Used Double Side Tenonner for sale (11,722)

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm Djdpfxjvut Tne Addecr side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2001, functionality: fully functional, Two pneumatically lowered heads with 330 mm diameter saws. Left head – stationary, right – movable. Cutting heads of P models are tilted with the help of pneumatic cylinders. Has a “two-hand” control mode and an instant saw stop device. Dsdpfx Asxytnlsddscr General characteristics 1 Motors 2 pcs. x 1.1 kW, 380 V 2 Number of revolutions 3765 rpm 3 Saw diameter 330 x 30 mm 4 Saw head tilt 90º- 45º 5 Rotation -45º- 90º- 45º 6 Max. cutting length 3335 mm, 7 Min. cutting length (all models) when heads are turned inward 45º 420 mm 8 Min. cutting length when heads cut at an angle of 90º 365 mm 9 Max. dimensions of cut workpieces when cutting 45º (HxW) 90 x 100 mm 10 Max. dimensions of cut workpieces when cutting 90º (HxW) 90 x 145 mm

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total length: 2,700 mm, total width: 1,200 mm, working width: 530 mm, Industrial machine lamination for offset and digital, simultaneous front & back laminating. The machine is equipment with Heidelberg vacuum feed. New equipment ! Equipment has not been used for work but only for initial testing/installation. Laminating machine to be perfectly adapted for both offset printing and digital printing with dry toner. Maximum speed: 25 m/min (working speed is variable depending on several factors: paper/cardboard substrate, the type and quality of the laminating foil and the type of printing (offset, ink, laser or digital). It can laminate one side or both sides in one pass, working speed up to 25 m/min can be achieved even in double-sided mode. - Maximum average size 53 X 100 cm; - minimum dimensions width 30 cm X length 20 cm; - average thickness between 115 gsm and 600 gsm; Full option equipment: - automatically overlaps and separates plasticised sheets, - allows adjustment of pneumatic pressure between the rolls and can work in heavy duty mode in case of large runs such as packaging. - can laminate even plastic window packaging with non-adhesive rollers (2 non-adhesive rollers); - the way to apply metal foil and achieve selective lacquer effect; - adjustable hydraulic pressure; - Hilderberg vacuum feed from 54 cm high stack and automatic lift and 6 bar 130 l/min external compressor; - jogger for receiving laminated sheets, with 10 cm stack; - equipped with 2 pneumatic axles for fixing the laminating roll; - equipped with 2 pairs of press rollers for front/back lamination; - accepts 3000 m rolls, foil between 24 and 31 microns; - BOPP film accepted between 23 and 42 microns, Nylon maximum 35 microns, PET maximum 35 microns (regardless of film producer); - longitudinal slitting knife; - longitudinal perforating knife; Floor area 120 x 270 cm Power supply: 3-phase, 400V AC, 50-60 Hz Power consumption: 7,500 W The machine is equipped with the following options: 2 non-stick cylinders 2 pneumatic axles for fixing the rolling roll 2 pairs of press rolls for double-sided lamination FOILER - unit for foiling and laminating with UV selective varnishing effect Jogger for receiving laminated sheets Large format module (max.53x100cm) Negociable price EXW - old price 49.000 - new price 30.000 euro + VAT (without VAT in EU). Dodpfemcw T Tox Addecr

Condition: like new (used), Year of construction: 2003, functionality: fully functional, total length: 52,000 mm, total width: 24,000 mm, total height: 10,500 mm, input voltage: 400 V, working height: 1,050 mm, overall weight: 2,000 kg, compressed air connection: 6 bar, drill diameter: 180 mm, air pressure: 6 bar, input frequency: 50 Hz, type of input current: AC, power: 2.5 kW (3.40 HP), 8 Sep | Drilling machines METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Technical data: glass thickness 2-50 mm bore diameter 3-180 mm weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm Djdpfxorg E Hce Addjcr maximum measurement machine frame to drilling center:

