Used Double End Miter Saw for sale (40,318)

Year of construction: 1990, condition: excellent (used), Double cut-off saw STRIFFLER Casdjibyknjpfx Addja Cutting length 2,2 m

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Casdpfx Aew Sadreddja

Condition: good (used), Year of construction: 1995, functionality: fully functional, For sale: Emmegi TU/4 double head cutting-off machine, year 1995. A reliable and simple two-head saw for cutting aluminium and PVC profiles. Ideal for window & door manufacturers and general profile fabrication. Specifications Double head mitre saw Blade diameter approx. 350 mm (Ø300–400 mm) Cutting angles 90° and 45° Cjdpfx Aexz R Npsddsaa Cutting length approx. 3–4 m Pneumatic horizontal clamps Motor power ~1.5–2.2 kW per head Spindle speed approx. 3000 rpm Weight approx. 500–600 kg 400 V / 6–8 bar Machine is in working condition and ready for use. Please verify the accuracy of the machine specifications with the seller.

Condition: excellent (used), Feeding table 6 m stepless saw spacing adjustment, variable feed speed, 2x long-body motors, each 3.5 kW. Maximum workpiece width: 700 mm Maximum cutting width: 460 mm Maximum cutting height: 140 mm Minimum workpiece width: 70 mm Casdpfsxz Umxex Addoa

Condition: used, Year of construction: 2001, functionality: fully functional, Two pneumatically lowered heads with 330 mm diameter saws. Left head – stationary, right – movable. Cutting heads of P models are tilted with the help of pneumatic cylinders. Has a “two-hand” control mode and an instant saw stop device. General characteristics 1 Motors 2 pcs. x 1.1 kW, 380 V 2 Number of revolutions 3765 rpm 3 Saw diameter 330 x 30 mm 4 Saw head tilt 90º- 45º 5 Rotation -45º- 90º- 45º 6 Max. cutting length 3335 mm, 7 Min. cutting length (all models) when heads are turned inward 45º 420 mm 8 Min. cutting length when heads cut at an angle of 90º 365 mm 9 Max. dimensions of cut workpieces when cutting 45º (HxW) 90 x 100 mm 10 Max. dimensions of cut workpieces when cutting 90º (HxW) 90 x 145 mm Codpjxytnlofx Addeaa

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work – after full service - Cutting length: 6000 mm - Discs: 420 mm (bottom cutting) Csdpfx Aewy Emcoddsaa - E355 control - Digital angle indicator - Pneumatic angle adjustment 45-90 degrees - Cutting to outside dimensions, without correction - Cooling and lubrication system - Roller feeder - Vertical and horizontal pneumatic clamps - Automatically lowered and raised disc guards

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Caedpfsi Dfidsx Addsa Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Casdpfx Adovvkm Ijdsa Storage location: Nattheim

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Pneumatic tilting of heads External inclination 45°/22.5° Mechanical adjustment of intermediate angles Codpfx Asxu Dk Toddsaa Oleopneumatic blade feed Useful cutting length (mm): 5,000 Minimum standard cut with 2 heads at 90° (mm): 310 Blade diameter (mm): 450 Touch probe

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm Cajdowz Hygjpfx Addea max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: good (used), Code: 0236 Brand: FOM INDUSTRIE Model: BLITZ ALVA 450 - CE Standard Double-head electropneumatic sawing machine for cutting and machining aluminium profiles, plastic, light alloys, pvc - CE Standard Useful cutting length mm 4000 Cajdpfx Aoxv Dfajddja Vidia blade diameter mm 450 F32 Three-phase motors Hp 3 - Revolutions/min 2800 Head inclination: 90 degrees - 45 degrees external - 22,5 degrees external - Intermediate graduation with mechanical stop and reading on graduated vernier scale First head fixed Second head mobile: automatic positioning with manual option - Automatic head positioning speed 12 mt/min Movable head positioning accuracy: +/- 0,1 mm Minimum cutting capacity between the two heads: 300 mm Maximum cutting capacity between the two heads: 4000 mm Hydropneumatic blade feed (adjustable output speed - rapid retraction) Vertical and horizontal pneumatic clamps Spray lubrication of the cut Mobile head roller conveyor 3 mt Operating pressure 7 bar Suction mouth diameter mm 100 Overall dimensions mm 5760 x 1600 x 1950 h Weight kg 1550

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head Cjdpfxor Ikvuo Addeaa

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Cedjk H Ic Uepfx Addeaa Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Cajdpfxexnlgco Addsa

