Used Dowel Inserting for sale (2,165)

Condition: used, Year of construction: 1993, Used machine Djdpfx Adew I Uy Todjcr Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Storage location: Nattheim Dcodpfx Adjwkir Dedsr

Condition: like new (used), Shank: 8 mm Dedpevbhaisfx Addocr diameter: Mainly 5.8 & 4.5 mm Quantity: 30 pieces material: HSS

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee Dcsdpfx Aov Trlmedder

Condition: like new (used), Year of construction: 2005, Dowel and slot mortising machine GANNER GANNOMAT JUNIOR 323 Very good condition, the machine is absolutely like new. It comes from an educational institution that was closed approximately one year after the machine was purchased. The machine has a maximum of 10 operating hours. With this machine, you can mill slots and drill dowel holes on two levels without reclamping. 380V, 1500W 2800 rpm Year of manufacture: 2005 With this machine, you can mill slots for, for example, lock cases and similar parts, or produce all types of frame dowel joints—at right angles, butt joints, and mitre joints. Dodpfxoxqy Dns Addscr Ideal for producing dowel joints in timber frame construction, furniture, door, window, and stair manufacturing, and similar applications. Thanks to two-level drilling, stop grids, and the overall design, dowel joints can be produced extremely quickly, making the machine highly economical. Features: - 2 fold-out table extensions - Machine requires a compressed air connection (6 bar, very low air consumption) - Right-hand rotation - Very clean and precise milling and drilling - Supplied with 2 angle stops (one center stop and one side stop, which can be used on both sides) - Also includes an adjustable mitre stop - At the front of the working table, there is a 2000mm long stop rail with two flip stops each. The stop rail can be shortened or extended as required. - Workpiece clamping is carried out with 2 pneumatic clamping cylinders - Height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch is at the front of the machine, enabling fast repositioning and level changes - Heights of the individual drilling levels can be read on 2 mechanical counters, above which there are setting screws to adjust the drilling heights - With a precision 12mm indexing rail, featuring a center index and 12 indexes to the left and right - Can be quickly converted for slot mortising; the machine can then be used without indexing and with 2 adjustable stops left and right, giving a maximum working width of 420mm - Max. drilling height: 100mm - Max. drilling depth: 150mm (with stop and scale) - Max. workpiece height: 160mm Everything works perfectly. The machine will be delivered and demonstrated personally by us throughout Germany for €220, so there is no risk for you when buying. Delivery to Austria and the EU is also possible upon request. The machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle. Professional machine, not DIY store scrap. Ready for immediate operation. Includes 2-jaw drill chuck up to 20mm. Very sturdy and durable construction. Precision linear guides with play-free ball bearing bushes are in good condition and move smoothly.

Condition: used, Year of construction: 1977, operating hours: 250 h, functionality: fully functional, machine/vehicle number: 704384, drilling depth: 80 mm, total length: 1,500 mm, total height: 1,200 mm, overall weight: 640 kg, drill spindle length: 100 mm, compressed air connection: 5 bar, working width: 1,200 mm, height adjustment type: mechanical, space requirement width: 1,200 mm, pressure: 5 bar, power: 4.4 kW (5.98 HP), Machine in excellent condition. Inspection by appointment. Djdpfox Dbg Rox Addjcr

