Used Dorstener Wire Works for sale (52,865)

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2443818, load capacity: 454 kg, lifting height: 13,610 mm, platform length: 910 mm, platform width: 2,440 mm, overall weight: 8,623 kg, transport length: 9,470 mm, transport width: 2,480 mm, transport height: 2,590 mm, fuel type: diesel, color: blue, Equipment: UVV, Technical specifications Year of manufacture: 2018 Engine: diesel Working height: 15.61 m Platform height: 13.661 m Bwjdpjyqzrujfx Antow Platform dimensions (L x W x H): 0.91 m x 2.44 m x 2.59 m Overall dimensions (L x W x H): 9.47 m x 2.48 m x 2.59 m Load capacity: 454 kg Slewing range: 160° Basket arm length: 1.52 m Driving speed: 1.1 - 3.28 km/h Climbing ability: 45% Weight: 8,623 kg Overall condition: typical used condition, UVV

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories Bwjdpsi A I Hfefx Antew - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 Bwodpfx Aeixxwmontew - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Clear text display Press force monitoring Wire straightening device Bosch wire stripping devices Holder and brush motor with integrated tool W32/1-32 Soundproof cabin Bwodpfoh I Nrqex Antew Former for CU wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 RPM Press force / stamping unit: 200 kN Longitudinal feed: 250 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, machine/vehicle number: 9208, mileage: 1,93,180 km, power: 107 kW (145.48 HP), first registration: 05/2018, fuel type: diesel, maximum load weight: 460 kg, overall weight: 3,500 kg, tire size: 225/65r16c, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, onboard computer, Special features: - ABS, ASR - Air conditioning - Radio CD, AUX, BLUETOOTH - Cruise control - Airbags - Power steering - ISRI driver's seat with armrest - Electric windows - Electric immobilizer - Central locking with remote control - On-board computer - 4 new tires - Ladder holder up to 6m Superstructure: KLUBB K32 aerial work platform - Working height: m - Lateral reach: m - Platform for 2 people, up to 200 kg - Rotation: 360° - 2 x A-frame outriggers - Remote control for the platform - Engine start/stop function - Electric emergency pump - Hour meter - 220V connection in the platform - Converter 12V - 230V - 2Kw sine wave KLUBB K32 aerial work platform from the French manufacturer, mounted on a Renault Master - the hydraulic pump with magnetic clutch is driven by a V-belt connected to the vehicle engine. An optimal product for telecommunications and electrical companies, as well as municipal utilities and painting companies. All functions of the lift are operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV (technical inspection) and UVV (accident prevention regulations) are included free of charge. Additional equipment such as a trailer hitch, lighting, shelves, and more are available upon request. ACR-Juretzki Commercial Vehicle Trading GmbH – Your reliable partner for used commercial vehicles. All vehicles offered by us are the property of ACR-Juretzki Commercial Vehicle Trading GmbH. The presentation is exclusively done with original photos taken directly in our facility – this guarantees full transparency regarding the actual condition of the vehicle. Before sale, our vehicles undergo a comprehensive refurbishment in our own workshop – including mechanics, bodywork, and paintwork. They are thus optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good, control is better: Upon request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our service offer for you: - Delivery of your vehicle to the location of your choice - Complete handling of export formalities, including export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment on request Bodpeiwimijfx Antjww Are you looking for something specific? If you cannot find a suitable vehicle for your company in our inventory, please contact us – we will be happy to help. We are available at any time for technical details, additional photos, or a personal consultation. All prices quoted are net prices. The content of our website has been created with the utmost care and is regularly updated. However, it serves exclusively for general information and does not replace individual advice. Only the information in the purchase contract is binding. Subject to change, errors, typos, and prior sale.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2019, operating hours: 7 h, For sale: a scarcely used personnel lift. Working height: 9.7m, load capacity: 160kg. It can be transported in a lying position and fits into a standard van; one person can load it onto the vehicle. Dimensions: 0.74 x 1.24 x 1.97. Bwodpfxez Ihzgo Antew

