Used Double Cross for sale (16,138)

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm Hjdevwglvopfx Adwsng spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm Hnodpfx Aox S Rx Ijdwjg passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hnjdpjx Sr Evsfx Adwsg Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 90 mm, cutting width (max.): 165 mm, Equipment: saw blade guard, OMGA T50.350 Crosscut Mitre Saw Specification: • Manufacturer: OMGA • Model: T50.350 • Blade diameter: 350 mm • Saw motor: 2.2 kW • Max dimensions of cut element at right angle: 90 x 165 mm (height x width) • Protective guards on the saw for operator safety • Extraction nozzle diameter: 80 mm • Cutting angle adjustment: +/- 45 degrees • Overall dimensions: 75 x 62 x 76 cm (length x width x height) Additional information: Hnedpfxjx S N D Nj Adweg • The machine is in very good technical condition, ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to power up and test the device on site

Condition: used, overall weight: 221 kg, total length: 400 mm, total width: 400 mm, total height: 540 mm, Cross tooling column with Gressel Mounting holes 4 Pitch fixing holes 320 mm Length 400 mm Width 400 mm Height 540 mm Weight 221 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Hnsdpfx Adox Ttzzewjg Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description of 185x100 mm Cross Table Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is a pitch, which simplifies telling the X,Y axes position of the table Hodpjvu Tqyjfx Adwjng 2.5mm/0.02mm vernier

Condition: new, Year of construction: 2026, Tabletop version -High performance -Belt grinding attachment height adjustable from 0-90° -Maximum usable surface grinding surface -Belt adjustment with fine adjustment Combined belt grinder/sander -Longitudinal stop for material guidance -Perfectly balanced and low-vibration -Double-sided connection for dust extraction Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop -1 standard sanding belt (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester Hedshhiaajpfx Adwong -Connection cable with CEE plug Additional charge for special equipment/options: - Machine stand, emergency stop push button, brake, and extraction system / €2,260 (Item 330.370) - Machine stand, emergency stop push button and brake / €1,030 (Item 330.365) - Machine stand with water immersion tank / €360 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1976, wire diameter range: a) single wire: 2,2 - 3,8 mm b) double wire: 2,2 - 3,4 mm Hjdpfxed Im Nuo Adwsng nail length: 10 - 80 mm output: 300/600 nails/min.

Condition: used, Year of construction: 1959, Manufacturer: DANLY, Model: S4-800-132-72, Year of manufacture: 1959, Max. pressure: 800 t, Table clamping surface: 3,350 x 1,830 mm, Ram clamping surface: 3,350 x 1,830 mm, Ram stroke: 610 mm, Ram adjustment: 508 mm, Strokes per minute: 12 - 16, Sliding table, Table cushion pressure: 11 - 113 t, Table cushion stroke: 203 mm, Ram cushion stroke: 152 mm, Press control with operator panel, discharge handling robot (manufacturer), Strothmann robot (not functional), control and switch cabinets, accessories Hodpfsx R Eftex Adwong +++ Attention: Machine is part of an online auction! +++

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 90 mm, cutting width (max.): 170 mm, Equipment: saw blade guard, OMGA T50.350 Crosscut Mitre Saw 2.2 kW Specification: • Manufacturer: OMGA • Model: T50.350 • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum dimensions of workpiece at right angle: 90 x 170 mm (height x width) • Safety blade guards for operator protection • Integrated internal sawdust extraction • Mitre cutting adjustment +/- 45 degrees • Overall dimensions without tables: 650 x 70 x 160 cm (L x W x H) • 2 extension tables included, each 17 x 100 cm Hnodex S Nt Dopfx Adwsg Additional information: • The machine is in good technical condition, ready for immediate use • The photos show the actual condition of the item offered for sale • On-site inspection and testing of the machine is possible

Condition: used, overall weight: 208 kg, total length: 400 mm, total width: 400 mm, total height: 470 mm, Erowa ER-051145 FL-AA0324 Double side tooling column with Erowa Mounting holes System Erowa Length 400 mm Hedpfx Ajx Ttzbsdwsng Width 400 mm Height 470 mm Weight 208 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with screw cover, sliding guides made using the "dovetail" method significantly improve the stiffness of the table and enable the elimination of play in feeds. Hsdpfxevu Tn Ss Adweng Description of the cross table The cross table is solidly made of high-quality materials. Ideally supports work on drilling machines, milling machines, etc., thanks to which we achieve precise positioning when boring or drilling. Cross table equipped with a swivel base with a 360°/3mm pitch. Screw cover prevents chips from entering the feed working mechanism. An additional advantage of the table is a strip scale that facilitates constant viewing of the table's position in the X and Y axis Nonius 4 mm/0.02 mm

