Used Draw Wire for sale (8,296)

Condition: good (used), Year of construction: 2017, Operating hours: 20 h, Functionality: fully functional, Motor voltage: 230 V, Type of input current: AC, ACS 2000 SUMMING MACHINE The ACS 2000 is an air driven wire crimping machine. The Autosplice splicing machine has a motorized feed system for precise strip length control and video monitoring of the components for accurate positioning of the parts. These advantages allow for excellent splice quality. Driving device: servo motor Depth: 22.0" (560 mm) Width: 12.20" (310 mm) Height: 500 mm (19.70") Weight: 112 lbs. (60 kg) Air pressure: 87psi (6 Bar) Voltage: 110V/60Hz or 230V/50Hz Operation: foot switch Display: Foil keypad with LCD display Emergency stop switch Programmable counter C93F2Yi Options: Horn Clincher Crimp Force Monitor Available tool sizes: 2, 4 and 6 mm wide

Year of construction: 2022, Operating hours: 1 h, Condition: excellent (used), Functionality: fully functional, For sale two(2) wire drawing lines with two(2) fiber forming and cutting unit(machine). Um7Przvbcd Liquid cooling system 25m3.

Condition: used, Year of construction: 1991, overhead wire guide inlet wire diameter 6-1,5 mm number of drafts 6 diameter of capstan 600 mm Cwdqkvjodc

Year of construction: 1992, Condition: ready for operation (used), A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of manufacture: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Documentation available. On-site inspection is possible. T98A7Uu8Ff

Year of construction: 1985, Condition: excellent (used), Towing mill model UDZSA, standard size 2500/7 is intended for dry drawing on the principle of accumulation without slipping, wire rod and steel wire (low carbon and high carbon) with a tensile strength of 40-120 kgf / mm2, as well as non-ferrous metal wire. The machine is operated from a separate control panel. The mill is serviced by means of circuit-breakers and an infinitely variable V-belt gearbox. Year of release -1980 Condition - in working condition Production plant: Magdeburg, Germany Basic technical data: Source wire diameter, mm 4.0-8.0 Finished wire diameter, mm 6.0-4.0-2.0 -1.2 Diameter of the final drum along the fillet, mm 600 Drawing speed on the final drum, m / min. 414-486-570-654-756-900 Weight of wire coil on end drum, kg 115-120 Weight of the wire coil on the end drum, kg 500-1100 Number of blocks, pcs. 7 Compression,% 18-32 Power of electric motor of one unit drive, kW 55 Power of the electric motor of the mill drive, kW 55 * 6 = 385 The set includes: 1. Towing mill 2. Grab 3. Rotary crane 4. Formation coil 5. Coil holder 6. Sharpening machine 7. Device for Bxx8Bzsf7A unwinding 8. Screwdriver 9. Ladder switch 10. Welding machine

Condition: reconditioned (used), Year of construction: 2024, Combined drawing machine Schumag KZRP-3B – Ref.U24300 Manufacturer: SCHUMAG Model: KZRP-3B Year: 1979/2024 Push pointer force: 50 tons. Pulling force: 25 tons. Range:19 ÷ 45 mm. rounds Bars length: Up to 6,5 mt. Bolmmcdjgh0 Drawing speed: Up to 55 mt./min Motor power: 340 kW - Brand new Tension: 380 V. - 50 Hz. Note The machine is NOW under complete reconditioning Composition of the line Double tiltable decoiler Coil opener robot type Horizontal + vertical pre-straightener Push-pointer Draw bench Straightener H + V Hydraulic impact shear Conveying trough Two rolls straightening machine ENGEN RL60 Delivery table Collecting cradles Brand new electric equipment Brand new hydraulic equipment

Condition: used, Machine/vehicle number: 1311/750688/1, Wire drawing machine for steel wires up to Ø12 mm Doalt7 - 50kW electric motor - spare drawing dies for hexagonal and round wires included

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Dpglqv Maximum Inlet Wire's Diameter: 30 mm

Condition: used, Year of construction: 1990, inlet wire diameter up to 9 mm Bjzu0Zquwno finished wire diameter 10% reduction number of drafts 1 diameter of capstan 500 mm speed -meters/sek 5

Year of construction: 1993, Condition: ready for operation (used), A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of construction: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Including hydraulic unit G13 AK. Documentation available. E2Ow0P3

Year of construction: 1988, Condition: good (used), Technical Details : - Speed - 10 m/s - Inlet wire - max.7 mm - Out put wire - min. 1,6 mm - Number of drafts - 8 - diameter of blocks - 500 - 650 mm - Engine power - 8x30 kw ( AC with frequent regulation ) - vertical coiler Dwjoge Complete new electric cabinet in 2015

Condition: ready for operation (used), Year of construction: 1950, Manufacturer SCHUMAG Ag, AACHEN, GERMANY Model KZRP-2A Pulling force 6 t. Range Ø 10 ÷ 25 mm. with no ferrous metal Ø 10 ÷ 20 mm. with steel 3Lpzld8Q Drawing speed 28 mt./min. Motor power 30 kW Tension 380 V. - 50 Hz. COMPOSITION OF THE LINE Draw bench Straightener H + V Flying-shear RIPO polishing unit Electric equipment Spares available Manual and drawings available

Condition: used, Year of construction: 1971, Functionality: fully functional, Wire drawing machine HERBORN HG 10, year of construction 1971, modernized 2006 TECHNICAL DETAILS Pulling force: 10 t Wire diameter steel: up to 16 mmØ Copper wire diameter: up to 26 mmØ Drum diameter: 700 mm Bi7Ilsasacy Max. drawing speed: 100 m/min. Main motor: 380/420 V, 50 Hz, 75 kW last produced: Round and square Machine is dismantled and ready for loading, demonstration under power is therefore not possible.

Condition: used, inlet wire diameter 6,5 mm Dnmti7 finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

Year of construction: 1968, Condition: ready for operation (used), Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but set up for torsion free multiple drawing with twin pulleys, with documentation and spare pulleys, has been regularly maintained. Kbbne2Deb7

Year of construction: 1987, Condition: good (used), Technical Details : Input wire - 7.0 mm Out put - 1,8 mm Vertical and horizontal Coiler Of3I2E39 Motor power - 55 Kw/ Block

Condition: used, straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm Bjzve2Mkrq0 speed -meters/sek 15 m

Year of construction: 2002, Condition: ready for operation (used), Max. speed: 360m/min, power: 5.6kW. Cis2Wp2

Condition: new, Year of construction: 2024, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; 4. intermittent welding with wire feeding – like with the TIG manual welding when you add manually electrode drop-after-drop. Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Cgz07Mnafj Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg Bg0Wntxmf9

Year of construction: 2006, Condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 Vtp7Q3 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: used, Functionality: fully functional, Machine/vehicle number: MO 1495, Fully functional Hi-Draw single block drawing machine previously used for drawing low carbon up to 13.5mm diameter. Supplied complete with diameter 700 nominal stripper block, stripper assembly, control cubicle fitted with Parker 590 drive, local control desk and 400V DC motor Blejutjp

Condition: used, Module converter, electronic module Yscxb0 -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V Bjnbz08Stf8 -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: good (used), Year of construction: 2006, Machine/vehicle number: 06F2S855, Mitsubishi FA20SM Year 2006 Wire Cutting Edm Machine Ug7Eoibgaz