Used Drying Tower for sale (2,917)

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Dkedpfoyvuvljx Aptst

Condition: ready for operation (used), Year of construction: 1974, An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible. Dsdpfx Apoy Ndfvotokt

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Dksdpfxorp E Nne Aptjt

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Dodpfx Asuk I Etjptjkt

Year of construction: 2023, condition: ready for operation (used), Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging. Dodouwrwuepfx Aptokt

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Dksdpfx Asy Uydljptet

Year of construction: 2019, condition: ready for operation (used), An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible. Djdpfxsv E Ragj Aptjkt

Year of construction: 2013, condition: ready for operation (used), A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible. Djdpfjyrtayjx Aptskt

Condition: new, Code: N0555 Brand: TOMAR Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Dodpfeui Rpxex Aptokt Length of arms per side mm 780 Useful gap between arms mm 120 N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115

Condition: new, Year of construction: 2025, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our innovative drying systems are available in longitudinal and transversal version and can be combined with all our painting machines. Dsdpfsffc Ufox Aptekt We can also add IR-stripes for faster drying apart from the hot air drying (heated by hot water). You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. The machines will be configured and build according to the wishes of You. Delivery time on request. Do You have further questions? Please feel free to contact us whenever You want!

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY-DUTY Drying Rack / Cantilever Rack – for the most demanding applications The most important facts at a glance: 1. Ball-bearing slide for width adjustment from 1.70 to 3.00 m span. Djdpsfiuhvsfx Aptokt 2. Space-saving, as they can be nested inside each other. 3. Large gap of 135 mm for easy loading, even with a fast work pace. 4. Vertically standing, square-profile beam, for minimal contact area. 5. High usable depth of 1,000 mm. 6. High load capacity of 1,000 kg. 7. Very good rollers that make it easy to move the racks, even when loaded. Simply high quality, "made in Denmark". The racks are usually available for immediate delivery from stock. To save on shipping costs for our customers, we pack the racks pre-assembled (see image). Assembly is very quick. Do you have any questions? Contact us, we will be happy to help!

Condition: used, functionality: unexamined, machine/vehicle number: nicht mehr vorhanden, overall weight: 200 kg, This is a laboratory spray tower with a water evaporation rate of 3 to 5 kg/h, using a two-component nozzle. It will be sold to the highest bidder. Dkjdpfjzupiusx Aptot

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total length: 5,000 mm, total width: 1,500 mm, type of input current: three-phase, year of last overhaul: 2024, working width: 1,500 mm, We are offering this very well-maintained Tesoma Compact gas dryer tunnel, 1.50 m wide, year of manufacture 2009. If you have any questions or would like more information, please feel free to send us a message or call us. Transport to be arranged by the buyer, price excluding VAT. Dedpjy Icdhefx Aptekt

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Djdpetu H Eiefx Aptekt Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm External diameter 2.250 mm Length conveyor belt 48 m Equipment • drying tower downward Dkjdpfed Ert Sox Aptst • infeed left at the top

Condition: excellent (used), Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) - Connections for vacuum and inert gas Dimensions: Djdpfsznbm Eox Aptekt - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Condition: used, Year of construction: 2015, Technical details: Dksdpfxjzl D Exo Aptst table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: excellent (used), Year of construction: 2008, input voltage: 400 V, Gas dryer for textiles after screen printing, M&R Sprint 2000. The oven is in very good condition. Conveyor belt length: 6 m. Stepless regulation of temperature and belt speed. Dksdjxfkyiopfx Aptjt

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list. Dkjdpfx Apezvxxnotst

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Dodpfezvxvasx Aptokt Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm Dsdpfjzlic Nex Aptokt weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 4 x Arbor Clamps 48155-125 Dksdpfeztzi Rox Aptet The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: used, functionality: fully functional, We offer for sale a Heraeus T 5050 E /ct1974 in excellent condition Drying cabinet, industrial oven. Ventilated oven with 2 shelves. Nominal temperature max: 250°C Dkedpfx Apougtz Rotet volume approx. 180 liters Power: 2000W. 1 phase 50Hz Dimensions Interior 50x49x50 cm., housing: 79x56.5x65.5 cm. With Heraeus kelvitron controller - with continuous/timer function. Temperature protection DIN 12880 Protection class: IP20

Condition: good (used), Industrial oven, drying oven Type: PKL-1 Maximum temperature: 180 ° C The temperature is adjustable Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Height: 1450/1900 mm Width: 1250 mm Depth: 850 mm Dsdjd Tiu Iopfx Aptokt Weight: 350 kg We have 3 pieces on Stock!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M Dodpferzq Arsx Aptskt PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.