Used Double End Miter Saw for sale (19,808)

Condition: new, Equipment: CE marking, saw blade guard, Mitre saw with a saw blade diameter from 400mm to 800mm - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are infinitely adjustable) - Two-hand safety control Version as an automatic saw available on request. Optional available: - Automatic mitre adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Version as automatic saw Podsyxlqropfx Akfjgk - Preloading magazine - Horizontal clamping device - Extraction system - Additional accessories on request We are happy to prepare a quotation tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: used, functionality: fully functional, Equipment: documentation/manual, Torwegge Double-End Tenoner, Year of Manufacture The machine offered is being sold as a used unit. The sale is made with exclusion of any liability for material defects. The machine is sold as inspected, with any and all warranties excluded. The seller does not provide any guarantee regarding functionality, performance, or suitability for any particular purpose. Podpfxeywfirj Akfegk Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the machine is the responsibility of the buyer, at their own cost and risk. The buyer assumes all costs and risks associated with removal, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest upon commencement of dismantling or loading. Other Information No liability is accepted for hidden defects. All information regarding the machine (e.g. year of manufacture, operating hours, technical specifications) is provided to the best of our knowledge, but without guarantee.

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Pgedpfx Aodzp Snjkfok Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Year of construction: 2016, condition: used, We offer this used double mitre saw FomIndustrie BLITZ ALVA 550 A, year of manufacture 2016. Type: BLITZ ALVA 550 A Code: XZ 10727 Pedpfx Asyt Ev Aokfjgk Serial number: C0800165 Tool speed: 2800 rpm Max tool diameter: 550 mm Bore diameter: 32 mm Electrical supply: 3F400VCA50HZ Power consumption: 5.4 kW Year of manufacture: 2016 Maximum weight: 1900 kg If you have any questions or need more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade bore: 40 mm, Equipment: documentation/manual, scrap and mitre circular saws Model: ZS 170N Motor: 400 V / 2.0 kW Speed: 3500 rpm Cutting length: 410 mm (at 90°) Pgjdpfeypwhpjx Akfjk Cutting height: 170 mm (at 90°) Mitre range horizontal: 45°-90°-25° Mitre range vertical: 90°-45° (left) Saw blade diameter: 420 mm Extraction nozzle: 100 mm Weight: 120 kg

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw Pedpsg Db U Aefx Akfogk - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Pjdpfx Akeq Ii Dlofegk Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Psdpfx Akeydc Tmjfsgk Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable to an angle of 45/-45° Motor power: 2×2.2 kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Pgedpexwumqofx Akfok Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Saw blade bore: 30 mm Saw blade diameter: 220 mm Spindle speed: 5000 rpm

Condition: excellent (used), Year of construction: 1980, 1 x AUTOMATIC DOUBLE END TENONER SPANEVELLO Model STDL with 3 + 3 spindles TECHNICAL DATA: - Working width: 170 – 3000 mm - Workpiece thickness: 5 – 120 mm - Top pressure beams with drive belts and clutch - Bottom feed chains, 70 mm width - Automatic lubrication of bedplates - Automatic lubrication of feed chains - Dogs distance: 340 mm - Variable feed speed: 1.5 – 20 m/min - Power supply: 380V / 3ph / 50 Hz MACHINE EQUIPPED WITH: Pedpfxoyurqpo Akfsgk - Left-hand adjustable infeed side fence – manual horizontal adjustment Jump Cutting/Scoring Units 1-2: - Motors: 1.5 HP – 3000 RPM - Shaft diameter: 35 mm x 55 mm length – Max. tool diameter: 200 mm Hogging/Milling Units 3-4: - Motors: 5 HP – 3000 RPM - Shaft diameter: 40 mm x 55 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 140 mm - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout Milling Units 5-6: - Motors: 5 HP – 3000 RPM - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout - Shaft diameter: 40 mm x 95 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 120 mm Machine in good working condition. Tested in our workshop prior to delivery.

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 400 Volt three-phase, 2 kW Pgjdjyv Aa Sjpfx Akfjk Saw blade diameter: 350 mm, bore: 30 mm Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm

Condition: used, Year of construction: 2007, functionality: fully functional, Used machine Year of manufacture: 2007 Product information: Max. cutting length: 6,000 mm Max. saw blade diameter: 380 mm The saw heads can be continuously swiveled from 0° to 45° to the left and right, allowing for both external and internal dimension cuts. Indexing points at 15°, 30°, and 45° Hydropneumatic saw feed for precise cutting, infinitely adjustable with rapid traverse Pjdpfjyu Hupox Akfegk Vertical and horizontal pneumatic material clamping devices ensure optimal profile fixation E 111 Electronics: Manual cutting length adjustment with digital display E 111 Switching between absolute measurement and chain measurement Retention of the displayed actual value in the event of power failure Technical Data: Minimum cutting length: 520 mm Electrical connection: 400 V, 3~, 50 Hz Power output per motor: 3 kW Compressed air connection: 7 bar The following accessories are also included: 1x Fixed workpiece support

