Used Drilling Machine Drill Press for sale (68,668)

Condition: ready for operation (used), WMW Pillar Drilling Machine IIK 20 Dedpfx Adoztfdforskr -Drilling capacity: 20 mm -Spindle speeds: 95 / 150 / 190 / 300 / 380 / 600 / 760 / 1200 rpm -Number of speeds: 8 -Gear shifting via 2 shift levers (A/B) -Manual feed -Right/left rotation -Coolant system -Machine light -Height-adjustable and swiveling drilling table with T-slots -Solid cast iron construction -Three-phase motor Dimensions: L x W x H 0.9 x 0.8 x 1.7 meters / Weight 420 kg

Condition: ready for operation (used), ERD Column Drilling Machine, Type B35/40 -Manufacturer: Ing. Ewald Riens, Junior, Bodenburg near Hildesheim -Machine type: ERD B35/40 -Design: Column drilling machine with gear drive Dkodpfxjztd Ivo Adror -Drilling capacity in steel: up to 50 mm -Spindle mount: MK 4 (Morse taper 4) -Quill stroke: 190 mm -Overhang (spindle to column): 325 mm -Column diameter: 140 mm -Table size: approx. 565 × 565 mm -Table adjustment: Height adjustable, rotatable (360°) -Spindle speeds: 6-stage, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 RPM -Note on speed change: Only switch speeds when the spindle is coasting down. -Feed types: Manual and automatic feed -Feed speeds: 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during operation) -Motor power: 2.2 kW (three-phase) -Supply voltage: 400 V -Cutting speed table for SS drills for material ST60 available (operating instructions) Dimensions: L x W x H: 0.9 x 0.5 x 2.05 meters / Weight: 800 kg

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine -Drilling capacity / steel approx. 28mm -Overhang approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm Dkedpfx Ajztdz Ajdrsr -Threading device -Hydraulic clamping -Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Dedpfjzr D Dnjx Adrekr

Condition: ready for operation (used), H. Hartkämper coordinate drilling machine with cross table -Drive: 400 V three-phase -Drilling capacity in steel: approx. 16–20 mm -Spindle mount: MK2 / drill chuck B16 -Speed range: approx. 250–3,000 rpm (multi-stage) -Quill stroke: approx. 80–100 mm -Table size: approx. 1,300 × 600 mm -Travel X: approx. 350–450 mm -Travel Y: approx. 180–250 mm Dedpfx Aoztc A Ejdrskr -Base: integrated steel substructure with storage compartments Dimensions: L x W x H 1.4 x 0.9 x 1.5 meters / Weight 350 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, New machine, purchased in 2020. Ideal for: Furniture manufacturing Kitchen manufacturing Carpenters/joiners Series drilling for Blum fittings and hinges Technical specifications: 3 x 400 V 1.1 kW Djdpfxoznkufo Adrekr Professional industrial version The machine comes from a workshop liquidation. Scope of delivery: Machine Stops/accessories, base frame as shown in the pictures Operating manual Inspection/test run possible by arrangement.

Condition: repair required (used), Year of construction: 2001, machine/vehicle number: 794, functionality: limited functionality, Boring and sawing machine. From 2001 to 2011: operated in a three-shift system From 2011 onwards: operated in a two-shift system Dsdpozrl Eajfx Adrekr Sawing machine: fully functional Boring machine: functional on 2 out of 3 axes Machine is currently running.

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Djdpfozr D Hvox Adrskr Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Condition: ready for operation (used), GILLARDON GR 30/4 – Radial drilling machine -Drilling capacity in steel: Ø 30 mm Dksdpozr U H Hsfx Adrjr -Spindle mount: MK 3 -Drilling stroke: 120 mm -Spindle speed: 45–1,850 rpm -Infinitely variable speed control -Drilling depth stop -Analog speed indicator -Drive power per drilling head: 2.2 kW -Operating voltage: 380 V / 50 Hz -Overhang: 295 mm -Max. distance spindle – table: 550 mm -Table size: approx. 2,000 × 660 mm -Coolant system -Documentation Dimensions: L x W x H 2.0 x 0.7 x 2.0 meters / Weight 2000 kg

Condition: as good as new (ex-display), Year of construction: 2019, bore capacity in steel (diameter) 35,0 mm bore capacity in cast iron 40,0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2.170 mm 2019 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface Djdexaabrjpfx Adrokr - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: excellent (used), functionality: fully functional, A very well-maintained radial drilling machine, manufactured by TAGO, type M 100, with a swiveling square table. Djdpfxozrzlce Adrjkr Outreach: 1000 mm.

