Used Doosan Generator for sale (337)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 170 h, load capacity: 7,000 kg, lifting height: 3,500 mm, free lift: 205 mm, fuel type: gas, mast type: standard, construction height: 2,745 mm, fork length: 1,500 mm, empty load weight: 10,700 kg, total length: 3,700 mm, drive type: Treibgas, construction width: 2,110 mm, LPG forklift Load center: 600 Mast type: Standard Technical condition: very good Kjdpfx Ajxp S Eujabonc Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, roof cover, front windscreen, load guard, twin tires.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 530 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,145 mm, power: 42 kW (57.10 HP), fork carriage width: 1,190 mm, fork length: 1,200 mm, empty load weight: 4,850 kg, drive type: Diesel, Diesel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, 3rd valve, 4th valve, half-cabin, full free lift, twin tires, Knedpfxjukxcvs Aabsc

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: MV0098-000226, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 56 m/min, nominal power (apparent): 16 kVA, controller manufacturer: FANUC, workpiece weight (max.): 200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 200 h, number of slots in tool magazine: 21, tool diameter: 200 mm, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in perfect condition, with only 200 spindle hours since new. It never had a collision. It is possible to inspect the machine under power and verify its geometry. Knjdjxpuwmopfx Aabsc Included in the package: 3D probing system Tool measurement probe (the stylus is damaged — we can replace it) Through-spindle coolant (TSC) Chip conveyor 21-tool magazine

Condition: used, Year of construction: 2016, operating hours: 9,085 h, Hydraulic S. W. system from 2018, Rototilt R8 suitable for units from 28,000 to 32,000 kg, grab and hammer function, boom approx. 3,000 mm, air conditioning, surcharge for trenching bucket. Vehicle may have advertising stickers and/or lettering applied. Price without Rototilt and without bucket!! Our offer generally does not include a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may have advertising stickers and/or lettering applied. Our general delivery and payment conditions apply. We are happy to provide a financing or leasing offer for this item. Please contact us! Kedpfx Aevy Rideabonc

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,105 mm, Tooling package  Chip conveyor Samchully 3 chuck 400 mm with jaws Max. turning Ø: 790mm X-Axis: 352mm Z-Axis: 1105mm Spindle bore: 116.5mm Speedrange: 2000Rpm Spindle power: 37kW Knodpfswyun Aox Aabec ATC / revolver: 10 Speed live tools:4000Rpm Power live tools:25kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 6Mk Stroke pinole: 120mm Quill Ø: 120mm Workpiece load: 1700 Length: 4600mm Width: 2056mm Height: 2195mm Weight: 11050kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,000 h, load capacity: 7,000 kg, lifting height: 3,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, gearing type: hydrostat, fork length: 2,500 mm, fork width: 2,000 mm, fork thickness: 65 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25-15, rear tire type: superelastic tires (black), rear tire size: 8.25-15, overall weight: 18,600 kg, empty load weight: 11,600 kg, total height: 2,480 mm, total length: 3,900 mm, total width: 2,700 mm, color: orange, Equipment: all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are industry specialists! 💼 We offer high-quality forklifts, providing proven machines in excellent condition. Kedpfxoxpr Ups Aabenc ✅ Check out our range and find the perfect equipment for your business! 🔹 Featured in this listing: DOOSAN 70 – 7000 KG – DUPLEX 3000 mm – Year 2013 – 2000 HOURS – DIESEL – UDT CERTIFIED – CONDITION 5/5 🛠️ The forklift is in excellent technical condition and ready for immediate operation. 📊 Key Features and Technical Specifications: Model: DOOSAN 70 Year of manufacture: 2013 Lifting capacity: 7,000 kg Operating hours: 2,000 h Mast type: Duplex Lifting height: 3,000 mm Drive type: Diesel Load center: 600 mm Total weight: 11,600 kg 🔩 Tyres: Solid, superelastic, in good condition Front tyres: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread Rear tyre: Superelastic – 8.25-15 / 6.50 – 🟢 100% tread 📏 Dimensions: Max height (mast lowered): 2,500 mm Overall height: 2,480 mm Overall length: 3,900 mm Overall width: 2,100 mm Fork length: 2,500 mm Fork width: 200 mm Fork thickness: 65 mm Fork positioner width: 2,700 mm ⚙️ Equipment: 💡 Lighting 🛡️ Enclosed cabin 🥾 Heavy-duty pallet forks 🔄 Hydraulic fork positioner ↔️ Side shift 📦 This forklift is an excellent choice for demanding applications where strength, stability, and precise handling are essential. 🚚 Available for immediate delivery — ask us for a transport quote! 📞 Contact us today and secure your machine!

Condition: used, Year of construction: 2017, Doosan Puma GT3100M year 2017 Kedpfjxggktex Aabenc Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: 376 mm Turning length: 1245 mm Main spindle: Belt-driven spindle Maximum spindle speed: 2800 rpm Maximum power: 22 kW Maximum torque: 1124 Nm Bar capacity: 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 12-station turret BMT65 turret head Travel in X/Z axes: 260/1350 mm

Condition: used, Year of construction: 2004, operating hours: 9,340 h, bar passage: 65 mm, chuck outer diameter: 315 mm, TECHNICAL SPECIFICATIONS Max. turning length: 760 mm Max. turning diameter: 330 mm X-axis travel: 250 mm Y-axis travel: ±50 mm Z-axis travel: 830 mm B-axis travel: 830 mm Main spindle speed: 5,000 rpm Sub spindle speed: 6,000 rpm Bar capacity: Ø65 mm Tool stations: 12 MACHINE DETAILS Weight: 5,500 kg Cutting hours: 9,389 h EQUIPMENT Chip conveyor Tool measuring probe LNS Servo 2 bar feeder Additional accessories as shown in photos A robust and precise CNC lathe, ideal for demanding production environments. Delivers consistent performance, high accuracy, and efficiency for both small and medium-sized batch work. Knjdpfxjxp E H Es Aabec Please verify all technical details with the seller.