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and Technical Data: - Designed for all window tool systems up to 400 mm tool diameter - Thanks to the standard braking devices (foot brake for slot spindle, automatic electronic safety brake for saw), the machine can be stopped within a few seconds - The protective hoods for the slot spindle and cross-cut saw are designed so that tools can be easily and conveniently changed without having to remove the hoods themselves - The cross-cut saw can be conveniently adjusted from the operator’s position using a quick adjustment. A six-position turret allows for fast changeover to different dimensions - The 40 mm slot spindle can be precisely adjusted in height via a conveniently positioned handwheel with 0.1 mm graduations - The stable roller table, in combination with hardened and ground guides, can be moved easily with minimal effort - Slot spindle motor: 5.5 kW - Slot spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slot spindle height adjustment: 100 mm - Extraction nozzle: 120 mm - Cross-cut saw motor: 2.2 kW - Cross-cut saw speed: 2950 rpm - Saw blade mount: 30 mm Dodexymfdepfx Addscr - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo LAS stop Weight: approx. 600 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Dcodpoxnlfljfx Addjr Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: new, Scope of delivery includes: Heavy-duty anchor, HST2 V3 M12x105 5-25 Order quantity: 25 pcs. Manufacturer: Hilti Version: Carbon steel, zinc-plated Approved for: cracked concrete Through-fix installation: + Pre-fix installation Diameter: M12 Drill hole Ø / Depth: 12 x 88 mm Nominal embedment depth: 80 mm Effective embedment depth: 70 mm Anchor length: 105 mm Clamping thickness: 10 mm Weight per piece: 0.100 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Djdpfxswhfluo Addecr This item is only available for collection. If shipping or delivery is required, additional costs will apply, which can be requested from us depending on the delivery location and scope.

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection Dcsdpfxsw Sgm Hs Adder - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 980275865, workpiece weight (max.): 1,500 kg, space requirement height: 2,600 mm, space requirement width: 1,700 mm, space requirement length: 3,000 mm, The machine was in production use until recently. It has now been dismantled and stored at our facility. The machine can be inspected by appointment. If you have any further questions about the machine, please feel free to write to us or call us. Dcedexclk Dopfx Adder

Condition: like new (used), Year of construction: 2024, operating hours: 350 h, functionality: fully functional, Very good condition, hardly used, as new, available for sale by offer. Dsdpox Ap Adofx Addecr

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Djdpfsxx D D Iox Addocr Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Drilling depth 80 mm With chassis Weight 420 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Dcsdpfxsxwaz Ho Addor

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, compressed air connection: 5 bar, From business closure Schleicher dowel drilling machine DBS 1000 Year of manufacture: 1979 Also ideal for line boring with 5mm holes, 32mm spacing Comes with 25 pcs. 5mm carbide-tipped brad point drills and 8mm carbide drills, as well as 16mm and 35mm drill bits for cup hinges Dcjdpsx Avf Sjfx Addor and other drill bits Pneumatically tiltable to horizontal/vertical position Machine is mobile Payment in cash upon collection No warranty

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dcedpfxsxdttio Addsr - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Complete machine: - 5510 sheet feeder - 4720 Reader module with VEKTOR camera - 4810 Mounting module - 6015 Folding module - 4507 Sequencer module, - 4806 pre-assembly module, - 5552 Insert module - 5552 Insert module - 501 Base unit module - 5571 Envelope feeder module, - 7512 Bypass module - 5535 Stacker module - Bicos 2009 operating system - ANV/DBDI PC for the control integrity system. Dcjdpfx Adsqzhr Ijdsr Reading: VEKTOR camera Can read all types of barcodes, OCR, Datamatrix, barcodes and OME. Bicos version 2009 and ANV/DBDI version V 9.1.5.0 The entire system is configured to read Datamatrix. All modules are tested and packaged. Meter readings can be requested.

Condition: used, Year of construction: 2007, functionality: fully functional, Enclosing machine KERN 3500 Twin Channel K990 with SICK 1D scanner Year of production: 2007. Counter: 145 million Full service contract. Dcsdpfxjxfwfxs Addor I have 2 machines for sale with this same configuration.