Condition: used, mileage: 4,84,090 km, power: 368 kW (500.34 HP), first registration: 05/2017, fuel type: diesel, number of seats: 76, gearing type: automatic, emission class: euro6, color: silver, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++Voltage Converter+++ +++Vis-a-Vis Groups+++ +++2 Refrigerators+++ +++Lease-Purchase Option!!!+++ General Information: Engine: MAN AdBlue * Emission Standard: EURO6 * Total Seats: 76 * Seating arrangement: 74+1+1 sleeper seats * Transmission: Automatic Safety Features: * Retarder * Cruise Control * Adaptive Cruise Control * ABS * ASR (Anti-Slip Regulation) * ESP (Electronic Stability Program) * EBS (Electronic Braking System) * Fog Lights * Xenon Headlights * Brake Assist * Lane Departure Warning System * Reversing Camera * Multifunction Steering Wheel Passenger Compartment: * Auxiliary Heater * Wood Floor Look * Air Conditioning * Tables * Curtains * Luggage Racks * Luggage Nets * Adjustable Air Nozzles * Reading Lights * Double Glazing * Footrests * Kitchen * Refrigerator * Microwave * Coffee Machine * Center Toilet * Headrests with Leather Inserts * Tour Guide Microphone * Driver Microphone Audio, Communication, Electronics: * Navigation System * Radio * CD Player * Video System * DVD Player * Wi-Fi * Power Outlets * Voltage Converter Exterior: * Trailer Hitch * Lifting/Lowering System * Power Steering * Tachograph Card * Sun Visor * Sleeping Compartment * Electrically Adjustable Exterior Mirrors * Ski box fastenings * Central Locking System * Roof Hatches * Roof Fans * Roof Ventilator Miscellaneous: * German registration certificate * Twin Tyres * Vehicle length: 14.00 m * Vehicle width: 2.55 m * Vehicle height: 4.00 m * Alloy wheels * Front axle tyres approx. 70% * Middle axle tyres approx. 95% * Rear axle tyres approx. 95% Our internal vehicle number: 11595 Dcjdpowqyxhjfx Adder Subject to prior sale. Text and images may vary. Always more than 300 vehicles available in stock.

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure Djdpewqcfdjfx Addscr - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm Dsdpevut Ryefx Addecr ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 2010, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,520 mm, • Monoblock structure in welded steel with a mobile gantry in steel. • Processing speed up to 18 m/min. • Worktable: fixed table made of high-thickness aluminum profiles. • Hardened linear guides and preloaded ball-bearing carriages. • Transmission via precision ball screws on all 3 axes. • CN7000 numerical control with touch screen and brushless servo drives. Dodpfxjxxii Aj Addjcr • Available in 5 sizes for maximum flexibility. • Z 350 option for 3D applications. • Quality and performance suitable for good productivity. • Well-known ease of use. • Compliant with European safety regulations. • Numerous options: brushless servomotors, micro-lubrication, automatic tool changer, vacuum table (with turbine or vacuum pump), high-frequency spindles, contact engraving spindles, fourth axis.

Condition: good (used), axle configuration: 2 axles, first registration: 04/1979, total width: 2,500 mm, suspension: steel, wheelbase: 5,180 mm, color: red, Year of construction: 1979, Axle configuration Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Double wheels; Max. axle load: 8000 kg Rear axle 2: Double wheels; Max. axle load: 8000 kg Weights Empty weight: 3.400 kg Carrying capacity: 22.600 kg GVW: 26.000 kg Dedpfx Aoxyy S Rsddocr Condition Technical condition: good Visual appearance: good Identification Registration number: OZ-45-78 Additional information Please contact Arie or Pedro for more information

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work – after full service - Cutting length: 6000 mm Dcodswy Emcspfx Addsr - Discs: 420 mm (bottom cutting) - E355 control - Digital angle indicator - Pneumatic angle adjustment 45-90 degrees - Cutting to outside dimensions, without correction - Cooling and lubrication system - Roller feeder - Vertical and horizontal pneumatic clamps - Automatically lowered and raised disc guards

Condition: used, mileage: 9,10,762 km, power: 228 kW (309.99 HP), first registration: 07/2007, fuel type: diesel, number of seats: 1, gearing type: automatic, emission class: euro4, color: yellow, Equipment: ABS, air conditioning, parking heater, +++Adventure Bus+++ Dedoxxfubopfx Addscr +++Game Bus+++ +++Children's Party Bus+++ +++Mobile Fun+++ General Engine: MAN AdBlue Particle Filter Emissions Standard: EURO4 Total Seats: 1 Transmission: Automatic Safety * Intarder * ABS, ASR * Fog Lights Passenger Compartment * Auxiliary Heating * Air Conditioning * Driver Microphone Exterior * Double-Width Doors (Number): 3 * Lifting/Lowering System * Power Steering * Tachograph Window * Sun Visor * Electric Exterior Mirrors * Roof Hatches Other * German Vehicle Registration Document * Twin Tires * Vehicle Length: 13.07 m * Vehicle Width: 2.55 m * Vehicle Height: 4.06 m * Tires: Front axle approx. 50% * Tires: Rear axle approx. 50% * Tires: Rear approx. 50% Our internal vehicle number: 11405 Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles are always available.