Year of construction: 2006, condition: used, X-axis: 570mm, Y-axis: 370mm, Z-axis: 350mm, working area dimensions: 1050x720mm, U/V-axes: 120x120mm, taper angle: ±20°, max. workpiece dimensions: 770x520x340mm, max. workpiece weight: 1t, wire diameter: 0.15-0.3mm, wire tension: 3-23N, max. wire feed: 420mm/s, floor-to-table distance: 995mm, dielectric tank external dimensions: 725x2550mm, weight empty: 600kg, capacity: 800l, connected load: 15kVA, control: Sodick LQ33W, length: 2600mm, width: 2740mm, height: 2390mm, machine footprint: 3700x3900mm, machine weight: 4.6t, cutting time: 13,775h, machine-on time: 62,484h, with Super-Pika, wire chopper, SMS box with wall-mounted enclosure, an on-site inspection is possible. Bjdpfx Anez Ekdfjtsww

Year of construction: 1995, condition: used, Wire diameter: 0.4-1.5mm, control: MCS SYSTEM V, an on-site inspection is possible. Bodsz E Nrhspfx Antoww

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Bwodpfxsz Sr Nqo Antew

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; Bodotz H Egopfx Antsww * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: new, material width 1015 mm material thickness 1 mm speed von Hand weight 240 Kg dimensions 1420 x 600 x 750 m Bsdpfx Aoupxdksntoww

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM Bwedpfx Anoux Si Hstow The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: good (used), Included in the scope of delivery: 01x Workbench, used Subframe dimensions: approx. 1,340 x 700 mm Bwedpfjx Itdlex Antjw Height to top edge of worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm Comprising the following for EACH unit: 02 x Workbench stands, used Manufacturer: Dexion Type: P 90 Material color: sendzimir galvanized Profile dimension: 100 mm Including cross and diagonal braces, base plates The stands are pre-assembled (bolted truss construction) 900 mm high 700 mm deep 04 x Workbench beams, used Racking system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO089|2 Clear span: 1,140 mm 08 x Dexion safety pins, used Type: Speedlock P90 Material color: sendzimir galvanized Head Ø: 13.58 mm Pin Ø: 5.92 mm Weight per piece: 0.018 kg Chipboard panels, 2nd grade, used Thickness: 38 mm Dimensions: 01x 1,400 x 1,000 mm 01x 1,120 x 700 mm Surface: possibly coated (single piece) 08 x Wing screws with countersunk head, new Dimensions: 6.3 x 70 mm Note: - Workbenches are picked unassembled; - Workbench stands are pre-assembled; - The production lead time is usually approx. 3 - 5 working days. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If shipping or further transport is required, additional costs will apply, which can be individually requested from us depending on the delivery location and scope.

Condition: used, functionality: fully functional, Year of construction: 2004, lifting height: 9,000 mm, Brand: Genie Model: AWP-30S Year: 2004 Bsdpfox U Sglox Antoww Serial no.: 05-32340 Portable personnel lift with stabilizers Maximum platform lift height: 9.02 m