Condition: new, Year of construction: 2026, Description Double-sided grinding machine TS 200 SD P with extraction system, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels Hsdpfor Eqzfjx Adwong 12-month warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 - Speed (rpm): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories. Hodpsx Ncu Nofx Adwong

Condition: used, Year of construction: 1986, Make: MÜLLER, Model: ZE400-20.24.1, Year of manufacture: 1986, Machine No.: 498601, Max. pressure: 400 t, Clamping area (table): 2,000 x 1,300 mm, Clamping area (ram): 2,000 x 1,300 mm, Installation height min./max.: 600-1,400 mm, Ram stroke: 800 mm, Ram adjustment: 200 mm, Table draw cushion pressure: 5-160 t, Table draw cushion stroke: 350 mm, Ram draw cushion pressure: 5-40 t, Ram cushion stroke: 125 mm, 2x two-hand operation, safety guard system, press control, 2 accessory cabinets with contents. +++ Attention: This machine is part of an online auction! +++ Hnedpfxjx R D R Us Adwsg

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm Hnedpfju Nc Emjx Adwsg make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: new, Year of construction: 2025, CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. Machine description CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. CORMAK H-50/70 semi-automatic band saws, after being switched on, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Manual handling of the machine is simplified to feeding material towards the bumper. Solid uniform cast iron arm along with the refined, stable design ensure that CORMAK H-50/70 is rigid and reliable, providing very precise cutting. Hydraulic band tension provides optimum cutting. In the case of band breakage the machine stops automatically. Precise guiding of the band is ensured by guides with bearings and cemented carbide inserts. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. Technical data Type Semi-automatic Arm raising and lowering Hydraulic, with stepless lowering adjustment Band speed 26/41/66 m/min Vice Hydraulic Cutting band dimensions 41×1.3×6430 mm Total power 8 kW Dimensions 3200×1100×2100 mm Weight 2900 kg Maximum cutting range [mm] Angle 0º ø500 500×700 Hnedpfx Ajizi T Eedwsg Default equipment Control panel at the front of the machine Semi-automatic work Built-in hydraulic unit Arm position memory function Brush for cleaning the band Hydraulic band tension Semi-automatic work Hydraulic band tension Cooling system Bi-metal cutting band EC declaration of conformity User manual

Condition: new, Year of construction: 2026, TS 300 SD P Bench Grinder with dust extraction, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Hnedpfxor Ez Uwj Adwog Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm - Speed (rpm): 1,250 - Three-phase motor 400 V / 2.2 kW: Operating mode S2-30 min (Short-term operation) - Extractor motor 0.55 kW, suction capacity 350 m³/h - Weight (kg): 90 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2000, Make: DROOP + REIN, Model: T2540R50E, Year of manufacture: 2000, Serial No.: 01540, Control: Fidia, Type C20/M30, Travels X/Y/Z: 5,000 x 3,000 x 1,950 mm, 5 axes, Tool holder: SK 50, Table size: 5,000 x 3,500 mm, Spindle speed: 6,000 rpm, 60-position tool changer, Measuring system: Braankamp, Safety light barriers, 1 workbench, 3 drawer cabinets, 3 WTS trolleys, 6 WTS roller cabinets, Contents: 250 SK 50 tool holders, measuring probe, clamping devices, setup tools +++ Note: Machine is part of an online auction! +++ Hnsdpfex R Dr Eex Adwjg

Condition: used, Technical details: voltage: 220 V / Hz revolution per minute: nicht bekannt U/min weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Hedpju Ngx Dofx Adwsng Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible *

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips Hnodpfx Adevu Tp Aowsg An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 2.5 mm/0.02 mm vernier

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min Hnodpjvt Nvpofx Adweg strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: new, Year of construction: 2025, functionality: fully functional, 600x240 mm Cross Table Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Cross table is well-made from high-quality materials Hedpfx Aevu Trwedwong Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Hodovu Uwujpfx Adwjng Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: new, Year of construction: 2025, functionality: fully functional, Cross table with precisely ground cast iron work surface. Equipped with T-slots which allow for workpiece fixture. Intended for processing, milling and drilling while preserving high precision due to a very accurate 0.02 mm vernier. Technical data Vice size 125 mm Hnjdovu Tnxepfx Adwsg Base size 200×270 mm Table size 475×154 mm Transverse feed 150 mm Longitudinal feed 320 mm Vernier 0.02 mm Groove width 16 mm Screw spacing 175 mm Total dimensions 772×440×180 mm Weight 28 kg