D control, a spacious 1300 x 670mm table, and a robust 18.5 kW spindle motor achieving speeds up to 12000rpm. The machine includes a 30-position tool changer and SK40 tool taper, enhanced by a RENISHAW probe and internal cooling capabilities. If you are looking to get high-quality milling capabilities consider the DOOSAN DNM 650 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-A, workpiece height (max.): 1,725 mm, workpiece diameter (max.): 2,300 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of slots in tool magazine: 120, tool length: 650 mm, tool diameter: 300 mm, tool weight: 25,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​horizontal machining center with pallet changer and 120 tools. Iedoxlcivspfx Aabjtn

Condition: used, fuel type: diesel, fuel tank capacity: 78 l, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,970 h, Year of manufacture: 2015 Iodpfexb Ay Hsx Aabetn Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: used, Year of construction: 2004, operating hours: 10,000 h, Doosan PUMA 2000 LSY with bar feeder Year of manufacture/new: 2004 Operating hours: 9,400 Control: Fanuc 18i-TB Itodpfx Aoxizdgeaben Bar feeder: LNS Servo 2 Tool measurement: available Chip conveyor: available Tools: 12 stations Axes X: 250 mm Y: ±50 mm Z: 830 mm B: 830 mm

Year of construction: 2004, condition: good (used), We are offering a Doosan Puma 2000 LSY with bar feeder: - Year 2004, 9,400 operating hours - Fanuc 18i-TB - LNS Servo 2 bar feeder - Tool measurement system - Chip conveyor Ijdpfx Ajxk Uz Ijabotn - 12 tool stations - x, y, x, b = 250, ±50, 830, 830 Under power

Condition: used, Year of construction: 2018, operating hours: 7,450 h, Serial number: DHKCEWBSVH500xxxx Please contact ATS Norway for more information Itsdpfjwdvg Ijx Aabjn Please provide reference number upon request: 20213 Specifications: - 2018 model - 7450 Hours (will increase slightly) - 17,700 kg - 102.1 kW - Articulated boom - Blade - Central lubrication - G60 HK-mount - Stage 5 engine - 4 new rear tires - K80 trailer with electric hydraulics - Engcon ec219 rototilt - 650 l Gjerstad sanding bucket (new knife) - Tool cabinet - Wheel guards - Support legs - Blade - Lights - Air conditioning/ac - Radio - Ready to deliver Description: We have a 2018 Doosan DX165W-5 wheeled machine w/ K80 trailer hitch with electric and hydraulics, articulated boom, Engcon ec219 rototilt, Gjerstad sanding bucket for sale.u The machine is well maintained and cared for by the owner. It will be serviced again before sale. Ready for delivery Hours: 7450 Own weight: 17700 Total Weight: 17700 Kw: 102,1 Model: DX165W-5

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, General Data Measurements width 2615 mm Measurements depth 2158 mm Measurements height 2985 mm Machine weight 5000 kg Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 450 mm Itodpfsxgkdkex Aabsn Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 600 kg Tools Slots in storage 30 Max weight 8 kg Max tool diameter 125 mm/80 mm Max tool length 300 mm Type of tool holder BT 40 Media Chip conveyor Yes Additional Equipment Electronic Handwheel Chip conveyor Oil skimmer Emulsion flushing gun 2 x Hydraulic vice 25 x Clamping chuck BT40 This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530i, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, rotary table diameter: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: documentation/manual, Used 5-axis universal traveling-column machining center with Heidenhain TNC-530 CNC, swivel head, integrated rotary table. Isdpfoxixn Nox Aabotn

Condition: good (used), Year of construction: 2006, functionality: fully functional, The machine is in very good technical condition; testing can be arranged by agreement. Equipped with Fanuc CNC control, chip conveyor, and replacement screws. Ijdpfsxmvgqox Aabstn - Maximum swing over bed: 300 mm - Maximum swing over cross-slide: 230 mm - Maximum turning diameter over bed with upper turret: 230 mm - Maximum turning diameter over bed with lower turret: 230 mm - Maximum turning length: 600 mm - Maximum distance between right and left spindle faces: 980 mm

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Ijdpfxsxm Sxvo Aabstn Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Year of construction: 2013, operating hours: 8,935 h, Serial number: 4084xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16505 - Is certified or delivered certified Itodpfjvg Nq Hsx Aaben - 8,935 hours - 112,400 km - Good tires - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light - 360 kW motor - Radio/cd - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935

Condition: ready for operation (used), Year of construction: 2022, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 570 mm Z-Axis Movement 510 mm Tools Number of index 30 Type of tool holder ISO 40 Additional Equipment Inner Cooling: 13 bar This 3-axis DOOSAN DNM 5700 vertical machining center was manufactured in 2022. It features a Fanuc i-Series control, a spacious 1300 x 570mm table, and a tool magazine with 30 slots. The spindle speed reaches up to 12,000 rpm, supported by inner cooling at 13 bar. Consider the opportunity to buy this DOOSAN DNM 5700 vertical machining center. Contact us for more information about this machine. Itsdjxpkqcopfx Aabon Application Types Milling

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1915 mm Measurements depth 4068 mm Measurements height 2102 mm Machine weight 5500 kg Control Unit Brand SIEMENS Model Sinumerik 828D Itodpfx Aaoxfcr Robon Main Drive Spindle speed range 2800 Spindle motor power 35 kW Number of axis 2 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 830 mm Z-Axis Rapid Traverse 30 m/min Tools Number of index 10 Media Chip conveyor Yes Additional Equipment Chip conveyor This DOOSAN Puma GT3100 was manufactured in 2020. It features a main spindle with a standard chuck size of 300 mm, a maximum turning diameter of 481 mm, and a length of 755 mm. The machine includes a Siemens Sinumerik 828D control, a chip conveyor, and a tailstock. Ideal for precision turning, it offers rapid traverses of 24x30 m/min and a spindle speed up to 2,800 rpm. Contact us for more information about this machine. Application Types Turning