Used Double Miter Saw for sale (17,198)

Condition: excellent (used), functionality: fully functional, saw blade diameter: 420 mm, Motor 400 V / 2.0 kW Speed 3500 rpm Iedpfoxdtlfox Adwoht Cutting length 410 mm (at 90°) Cutting height 170 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 90°-45° (left) Saw blade O 420 mm Suction nozzle 100 mm Weight 120 kg

Condition: excellent (used), functionality: fully functional, OMS double mitre saw for wood and aluminium Iedpfxew Htxto Adwsht Specification: • Condition – used, after inspection • Manufacturer – OMS • Main motors – 2 x 2.5 HP • Pneumatic head control • Max cutting length – 351 cm • Min cutting length – 34 cm • Max cutting cross-section – 110x150 mm (at right angle) • Max blade diameter – 300 mm • Extraction ports, diameter 60 mm • Mitre cutting from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 800 kg • Overall dimensions – 412 x 85 x 130 cm (L x W x H) Additional information: • Very good original technical condition • The attached photos show the actual condition of the machine • Possibility to connect and inspect the device on site

Condition: used, Year of construction: 1980, Maximum cutting width: 4500 mm Connected load: 9.37 kW Iedpfxew E D E Us Adweht

Year of construction: 2012, condition: ready for operation (used), A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible. Ihsdjxq Ew Topfx Adwst

Year of construction: 2000, condition: good (used), Power: 5.5 kW Weight: 2,200 kg Ihsdpow S Nycefx Adwet

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm Ihjdpfxodbp Eqs Adwot cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm Ihsdocu Dvujpfx Adwet cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Ihsdpfetuvg Dox Adwst

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm space needed: 6400 x 1400 x 1700 mm Isdpfoz E Snox Adwjht weight: ca. 1600 kg

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Ihsdpfx Adsw I Dpqowot

Condition: excellent (used), Miter circular saw make KALTENBACH type TL 250 for aluminum and plastic profiles Ihjdpfx Aomrq Evedwot Saw blade diameter 250 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offer – Double Mitre Saw Emmegi Norma 400 We are pleased to offer you the Emmegi Norma 400 double mitre saw – a precise and reliable machine for professional cutting of aluminium and PVC profiles. Technical Data: - Saw blade diameter: Ø 400 mm - Cutting length: up to approx. 4,000 mm, minimum length approx. 485 mm - Saw head swivel range: ± 45° (inwards/outwards) - Drive: Hydropneumatic feed, motor power 2.2 kW per head, braking time approx. 10 s - Workpiece clamping: Pneumatic, horizontal and vertical, with 'low pressure' safety feature - Cooling: Oil-water micro-mist system Iedpfxew R T Tqe Adwjht

Condition: excellent (used), saw blade diameter 350 mm Ihedpfx Adjiqy Abowjt

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 380 mm, overall weight: 560 kg, Minimum cutting length at 90°: 520 mm Minimum cutting length at 45° (swiveled): 520 mm Locking positions at 15°, 30°, and 45° Ihjdpfx Adew Ng Rgewet Swivel range continuously adjustable from 0° to 45° Hydropneumatic saw feed Saw blade diameter: 380 mm Saw blade speed: 2,800 rpm Voltage: 230/400 V, 3~, 50 Hz Output per motor: 3 kW Compressed air connection: 7 bar Version: 3 m

Year of construction: 2025, condition: new, Double head sawing machine FOM INDUSTRIE BLITZ ALVA 500 A 6m with Ø 500mm blades. Maximum cut between the two heads: 5m In stock Equipment: - Two Ø 500mm tungsten carbide saw blades - Head tilting: 90°- 45°- 22.5° and intermediate angles achieved using stops - Cutting area guard kit - Two pneumatic vertical vices - Three pneumatic horizontal vices - Movable head roller table (2,5m) - Two retractable pneumatic intermediate profile support - Profile height measuring device - Spray mist blade lubrication system - Set up for the extraction of chips and fumes Ijdpfxsgkpv Dj Adwjht - Control RIGHEL - Hydro-pneumatic feeding of saw blades - First and second head angle readout kit - Software for highlighting profile sections in DXF format - Software for step-by-step cutting with two-handed command - Software for special length cuts (over and under size and super undersize) and 45° trim cut - Label printer - USB port - Ethernet for network connection - Aspiration system

Condition: used, - 2250 mm Cutting width - 80 mm cutting height Isdpfx Adjhkm A Nswjht - 2x 3,7 KW saw motors

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2950x1620x1770 mm Weight 3300 kg Isdpfx Adsvz Hxkeweht Total power requirement 71,5 kw

Condition: good (used), Year of construction: 2000, I sell the double mitre saw OMGA TR2A. Cutting length 390 - 3000mm Cutting width max. 170mm Cutting height max. 90mm Ihedpfx Adotwbcyjwst Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use. Ihjdpfxevwgnws Adwot

Year of construction: 2022, condition: new, angle: 0° - 90° Iedpfx Adji Ezr Njweht max cutting length: 1370 mm

Condition: used, Double drilling mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Ijdpfsv Tnihox Adwsht

Condition: good (used), Year of construction: 1992, functionality: fully functional, cutting height (max.): 130 mm, cutting length (max.): 400 mm, overall weight: 1,400 kg, Monitored saw blade cover; cuts at 90° profile height 130 mm and profile width 400 mm, at 45° = 130 x 280 mm at 30° = 130 x 195 mm. Acute angle cutting at 30° right and left. - hydraulic material clamping vertically and horizontally Ihsdoxnzf Ujpfx Adwot - hydraulic stepless saw feed - clamping pressure adjustment - original Trennjaeger stops are available. .

Condition: excellent (used), functionality: fully functional, maximum spacing of aggregates 3.3m two motors 2,2kW each inclination of discs Iodpovby T Usfx Adwjht adjustment of the cutting angle within -45/+45 degrees maximum diameter of discs 330mm pneumatic clamps disc rotation speed 3765 rpm CE marking

Condition: excellent (used), functionality: fully functional, Engine power 2.2 KW Manual aggregate movement Disc diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Ihjdpfxewbpwhs Adwet Vertical pneumatic clamps Starting the cutting process with a pedal Safety switch Width 900 mm, height 1500 mm

Condition: like new (used), Maximum unit spacing: 340 cm Two motors, each 1.1 kW Cutting angle adjustment: -45 to +45 degrees Saw blade diameter: 300 mm Pneumatic clamps Ijdpfevtpqgjx Adwjht Option to cut with a single blade Control panel Year of manufacture: 2001