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Equipment and technical data: Manufacturer’s information: "Achieving optimal work results begins with precise, continuous processes, accurate working methods, and reduced tolerance for errors. The result is quality down to the last detail — and our processing machines are designed to meet your professional standards. That’s why we have developed a drilling and fitting insertion machine that makes operation and adjustments even more user-friendly — MINIPRESS top. New features enable quick and precise handling, improving your workflow for increased accuracy, efficiency, and quality. Combined with EASYSTICK, the MINIPRESS top offers an optimal package for all drilling operations on carcasses, doors, and fronts. EASYSTICK is the automated, easy-to-adjust stop system for drilling and fitting insertion machines. From rapid and easy machine setup through to perfect results, your entire process is optimized: the drilling positions are determined digitally, the stops move automatically and guide you step by step to the correct positions: place the workpiece, drill, finished! With EASYSTICK, planning and processing on the MINIPRESS top are digitized. You can plan directly at the machine or import your project data from the cabinet configurator quickly and easily via WLAN or USB stick. The imported production data can be accessed and processed directly. The EASYSTICK computer also allows you to make processing settings directly on the MINIPRESS top. Enter carcass and front dimensions, select fittings: EASYSTICK automatically calculates the drilling positions for you. Thanks to EASYSTICK, the MINIPRESS top automatically controls the stop positions. The drilling carriage travels along the Y-axis automatically while the worktable and fence remain stationary — simple to set up and precise. With the MINIPRESS top, you can achieve a reach of up to 350 mm by moving the drilling carriage. This allows, for example, centered rows of holes even with deep cabinets. With the MINIPRESS top, you only need one machine for all vertical and horizontal drilling operations. The horizontal boring unit of the MINIPRESS top allows for precise construction drilling, e.g., for dowels and connectors. The horizontal boring unit is easily accessible and straightforward to adjust and operate." - with 9-spindle line boring head, 32 mm pitch, with positioning pin - with horizontal boring head (3 spindles) - with gearbox for furniture hinges (3 spindles) - with gearbox for straight mounting plates, cabinet connectors (2 spindles) - with gearbox for carcass rails/front fittings (8 spindles) - with extraction set, 125 mm Availability: approx. mid-April 2026 Location: Hesse Dedpexwz Ibofx Addscr

Condition: ready for operation (used), Year of construction: 2003, Rilesa VLG 1524 3 drilling units from above 2 right/left aggregates Dsdpou Shzfjfx Addscr

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable Dcedpfx Adjxdl Rajdsr - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: KAS MAILMASTER 465HS-7, KAS Papersystems Mailmaster 465HS-7 (inserting system) in perfect working condition. Annual maintenance carried out by a professional technician. We no longer have sufficient workloads to justify using this machine. The folding module has seen very little use, almost none at all. Approximately 3.55 million machine cycles. Dcsdpjxx S E Hofx Addsr Configuration and features: - High speed feeder with BCR reading - Accumulator - Disengageable folder for C6/C5 - 3 insert feeders - 1 manual feeder (manual insert for special supplement, sample, etc.) - Inserter for C4, C5, and DL formats, version with 6,000 inserts/hour - Envelope turner for C4, C6 & C5 envelopes - Stand for franking machine or printer with stop sensor - 180° reception conveyor - Colour display & PLC (flip flop, tracking sensor, statistics and reporting)

Condition: excellent (used), Year of construction: 2010, Very nice inserting system for DL, C5 and C4 envelopes which has only 1 mil cycles, 2D Data Matrix camera reading code, accumulator, double fold unit, turnover and shingling conveyor. Dcjdpfxjh H Iuae Adder

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment: With interchangeable boring units for: - Line boring - Hinges - Mounting plates - Connecting fittings - Front fixings Line boring unit can be rotated 90° for use. Dcsdpfx Adjxwz Nxsder Availability: approx. mid/end January 2026 Location: Hesse

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and end-face - Swivel: 0–90 degrees via handwheel - Pneumatic material clamps: 3 pcs - Passage: max. 100 mm height and max. 640 mm width - Motor: 1.5 kW - Extraction connection diameter: 120 mm - Includes a variety of stops (see pictures) Availability: approx. mid-April 2026 Dcodpfx Adjxwz Ihjder Storage location: Hesse