Condition: good (used), Year of construction: 1995, machine/vehicle number: 40105, Offer 26053 Technical Data: - Saw blade diameter: 550 mm - Max. cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 350 mm - Cutting area, e.g. 90°: 110 x 390 mm - or as per diagram Pgsdpfx Aksyiz Hcsfek - Swivel range inward, pneumatically: 90° - 45° - Tilt range inward, pneumatically: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 W - Space required approx.: W 7660 x H 1600 x D 1400 mm - Weight approx.: 2100 kg - With: adjustable cutting length and angle, - separate control cabinet, automatic spray unit, - integrated roller conveyor,

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Crosscut and Mitre Circular Saws Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Cutting length: 430 mm (at 90°) Cutting height: 135 mm Pedpfx Aksymqklofsgk Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Extraction port: 100 mm Weight: 100 kg

Condition: used, Technical details: Pgodpfxju Nigwe Akfsk saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: new, Technical Data: Cutting range: Round 0°: 255 mm Square 0°: 200 x 200 mm Flat 0°: 320 x 200 mm Round 45°: 195 mm Square 45°: 195 x 195 mm Flat 45°: 195 mm Round 60°: 125 mm Square 60°: 125 x 125 mm Flat 60°: 130 x 120 mm Round -45°: 200 mm Square -45°: 170 x 170 mm Flat -45°: 200 x 170 mm Cutting speeds: 35 / 70 m/min Saw blade: 2750 x 27 x 0.9 mm Working height approx.: 930 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 400 V Dimensions LxWxH approx.: 2000 x 1250 x 1900 mm Weight approx.: 350 kg Features: - Double mitre saw with a pivoting saw bow from left -45° to right +60° - Ideal for cutting pipes, profiles, as well as solid VA, steel, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration operation - Two saw band speeds for optimum adaptation to the workpiece - Hydraulic downfeed cylinder - Quick-release vice for simple and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC, German documentation and German service Scope of delivery: - Saw blade - Material stop Psded R Sipepfx Akfogk - Pressure gauge (band tension) - Carbide saw blade guides - Vice with quick-release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic shut-off - Stand/base

Condition: used, cutting length ca. 2.200 mm Psdpew D Dfxofx Akfjgk mitre angle 45° - 90° workpiece max. 50 x 70 mm

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Podpexvh E Refx Akfjgk Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, working width: 2,000 mm, total length: 6,000 mm, overall weight: 3,000 kg, cutting height (max.): 35 mm, TECHNICAL DETAILS Psdeyttdhjpfx Akfsgk Working width min.: 520 mm Working width max.: 2,200 mm Cutting height (max.): 35 mm Maximum passage height at existing milling cutters: 35 mm Feed speed: not adjustable (fixed setting, value not specified; estimated at approx. 8–10 m/min) MACHINE DETAILS Type of input power: Alternating current (AC) Dimensions & Weight Dimensions (L x W x H): 6,000 x 4,000 x 3,000 mm Weight: 3,000 kg EQUIPMENT Soundproof cabin Five processing axes per side, mechanically adjustable

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550 Psdpfxouiwqhe Akfegk

Condition: used, Year of construction: 1985, functionality: fully functional, working width: 2,000 mm, total width: 4,000 mm, total length: 6,000 mm, total height: 3,000 mm, overall weight: 3,000 kg, cutting height (max.): 35 mm, type of input current: AC, space requirement height: 3,000 mm, IMA double-end profiler with five machining axes per side. All axes are mechanically adjustable. Infinitely variable feed rate. Sale includes soundproof cabin. Ex location, self-dismantling. Pgedpfx Aeyf Ek Rskfek

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Psdpoyk Empofx Akfegk Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). Pgedpfxorahzgj Akfjk • Oil spraying system. • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.

Year of construction: 1983, condition: good (used), RÜCO double crosscut saw Type 22 Pjdpfjin E Rqsx Akfjgk Year of manufacture 1983 S/N 10860 Working range : cutting size 2600 x 2200mm smallest cutting width 210mm cutting height 100mm with saw blade Ø 450 = 125mm Technical data: Saw blades each 45° tiltable 2 X main motor 4,0 KW, saw blade Ø 400 mm 2 X scorer 0,56 KW, saw blade Ø 140 mm Weight 1400 Kg space requirement approx. 4400 x 4000 H 1000 mm Transport dimensions approx. 4400 x 1300 H 1300 mm technical data under reserve

Condition: excellent (used), Year of construction: 2000, Double end tenoner Celaschi Pgjdpfx Aksvx Afnofok 4+4 motors Opening side up to 3000 mm