Used Dosing Station for sale (6,265)

Condition: good (used), Year of construction: 2010, total width: 1,100 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 300 kg, For Sale: Dosing Unit from Technology Unlimited Hjdpfxozvdgqo Ab Ijnt - Type: Dosing Unit - Brand: Technology Unlimited - Year of manufacture: 2010 - Includes load cells - Pneumatic valve - Vibration sensor Overall dimensions: 1100 mm x 1200 mm x 2300 mm Ready for transport

Condition: good (used), Matcon IBC Discharge cone Stainless steel, 1000L, IBC discharge stations, 4 in stock Hjdstxrb Ajpfx Ab Ient

Condition: used, Year of construction: 2023, 4-post lift Hnjdpfxozy Hzxj Ab Iet drive-through design!!! without wheel alignment equipment center lift, 4 rocker plates, removable

Condition: used, Year of construction: 1998, Velcorin dosing system for the cold sterilisation of beverages during bottling. Velcorin is drawn from a storage tank and injected into the product stream via a dosing pump. System out of service. Ideal as a source of spare parts. Additional title: Cold sterilizing Capacity: 7200 l/h Maximum permissible dosing rate: 20 ml/hl Features: Velcorin storage tank; compressed air connection; dosing pump (Cibus 32 lubricant); flow/volume measurement module; pneumatic control block; centrifugal fan; control panel with buttons and warning lights; various valves, actuators and sensors Hodpfx Abszty S Ds Ient

Condition: used, Year of construction: 2008, Manufacturer: Dumek Model: DV 1100 Year: 2008 Type: Volumetric dosing unit Hnodjzv Uzrepfx Ab Iet Dosing technology: volumetric piston pump Number of filling heads: 1 Outer diameter of the filling head: 12 mm (8 mm also in stock) Speed control: pneumatic Type of product : Liquid: aqueous / viscous Semi-liquid: gel / paste Manual or semi-automatic operating mode Adjusting the volume rate: cubic centimetres per manual handwheel Minimum dosage range: 20 mL Maximum dosage range: 1100 mL Hopper capacity: 50 L Product support with height-adjustable Operating video available on request Dimension : 112 x 50 x 175 cm Weight : 90 kg

Condition: ready for operation (used), * Brand: Kleemann Hedpfx Aszu Nzkob Isnt * Type: dosing belt conveyor with hopper * A-A length: 8300 mm, beltwidth= 800 mm. * Driving : 7,5 kW gearbox. * Dim. Hopper: 6000 X 1800 X 1150 mm.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Hodpfx Abszu Irno Ient Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use.

Condition: used, Metering pumps, including valves, 20 pieces. Hnodpfx Abozdpu Ns Ist

Condition: reconditioned (used), Year of construction: 2016, Sanitary gate for hand disinfection Automatic hand disinfection station with a turnstile. The turnstile automatically dispenses disinfectant onto the hands. It is activated touchlessly using photocells. The sanitary gate is made of high-grade stainless steel 1.4301 and performs the following functions: Hand disinfection One-way traffic control Technical data: Material: Stainless steel 1.4301 Hsdezvrrbopfx Ab Ient Dimensions: 860 x 860 mm (W x D) Weight: 40 kg Power supply: 230 V Designed for hand disinfection Disinfectant spray activated touchlessly using photocells Equipped with a turnstile that allows passage only after the required actions have been performed. Light signaling (red-green) High throughput In the event of a power failure, the turnstile rotates freely in both directions – in compliance with occupational safety regulations. Video showing how it works:

Year of construction: 2014, condition: used, Capacity / kg/h / type / material / Two-component (2K) adhesive dispensing and mixing system – FERE / Walther Pilot For sale: a used, fully automatic 2K adhesive dispensing and mixing system. Manufacturer: FERE Dosier- und Klebesysteme GmbH Year of manufacture: 2014 Material pressure: up to 6 bar Control voltage: 24 V DC Operating voltage: 3 × 400 V / N / PE Dispensing system: Servo-electric drive Includes Walther Pilot pressure vessel and pneumatic cylinders The system was used for dispensing and mixing 2K adhesives on trim strips and is also suitable for similar applications. Hnjdszhxnaspfx Ab Iot Used condition Sold as shown Viewing possible by appointment Assistance with loading available Please contact us if you have any questions or are interested.

