Used Double Rack Press for sale (40,870)

Condition: used, Year of construction: 1989, pressure 100 t distance between columns 1060 mm Bodpjvuk Naefx Addodk stroke 700 mm distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm table height over floor 950 mm side window 580 x 750 mm ram surface 1000 x 700 mm oil volume 700 l power requirement 47,0 kW weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA) can be offered without putting into operation or alternatively with new control Siemens S7-1500F

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm Bdjdekk Exjpfx Addok nail length: 15 - 80 (100) mm output: 300 St./min.

Condition: good (used), Pressing force 200 to table: 1500x1000 mm motor: 45 kW weight: 18000 kg Stand width:1500mm Bdsdegvz Hxepfx Addok dimensions: Machine: 5500x2610x2150 mm

Condition: good (used), Manufacturer: EXNER Type/Model: EXSB 150 Serial No.: 10473 Year of manufacture: 03/2002 Press force: 1,500 kN Power: 41.81 kW Tool dimensions: 1,400x1,200 mm Bsdpsxwmdhsfx Addedk

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Bsdewva I Hjpfx Addsdk Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Technical specifications Tonnage: 300 T Clear span between uprights: 2,100 mm Stroke of cylinder: 600 mm Maximum distance between heating plates: 800 mm Heating plate dimensions: 1,800 x 1,100 mm Table height from floor, incl. damping plates and heating plate: 800 mm Overall height approx.: 3,600 mm Width approx.: 3,800 mm Depth approx.: 1,870 mm Weight approx.: 22,000 kg Hydraulic power unit by BOSCHREXROTH Hydraulic pump by BOSCHREXROTH: 105 L/min 22 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Return speed: 150 mm/sec Alternative: Hydraulic power unit by DUPLOMATIC Hydraulic pump DAIKIN HYBRID-SERVO: 130 L/min 15 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Return speed: 150 mm/sec Two-hand control Ram return by pressing the blue button Bdsdox Ap Itjpfx Addjk Stroke limitation via Leuze measuring rod and monitor Fixed lower table with T-slots (X-direction): 2,100 x 1,100 mm Ram with T-slots (X-direction), size: 1,900 x 1,100 mm CE certificate and user manual: Included in delivery

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm Bodpfx Ajvuuf Ssddsdk stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Bdjdpfex Ug Dox Addjk Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm Bdjdpfjxuv Htox Addok ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Bjdpfxexr Ay Uo Addodk

Condition: excellent (used), functionality: fully functional, CATALOG NUMBER 7559 TECHNICAL DATA - Loading fields: 2 - Manually adjustable side clamps: 2x4 pcs - Pneumatic vertical clamps: 2x4 pcs - Max length of glued elements: 3300 mm - Max height of glued elements: 1020 mm - Max thickness of glued elements: 100 mm - Dimensions L/W/H: 4270x1600x2000 mm - Weight approx.: 800 kg ADVANTAGES – Two working fields – Gluing length 3300 mm – Pneumatic cylinders – Used press, in very good condition Net price: 10,900 PLN Bdjdpfxov Dirxs Addek Net price: 2,600 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 1974, Pressure total: 500 ton Ram stroke: 500 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 980 mm Free frontal opening L-R: 2900 mm Table surface area : 2800 x 1800 mm Slide area: 2800 x 1800 mm Die cushion capacity in table: 100 ton Die cushion stroke: 180 mm Die cushion pad area: mm Table height over floor: 615 mm Bdodpfxjxq Tn He Addok Number of strokes: 15 / 30 s.p.m. Required power: 90 kW Weight of machine approx.: 160 ton Standard configuration Extended machine accessories

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm material width 120 mm Bedpfjvuk Hrex Addodk material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m Bdedpfsvt Nvpex Addok dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: used, Year of construction: 1974, Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 350 mm Table surface area : 3645 x 2140 mm Slide area: 3645 x 2140 mm Die cushion capacity in table: 120 ton Die cushion stroke: 305 mm Die cushion pad area: 2805 x 1260 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Table height over floor: 650 mm Number of strokes: 16 s.p.m. Bjdpfxjxq Tnto Addedk Required power: 90 kW Weight of machine approx.: 185 ton Standard configuration Extended machine accessories

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm Bsdpfjvuubajx Addjdk table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm Bedou Nflijpfx Addodk *

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm Bjdpfx Adsvut Tnededk side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm Bdodpfsu Icxqjx Addjk total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Bedpfjvut Rysx Addodk Height above floor 4,26 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m Bodpfx Adovuuiksdsdk year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Bodpfx Ajvuuh Teddodk Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm Bedpfx Asvuuhgsddsdk stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm Bodpfxexwdrve Addsdk table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m permitted for manual loading according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, hydraulic cutting impact cushioning with motoric adjustable depth stop, ram interlocking, two-hand operation as is where is, WITHOUT putting into operation in our warehouse

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Bjdpjvuubgjfx Addjdk Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available