Condition: used, mileage: 81,168 km, power: 110 kW (149.56 HP), first registration: 05/2019, fuel type: diesel, overall weight: 7,000 kg, wheelbase: 4,100 mm, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, differential lock, immobilizer system, onboard computer, power assisted steering, trailer coupling, Special features - New windscreen - 3-seater - Electric windows - Cruise control - Radio - ABS / ASR - Height-adjustable and reach-adjustable steering wheel - Electrically adjustable and heated mirrors (L/R) - Differential lock - Manual air conditioning - Power steering - Electronic immobiliser - Central locking with remote control - On-board computer - Tow bar Bjdeywg Ivopfx Antoww - Twin tyres - Reversing camera Superstructure France Elevateur 172 TPFcc - Working height: 17.00 m - Basket floor height: 15.00 m - Maximum outreach: 9.00 m - Slew angle: 400° - Setup inclination: 5% / 15% - Steel boom system with 2 extensions - Internal energy supply routing - Electro-hydraulic controls - Plastic work basket (1000 V insulation) - Indicator light for transport position in the driver’s cab - Ground controls (5 m cable) - Operating hours counter - Emergency pump - Cab-activated hydraulic pump - Basket arm slew angle 140° - Audible tilt warning system - Rear platform with integrated underrun protection - 2 hydraulic outriggers - Engine start/stop from work basket - LED strobe lights - 230V socket in basket - 2 x 60° basket rotation - Ladder holder - 2500VA power inverter - Basket dimensions (L/W/H): 1300 x 780 x 1150 mm The Iveco Daily with the France Elevateur 172 TPFcc is an indispensable tool for telecommunications, electrical work, lighting maintenance, municipal services, and painting tasks. Thanks to the compact design of the vehicle and the precise control of the platform, this system is ideal for use in urban areas, construction sites with limited space, and jobs where high flexibility is required. Iveco Daily with access platform 172 TPFcc – your reliable partner for working at height! All platform functions are fully operational and have been checked by our workshop. The vehicle is ready for registration. German paperwork, TÜV, and UVV are included free of charge. Additional features such as tow bar, lighting, shelving, and more are available on request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles. All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. Our listings use only original photos taken directly at our premises, ensuring full transparency on the vehicle’s actual condition. Before sale, our vehicles undergo a comprehensive reconditioning process in our in-house workshop, covering mechanics, bodywork, and paintwork. They are optimally prepared for their next technical inspection. In addition, we guarantee the authenticity of all stated mileage. Trust is good, control is better: Upon request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – remote inspections are also possible. Our range of services for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, incl. export number plates - Custom financing and leasing options - Trade-in of your current vehicle - Installation of optional extras upon request For technical details, further photos, or a personal consultation, please feel free to contact us at any time.

Condition: used, Load capacity: 1000 kg Bodpfxoyk U Nmo Anteww Lifting height: 12 m