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim Dedpfx Adozd Hntorokr

Condition: good (used), Citoborma paper drilling machine, 4 spindles, height-adjustable table, in good condition, immediately available. If you are interested, we will be happy to provide you with information about other machines in our inventory. Dkodpfoxbzfnjx Adrsr You are welcome to inspect the machine at our premises by prior appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM Djdpfx Adeh Ek H Ssrjkr The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, hinge drilling and insertion machine Dodpfx Adjzk Tpworekr

Condition: excellent (used), functionality: fully functional, Working diameter: 2–40 mm. Minimum and maximum point angles: 40–180°. For right- and left-side cutting tools, 1–12 cutting edges. For sharpening twist drills, step drills and tap drills. A wide range of accessories and a user manual for the machine are included. Dkedjzr N Raopfx Adrer Clean and good condition

Condition: like new (used), Year of construction: 2004, Double-side glass drilling machine BUSETTI GIO 1250 Semi-automatic Year of production: 2004 With roller table With manual positioning Water tank with pump included Very good and clean condition Availability immediate Dksdoiy Dxkjpfx Adrjr

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Dodpfjx U Ectjx Adrokr Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Dkedpfxjulz Iwj Adrjr

Condition: used, Year of construction: 2008, machine/vehicle number: 32063, functionality: fully functional, operating hours: 28,800 h, power: 42 kW (57.10 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, table length: 6,100 mm, total length: 8,000 mm, total width: 3,200 mm, total height: 3,800 mm, overall weight: 35,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, For sale is a powerful and reliable CNC press brake, type LVD PPEB 320/61, ideal for precise bending operations in sheet metal processing. Manufacturer: LVD Model: PPEB 320/61 Control: CNC Design: Robust, industrial design Suitable for: Heavy-duty and large-format bending operations Technical data: CNC-controlled back stops Hydraulic upper and lower tool clamping system Safety equipment according to industry standards 5 axes Press force: 320 t Bending length: 6,100 mm Frame width: approx. 5,050 mm Stroke: approx. 250 mm Installation height (table – ram): approx. 500 – 570 mm Dodpfx Adszhtlgsrjkr Condition: The machine is in used, operational condition. Regular maintenance has been performed. Inspection under power is possible by arrangement. Application areas: Steel and metal construction Mechanical engineering Series and single-part production Manufacturing of large-format sheet metal parts Advantages: High press force for demanding applications Large working length for a wide range of applications Proven LVD quality and reliability Precise CNC control for reproducible results Accessories: Many tools and dies, see PDF document The die for the lower tool is not included in the scope of delivery Terms of sale: Price applies ex-foundation Dismantling, removal, loading and transport are the responsibility of the buyer Inspection possible by arrangement Delivery according to EXW (ex works)

Condition: excellent (used), functionality: fully functional, Detel M-35 multi-spindle drilling machine Number of spindles: 35 Spindle spacing: 32 mm Distance between extreme spindles: 1088 mm Drilling depth: up to 90 mm Vertical and horizontal drilling capability Dkodpezh U Hljfx Adrjr 4 pneumatic material clamps Drilling speed adjustment Motor power: 2 x 1.4 kW

Condition: good (used), operating hours: 200 h, functionality: fully functional, machine/vehicle number: H05107, Bench drill press Knuth SSB 50nSuper MK 4 WORK AREA Drilling capacity 50 mm Threading capacity, steel M 30 Table clamping surface 580 mm x 460 mm Dodpfxezqt U Hj Adrokr Quill stroke 200 mm Manual table travel 515 mm Motorized table travel 405 mm Table swivel range (max.) ± 50° Column diameter 180 mm Distance from spindle nose to table surface 575 mm Distance from spindle nose to base 1165 mm Overhang 360 mm MAIN SPINDLE Speed range 50 rpm - 2000 rpm Spindle taper 4 MK FEED Quill feeds 0.08; 0.12; 0.17; 0.24; 0.35; 0.50 mm/rev

Condition: good (used), Year of construction: 1989, bore capacity in steel (diameter) 30 mm throat 300 mm bore stroke 150 mm cross-moving table 600 x 180 total power requirement 1,5 kW weight of the machine ca. 1,1 t Dsdpfxozmix Ho Adrekr dimensions of the machine ca. 1,0 x 1,0 x 2,2 m

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm Dedpey Nkyajfx Adrekr No of Bottom Units: 5 No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 39 Total number of tool changer positions: 22 Dkodpfxeyqxxrs Adrer