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm Hedpfx Aszhnafob Isnt - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: new, Year of construction: 2026, Label roll: 250 mm Height of dispensing edge from floor: adjustable from 50 to 100 cm. Hnodpfx Abjzx Dp Rs Ist Mobile on wheels

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet chassis frame with bogie and steering wheels vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Hjdpfx Aecx R D Hsb Ijnt Power: 1,1kW Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Year of construction: 2019, condition: like new (used), Details on request Hodpfx Aeflc E Ajb Iont

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Main components • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. Hnodpfxszvc Dus Ab Iot • Programmable automatic positioning. • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: new, With filters 20 pieces 2 motors 15 kW Capacity 36,000 m³.h 400 V x 3 phases x 50 hrs 3 fan speeds Approximate dimensions: Hsdovu Sqljpfx Ab Isnt 5 m 3 m x 2 m Serial number: 20-1-267 Year of manufacture: 2020

Condition: excellent (used), 1) Main Welding Station – ACR6-P Type: Rotary welding station for narrow groove (Narrow Gap) Axes: 4-axis rotary system Control: Beckhoff CNC / HMI Weld monitoring: Stenning Video Weld Monitor System Approximate footprint: approx. 10,000 mm × 6,500 mm 2) Welder / Power Source Miller XMT 456 CC/CV — backup unit Type: CC/CV welding power source (MMA / MIG / FCAW / TIG – depending on equipment) Type: Multiprocessing Power supply: 400 V (via attached transformer) 3) Power Transformer Voltage: 400 V Dimensions: 970 × 760 × 1,200 mm (H) Application: powering machines in the welding station 4) Power Sockets Quantity: 3 × 415 V Mounting: on aluminium frame 5) Welding Lathe Dimensions: 3,000 mm × 1,200 mm × 780 mm (H) Purpose: rotary positioning of workpieces for circumferential/narrow gap welding Hnjdsx Upf Sepfx Ab Iet 6) Heavy Duty Work Table Dimensions: 900 mm × 600 mm × 600 mm (H) Design: robust, industrial-grade 7) Curtains and Guarding System Welding curtains: included KEMPER system: adjustable, 50 kg, wide range of adjustment

Condition: used, Additional information based upon request including photos. Hsdpfx Aszuwqmeb Ient

Condition: like new (used), Carruthers Six-pak 46000 Six station volumetric filler Serial: 46025 Hnjdpfx Abjkl Hrqs Iet Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Hnedpfxjzvlk Dj Ab Ijt Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph

Year of construction: 1999, condition: good (used), gravimetric dosing unit with 2 hopper stations Hodsd D Nmxjpfx Ab Ient and total 4 components with origin control cabinet, touch panel and docu

Condition: excellent (used), The minimum order quantity is 8 stations, with the price per station being €4,000. The stations are new. Hodpfx Aswxv Nlob Ijnt The line consists of stations for profiling shafts with a diameter of 50 mm and an 8 mm keyway. Material feed thickness ranges from 0.4–2.5 mm, with a strip width of 320 mm. There are 8 stations per table, driven by a 15 kW motor with a reduction gearbox. Four sets of stations are mounted on robust steel beams measuring 45 x 700 x 1,500 mm. This allows for quick changing of rollers fitted with various spare modules for finished profiling station segments. This configuration includes two table segments with 8 stations each, providing a total of 16 profiling stations. The specified price applies per set of stations on a given table. These tables can be configured and assembled according to the required profile—e.g., with 8, 16, 24, or 32 stations. The table features a strip guide and a turk's head, a straightening head, and a profile output device before the guillotine shear, a flying saw, or a fixed take-off table. We offer various configurations of such solutions for these tables. By exchanging the shafts, we can achieve a maximum input width of 550 mm.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, overall weight: 14 kg, input voltage: 24 V, type of input current: DC, Automatic torch cleaning station with a rotating reamer. The torch head is sprayed with anti-spatter fluid in a closed spray chamber. This reduces the consumption of anti-spatter fluid and prevents contamination of other equipment. The device is equipped with a wire cutter. Hedpfx Aezuc Epob Iont

Condition: used, Vibratory hopper, dosing hopper, storage bunker, linear vibratory feeder, sorting device Vibratory bowl feeder, spiral feeder / vibratory feeder Vibratory bowl, screw feeding with vibratory feeder for screwdriving technology Hsdpfx Abey E T Dte Ijnt Feeding system, feed device Manufacturer: MÜLLENDERS Type: MLF-G2 Year of manufacture: approx. 2000 Hopper capacity: approx. 4 liters Vibration frequency: 6000 Hz Control voltage: 24 volts DC (an external power supply is required) Mains connection: 230 volts, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24 VDC power unit). - REO control unit, type Reovib RS6 439-459, for adjustable vibration speed - Stainless steel hopper, hopper open to the rear - Base frame made from aluminum profile system Required space L x W x H: 380 x 210 x 700 mm Weight: 20.5 kg Good condition

Condition: used, machine/vehicle number: 247, mileage: 2,29,530 km, power: 74 kW (100.61 HP), first registration: 07/2007, fuel type: diesel, empty load weight: 1,435 kg, maximum load weight: 540 kg, overall weight: 1,975 kg, tire size: 205/55 r16, axle configuration: 2 axles, color: silver, gearing type: mechanical, emission class: euro5, Equipment: ABS, airbag, fog lights, trailer coupling, CD player power steering Electric windows Soot particle filter Black fabric interior Hjdpfxequ Rnks Ab Iont air conditioning Steel rims 5 seats cubic capacity 2.000 cm³ Errors excepted