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, Equipment: cooling unit, documentation/manual, Special Offer – 5% Discount Available! EDM32 Wire EDM Machine Bwedpfey A N Ezsx Antow The EDM32 Wire Electrical Discharge Machine is a precision CNC machine designed for electro-erosion machining of electrically conductive materials. It is an ideal solution for toolmaking, mold manufacturing, and the production of precision components requiring high dimensional accuracy and excellent surface finish. The machine efficiently cuts complex profiles and intricate geometries in both single-piece and serial production. Its rigid construction and optimized machining parameters ensure reliable performance, excellent repeatability, and high productivity. The EDM32 supports taper cutting up to ±6°, allowing greater machining flexibility. It uses wire diameters from 0.12 to 0.25 mm, enabling highly accurate machining of demanding workpieces while achieving a surface finish of 1.6–2.5 Ra, minimizing the need for secondary finishing operations. With a maximum table load of 400 kg, the machine is capable of machining heavy workpieces without compromising precision. Main Features • High-precision wire EDM machining • Suitable for complex profiles and intricate geometries • Taper cutting up to ±6° • High machining accuracy and repeatability • Excellent surface finish • Stable machine construction • Low operating costs • CE certified Technical Specifications • Model: EDM32 • Table travel: 440 × 350 mm • Table size: 380 × 650 mm • Maximum cutting height: 400 mm • Wire diameter: 0.12–0.25 mm • Taper cutting: ±6° • Maximum cutting speed: 120–150 mm²/min • Surface roughness: 1.6–2.5 Ra • Machining power: 2 kW • Wire speed: 11 m/s • Maximum table load: 400 kg • Machine dimensions: 1650 × 1150 × 1700 mm • Machine weight: 1150 kg Applications • Mold and die manufacturing • Toolmaking • Precision metalworking • Production of complex and high-accuracy components • Prototype and serial production Transport and Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: Bwjdpfsy Auhzox Antsw * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: used, mileage: 81,168 km, power: 110 kW (149.56 HP), first registration: 05/2019, fuel type: diesel, overall weight: 7,000 kg, wheelbase: 4,100 mm, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, differential lock, immobilizer system, onboard computer, power assisted steering, trailer coupling, Special features - New windscreen - 3-seater - Electric windows - Cruise control - Radio - ABS / ASR - Height-adjustable and reach-adjustable steering wheel - Electrically adjustable and heated mirrors (L/R) - Differential lock - Manual air conditioning - Power steering - Electronic immobiliser - Central locking with remote control - On-board computer - Tow bar Bodpfx Ajv Nhp Hsntoww - Twin tyres - Reversing camera Superstructure France Elevateur 172 TPFcc - Working height: 17.00 m - Basket floor height: 15.00 m - Maximum outreach: 9.00 m - Slew angle: 400° - Setup inclination: 5% / 15% - Steel boom system with 2 extensions - Internal energy supply routing - Electro-hydraulic controls - Plastic work basket (1000 V insulation) - Indicator light for transport position in the driver’s cab - Ground controls (5 m cable) - Operating hours counter - Emergency pump - Cab-activated hydraulic pump - Basket arm slew angle 140° - Audible tilt warning system - Rear platform with integrated underrun protection - 2 hydraulic outriggers - Engine start/stop from work basket - LED strobe lights - 230V socket in basket - 2 x 60° basket rotation - Ladder holder - 2500VA power inverter - Basket dimensions (L/W/H): 1300 x 780 x 1150 mm The Iveco Daily with the France Elevateur 172 TPFcc is an indispensable tool for telecommunications, electrical work, lighting maintenance, municipal services, and painting tasks. Thanks to the compact design of the vehicle and the precise control of the platform, this system is ideal for use in urban areas, construction sites with limited space, and jobs where high flexibility is required. Iveco Daily with access platform 172 TPFcc – your reliable partner for working at height! All platform functions are fully operational and have been checked by our workshop. The vehicle is ready for registration. German paperwork, TÜV, and UVV are included free of charge. Additional features such as tow bar, lighting, shelving, and more are available on request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles. All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. Our listings use only original photos taken directly at our premises, ensuring full transparency on the vehicle’s actual condition. Before sale, our vehicles undergo a comprehensive reconditioning process in our in-house workshop, covering mechanics, bodywork, and paintwork. They are optimally prepared for their next technical inspection. In addition, we guarantee the authenticity of all stated mileage. Trust is good, control is better: Upon request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – remote inspections are also possible. Our range of services for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, incl. export number plates - Custom financing and leasing options - Trade-in of your current vehicle - Installation of optional extras upon request For technical details, further photos, or a personal consultation, please feel free to contact us at any time.

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: D12L/8273, Offer Number: D12L/8273 Machinetype: wire nail press Make: WAFIOS Type: N5 Constr. year: 1982 wire diameter: 2,2-4,2 mm nail length: 13-105 mm capacity - pieces/min: 430 Location: In our warehouse Bwedpfx Answi Suretow

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm Bsdpfx Anjwi S Ixsteww finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D12L/7525, Offer Number: D12L/7525 Machinetype: wire nail press Make: WAFIOS Type: S40 Bodpfewi S Rgex Antjww Constr. year: 1955 diameter range: 0,8-1,8 mm nail length: 10-40 mm output - pieces/min: 550 Location: In our warehouse

Condition: used, Year of construction: 1963, functionality: fully functional, machine/vehicle number: D06L/7457, Offer Number: D06L/7457 Machinetype: wire and strip bending machine Make: BIHLER Type: RM25 Constr. year: 1963 dia. range: 0,5-2,5 mm width of band: 50 mm feeding length: 170 mm Bsdpfx Anowi S Rtstsww number of slides: 5 punching power: 5 to output - pieces/min: 225 Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8171, Offer Number: D12L/8171 Machinetype: wire nail press Info: with assembly device for head plates Make: WAFIOS Type: S110 Bwsdpfx Anowi Tk Ujtow Constr. year: 1970 wire diameter: 2,2-3,8 mm nail length: 13-110 mm capacity - pieces/min: 350 Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Bsdpfxswi Ubno Anteww Constr. year: 1970 diameter range: 2,2-3,8 mm nail length: 13-110 mm output - pieces/min: 350 Location: In our warehouse