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Double-shaft multirip saw Rema DMJB-200 Year of production: 2004 The machine is in very good condition, little used, complete with a chip extractor mounted from above. DTR documentation included. Technical data: - saw blade diameter: 350 mm - cutting height of wood: 25–200 mm - minimum thickness of finished slats: 8 mm - maximum spacing of outer saws: 280 mm - minimum length of material: 800 mm - main motor power: 2 × 45 kW - spindle speed: 3300 rpm - conveyor width: 300 mm - feed drive motor power: 3 kW - pressure roller drive motor power: 2 × 0.75 kW - extraction nozzle diameter: 2 × 200 mm Caodpfxsxyq Nao Addja - required extraction air volume: 2 × 3400 m³/h - table height: 850 mm - machine weight: 5500 kg

Condition: good (used), Double Miter Saw Rapid DGS – used, fully functional, ready for demonstration For sale is a Rapid Double Miter Saw DGS in well-maintained, working used condition. The machine is immediately ready for operation and can be demonstrated at any time. Features / Specifications: Model: Rapid DGS Precision double miter saw suitable for aluminum, plastic, and, if applicable, light metal profiles Sturdy, robust construction Miter cuts possible (both saw heads adjustable) Clean, technically flawless used condition Casdpfx Ajxzdvieddea Condition: The machine is in full working order. All functions can be tested live during an inspection. Viewing & Collection: An inspection by appointment is possible. Collection by the purchaser – assistance with loading can be provided if required; crane and forklift are available. Price: Negotiable If interested or if you have further questions, please get in touch!

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Cajdpjxvh E Refx Addja Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm Cedpfotqmmdsx Addeaa - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Condition: new, Year of construction: 2025, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Caedpfx Aow Hl Aqsddja Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Year of construction: 2004, condition: excellent (used), Technical specifications: System for welding longitudinal seams on steel beams with T- or H-profile, crane runway girders or bridge sections made of sheet metal Cajdpfxsxz Hu Ie Addsa - Max. boom arm height: 6,600 mm - Total length of the welding system: 6,700 mm - Horizontal reach of the boom arm: 5,000 mm - System runs on rails - Rail gauge: 2,065 mm - Submerged arc welding process (SAW) - SAW welding units - Power source: MESSER LG800N - Number of power sources: 2 units - Output: 400 amperes - Tack welding device The system is assembled and available for inspection under power in production. The seller assumes no liability for typographical or data transmission errors. The machine’s condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: C123969, saw blade diameter: 500 mm, rotational speed (max.): 2,820 rpm, overall weight: 1,490 kg, tilt adjustment saw blade: 22 °, TECHNICAL DETAILS Speed: 2,820 rpm Number of saw blades: 2 Saw blade diameter: 450 & 500 mm Saw angle: 22° - 90° Motor Caodpfxoxwnhuo Addoa Blade motor power: 2.2 kW MACHINE DETAILS Weight: 1,490 kg Motor Blade motor power: 2.2 kW Electrical data Power: 5.3 kW Current: 13 A Voltage: 400/3 V Frequency: 50 Hz EQUIPMENT Chip conveyor Note: The machine is available from 01.12.

Condition: good (used), Double Mitre Saw Elumatec DG 740/02 – used, operational, ready for demonstration Caedpfx Ajxzduleddoa For sale is an Elumatec double mitre saw DG 740/02 in good, fully functional condition. The machine is immediately ready for use and can be demonstrated on site. Technical Data / Features: Model: Elumatec DG 740/02 Double mitre saw for precise cutting of aluminium and plastic profiles Robust construction, precise cut guidance Both saw units are pivotable / can perform mitre cuts Cleaned and well-maintained used condition Condition: The machine is in working order and in age-appropriate good condition. All functions can be tested live during viewing. The machine has been removed from production, cleaned, and is ready for demonstration in a warehouse until sold. Viewing & Collection: A non-binding inspection is possible by appointment. Collection by the buyer. Price: Negotiable If you are interested or have any questions, please feel free to contact us!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge. Casdpfjwn D Izjx Addoa

Condition: used, Year of construction: 1990, functionality: fully functional, cutting height (max.): 170 mm, rotational speed (min.): 2,800 rpm, power: 2 kW (2.72 HP), pivoting range: 45 °, Equipment: double-sided, Graule ZS170N Used condition, including base, 2x2m roller conveyors, and stops. Without saw blade. Hydraulic return brake should be serviced. Cedpsxy Nrtofx Addoaa VAT can be shown separately.

Condition: ready for operation (used), 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Caodpfxsu Tc Tvj Addsa Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Year: 2003