Condition: used, empty load weight: 8,683 kg, axle configuration: 3 axles, first registration: 03/2017, loading space length: 13,410 mm, loading space width: 2,700 mm, loading space height: 2,490 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, Year of construction: 2017, Equipment: ABS, Tare weight: 8683kg, Pharma certificate, Loading area (L W H): 13,410 mm x 2,700 mm x 2,490 mmTyre size: 385/65 R22.5, Loading area volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle, Pallet box (double), Electronic Brake System EBS, Doubledeck with crossbars, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Dodpfsxw Dygsx Addecr

Condition: used, Year of construction: 2008, pressure 200 t distance between columns 1050 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 450 mm table surface area 1000 x 1200 mm table height over floor 850 mm side window 500 mm ram surface 1050 x 870 mm speed down 300 mm/s speed up 300 mm/s Dcsdpovut Nisfx Addjr working speed 18 - 36 mm/s power requirement 37,0 kW weight 16,0 t dimensions (WxDxH) 4,0 x 3,6 x 3,4 m year of manufacture 1988 - 2008: NEW control Siemens S 7 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, drawing cushion in table (30 t / 150 mm), ejector in ram (15 t / 30 mm), hydraulic cutting impact cushioning, two-hand operation No foundation pit necessary can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm Dodpsvnmnrjfx Addocr weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Year of construction: 2024, condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Machine in stock and ready for shipping Equipment: - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt Djdped Izq Hofx Addocr - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: good (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm Dedpfxjtqmmdj Addjcr - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Condition: used, mileage: 6,00,761 km, power: 368 kW (500.34 HP), first registration: 11/2017, fuel type: diesel, number of seats: 82, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, +++Engine overhauled+++ +++New tachograph installed+++ +++New paintwork+++ +++Ready for immediate operation+++ +++Lease-purchase!!!+++ Engine: MAN Emission standard: Euro 6 Transmission: Automatic Seating capacity: 80+1+1 sleeper seats with lap belts ---- Safety features * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger area * Auxiliary heater * Wood-effect flooring * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Individual air vents * Reading lights * Double glazing * Footrests * Refrigerator + additional unit * Coffee machine * Center toilet * Leather headrest inserts * Driver’s microphone * Tour guide microphone Exterior * Trailer coupling * Matrix display * Lifting/lowering system Dodpfjurqf Sox Addocr * Power steering * Tachograph with card * Sun visor * Electrically adjustable exterior mirrors * Ski box mounts * Central locking * Roof hatches / ventilators / roof fans Audio & communication * Navigation system * Radio / CD / USB connection * Video / DVD Miscellaneous * Wheel trims * Vehicle dimensions: length 14.00 m, width 2.55 m, height 4.00 m * Twin tyres * Tyre condition: front approx. 20%, middle approx. 10%, rear approx. 20% * Our internal vehicle number: 11040 Subject to errors. Images and text may differ from the actual vehicle. Over 300 vehicles in stock at all times.

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Dcjdsgd Si Eepfx Addor Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: used, Year of construction: 2003, pressure 300 t distance between columns 1640 mm stroke 900 mm Distance table/ram, stroke up 1200 mm table surface area 1600 x 1300 mm table height over floor 890 mm ram surface 1600 x 1300 mm Speed down 400 mm/s Speed up 300 mm/s Working speed 10 mm/s Oil volume 1150 l power requirement 42,5 kW weight 25 t dimensions (WxDxH) 2,8 x 2,5 x 5,0 m year of manufacture 1994 overhaul 2003 permitted for manual loading according to the CE Regulations Dcedpfx Adjvut H Ujdsr with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, ram interlocking, two-hand operation No foundation pit necessary

Condition: excellent (used), Year of construction: 2007, Year: 2007 - technically efficient, ready to work - after full service - flow limitation: 0,2 -2 mm Dcjdpfx Aexqdy Tedder - support arms - PLC driver

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm Dcsdpfovuuiksx Adder pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm Dcedpfx Adsr Ikvuodjr - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Condition: used, Year of construction: 2005, Pressure 600 t Dcsdsvuuh Tjpfx Addjr distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Dsdpfx Ajvuuhgjddecr Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW Dcodevzxpuopfx Addsr weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition