Used Double Plate Saw for sale (29,085)

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm Djdpfx Adevwgnwodjcr The double tiller saw is in very good condition and has only been used very little use.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0799336047, Elumatec double mitre saw Djdpoxf Dugjfx Addscr

Condition: not inspected (used), Double mitre saw Manufacturer: Pertici, Model: Univer 502D2, Year of manufacture: unknown, Saw blade diameter 500 mm, pneumatic clamping, extraction connection, digital display, cutting length 360 mm to 6,000 mm, cutting width 150 mm, saw blades tiltable 90/45 degrees, automatic feed, material feed 4,000 mm Dsdpfsxfi U Sex Addecr

Condition: excellent (used), functionality: fully functional, OMS double mitre saw for wood and aluminium Specification: • Condition – used, after inspection • Manufacturer – OMS • Main motors – 2 x 2.5 HP • Pneumatic head control • Max cutting length – 351 cm • Min cutting length – 34 cm • Max cutting cross-section – 110x150 mm (at right angle) • Max blade diameter – 300 mm Dcedpfow Htxtex Addjr • Extraction ports, diameter 60 mm • Mitre cutting from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 800 kg • Overall dimensions – 412 x 85 x 130 cm (L x W x H) Additional information: • Very good original technical condition • The attached photos show the actual condition of the machine • Possibility to connect and inspect the device on site

Condition: used, functionality: fully functional, Useful cutting length 4000 mm blade diameter 4500 Dcjdpewwm E Iefx Addsr pneumatic head tilting digital display for mobile head measurement

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Dcodpfod Akygsx Addsr Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: excellent (used), Year of construction: 2008, Maximum cutting lenght : 3000 mm Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Djdpfexc Tyysx Addjcr Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying WINDOWS 2000 Software

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 380 mm, overall weight: 560 kg, Minimum cutting length at 90°: 520 mm Minimum cutting length at 45° (swiveled): 520 mm Dsdpsw Ng Rgofx Addocr Locking positions at 15°, 30°, and 45° Swivel range continuously adjustable from 0° to 45° Hydropneumatic saw feed Saw blade diameter: 380 mm Saw blade speed: 2,800 rpm Voltage: 230/400 V, 3~, 50 Hz Output per motor: 3 kW Compressed air connection: 7 bar Version: 3 m

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Dsdew I Dpqjpfx Addocr

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° Dsdpfx Adow D Dfxsdecr workpiece: max. 50x70 mm Further data: See PDF

Year of construction: 2019, condition: excellent (used), Double-head automatic saw for cutting aluminium and PVC profiles, equipped with electronic control and pneumatic tilting of the heads. Features a virtual tilting axis for the cutting heads. Cutting length: 5000 mm Dcsdjwwtwqspfx Adder Control: Electronic with automatic feed of the movable head Tilting of heads: pneumatic, with adjustable angles (range 90° to 45°). Manual adjustment of heads: other angles up to 20°30'. Additional features: Hydropneumatic blade feed, profile clamping.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, saw drive: 31,000 W, total length: 17,000 mm, total height: 1,000 mm, height adjustment type: mechanical, total width: 2,500 mm, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers Dedpfx Aowa T Dcsddocr 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Please contact us if you are interested or have any questions.

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Dsdpfotuvg Dex Addocr

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch Djdpfx Adsvyidmsdjcr • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: new, Year of construction: 2025, CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. Machine description CORMAK H-50/70 is a highly efficient column band saw for semi-automatic cutting of steel profiles, cast iron and non-ferrous metals. Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase. CORMAK H-50/70 semi-automatic band saws, after being switched on, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Manual handling of the machine is simplified to feeding material towards the bumper. Solid uniform cast iron arm along with the refined, stable design ensure that CORMAK H-50/70 is rigid and reliable, providing very precise cutting. Hydraulic band tension provides optimum cutting. In the case of band breakage the machine stops automatically. Precise guiding of the band is ensured by guides with bearings and cemented carbide inserts. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. Technical data Type Semi-automatic Arm raising and lowering Hydraulic, with stepless lowering adjustment Band speed 26/41/66 m/min Vice Hydraulic Cutting band dimensions 41×1.3×6430 mm Total power 8 kW Dimensions 3200×1100×2100 mm Weight 2900 kg Maximum cutting range [mm] Angle 0º ø500 500×700 Default equipment Control panel at the front of the machine Semi-automatic work Built-in hydraulic unit Dsdpfx Adjizi T Ejdecr Arm position memory function Brush for cleaning the band Hydraulic band tension Semi-automatic work Hydraulic band tension Cooling system Bi-metal cutting band EC declaration of conformity User manual

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Dcedpfx Aswprmzedder Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 2396, overall weight: 140 kg, rotational speed (min.): 2,800 rpm, Total width: 240 mm Total height: 120 mm Spindle speed (min): 4,000 rpm Spindle speed (max): 7,000 rpm Total weight: 300 kg Rotation speed (max): Dcjdpfx Adowhpnaeder 7,000 rpm Rotation speed (min): 4,000 rpm Input voltage: 400 V Equipment: Rotation speed infinitely variable Soundproof automatic overhead milling machine. Adjustable feed and rotation speed. Milling at an angle from -45° to 45° by adjusting the fence. Easy and quick blade change thanks to the pneumatic quick coupler. Pjbtxbovf Nw Roq H Iepr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3550x1450x1800 mm Weight 3500 kg Dsdovz Hxqepfx Addocr Total power requirement 94,75 kw

Condition: good (used), Year of construction: 2000, I sell the double mitre saw OMGA TR2A. Cutting length 390 - 3000mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures Dcodpfjtwbcysx Addsr 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 1,230 kg, AUTOMATIC SAW / DOUBLE HEAD STB / FIMTEC SD 500 S6 YEAR 2005 Dsdpfx Adjr E Alqodjcr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2950x1620x1770 mm Weight 3300 kg Dsdpfxsvz Hxkj Addocr Total power requirement 71,5 kw

Condition: excellent (used), Year of construction: 2015, AUTOMATIC TWO-HEAD SAW ELUMATEC DG 244 + E580 -5 YEAR 2015 Dcsdpfewltqaox Addsr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Weight 850 kg Dcjdpevz E D Esfx Addor Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4150x1200x1650 mm Weight 450 kg Dodpfx Adsvz Ezwedecr Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Dsdpfxsvz Eihe Addjcr Weight 665 kg Total power requirement 3 kw