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC Control Spindle Hours: 8,541h Technical Details Travel over Slide: 900 mm Turning Length: 3,200 mm Travel over Bed: 1,030 mm Standard Turning Diameter: 750 mm Spindle Bore: 110 mm X Stroke: 471 mm Z Stroke: 2,100 mm Rapid Feed - Longitudinal/Transverse: 15/20 m/min Spindle Speed: 3,000 rpm Spindle Motor: 45 kW Turret: 12/6 BMT 85 Electric Motor: Tools: 7.5/5.7 kW Driven Speed: Tools: 3,000 rpm Total Power Requirement: 62.2 kVA Machine Weight: Approx. 22 t Dimensions: 7,357 x 2,710 x 2590 mm Accessories: 12-position turret for driven tools Hydraulic tailstock Sandvik Capto C6 tool holders – 4 pcs Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm) Kodpfx Aaswqpn Eobsnc

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement Knsdpfxsxnr Nko Aabec X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes and Milling function with the C axis. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Application Types Turning

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW Knedpfxjxn Amto Aabec max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Kedpoxmv U Ijfx Aabjnc 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2022, Year of manufacture: 2022 New FANUC control 12,000 rpm 2x Renishaw probes BT 40 Travel (X / Y / Z) mm: 770 / 410 / 510 Knodpoxggciofx Aabsc Table mm: 920 x 410 Max spindle speed r/min: 12,000 Tool magazine: 30 positions NC System – DN SOLUTIONS Fanuc i Plus

Condition: good (used), power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 7,835 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: DC13 Top speed: 40 km/h Empty weight: 22.930 kg Functional Bucket capacity: 4,5 m³ CE mark: yes Knsdpfx Aaoxprqqjbsc Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCWLECJM10066 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 266 l/min Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 9,244x3x3,66 Production country: KR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: excellent (used), Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, Fanuc control, commissioned in 2023, two turrets, all stations driven, Y-axis on upper turret, sub-spindle, parts catcher, Hainbuch chuck, chip conveyor, short bar loader, accessories. Knjdpfx Aexnpcuoabsc

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Lithium-ion battery. Perfect forklift condition We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp in French Kjdpfx Aasxpn Skebjnc ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: used, Year of construction: 2019, operating hours: 5,270 h, Serial number: D1N0DA30AK074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21136 Specifications: Model year: 2019 Hours: approx. 5,270 Power: 270 kW / 375 hp Drive: 6x6 Kodpfxew Rkcps Aabenc Tires (see photos) Road registration (white plates) High tailgate Central lubrication Reversing camera LED work lights Radio / CD Air conditioning / AC Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Operating weight: 24,600 kg Max payload: 26,825 kg Description: 2019 Doosan DA30 articulated dump truck.The machine is equipped with central lubrication, high tailgate, and a reversing camera.It has been under a service agreement and is well maintained.Ready for delivery on short notice. HK: 375 Hours: 5270 Own weight: 24600

Condition: used, Year of construction: 2020, operating hours: 2,442 h, 2020 | Doosan DX140LCR-5 with PowerTilt OQ65 quickcoupler (without bucket) | Used Tracked Excavator | 2442 hours 📍Location: Germany, München 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 95000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 84 inspection points 80 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Condition is good for age, ready to work, but U/C rubber pads are worn and chiped and some other smaller maintenance needed 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37601 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Knjdpfexmlxcsx Aabjc 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, DOOSAN PUMA 240MC Control: Fanuc 21i-TB Year of manufacture: 2007 Spindle bore: 76 mm Max turning length: 501 mm Kjdpfx Aoxgf T Toabenc

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 18000 kg Control Unit Brand FANUC Model FANUC 18I TB Main Drive Spindle speed range 2000 RPM Spindle motor power 30 kW Tool taper ASA A2-11 Number of axis 2 Movement X-Axis Movement 380 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 20 m/min Turret Number of turrets 1 Additional Equipment Holders for External Turning: HO10-25RL (4 pcs) Holders for Face Turning: HF10-25RL (2 pcs) Holders for Internal Turning: HB10-50N (4 pcs), HB10-40N (2 pcs) Reduction Sleeves: BS 40-10, -12, -16, -20, -25 (2 sets) Knsdpfoxirkqex Aabec This DOOSAN V740T vertical turning machine was manufactured in 2005. It features a maximum swing diameter of 800 mm, turning diameter of 740 mm, and a turning length of 760 mm. The main spindle supports a rotational speed up to 2000 RPM with a motor power of 30 kW. It includes a 12-position turret and rapid traverse rates of 20 m/min for both X and Z axes. If you are looking to get high quality turning capabilities consider the DOOSAN V740T machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: used, lifting height: 4,650 mm, Year of construction: 2015, operating hours: 8,191 h, Year of manufacture: 2015 Empty weight: 8.500 kg Knodpfxjxqfhro Aaboc Digging depth: 4.175 m

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Width: 299 cm Knodow Ruyxepfx Aaboc Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 6,500 h, Year of manufacture: 2017 Empty weight: 8.500 kg Digging depth: 4.175 m Knodpfxjxqfhlo Aaboc

Condition: used, Year of construction: 2017, operating hours: 7,710 h, Year of manufacture: 2017 Knjdsxqfcpopfx Aabjc

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 5,420 h, Year of manufacture: 2014 Empty weight: 14.400 kg Knedpexqfcijfx Aaboc Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3