Used Edge Banding Machine for sale (92,609)

Condition: ready for operation (used), Year of construction: 1999, SCM Edge Banding Machine OLIMPIC S 220 - Manually adjustable infeed fence - Jointing unit - End trimming unit - Flush trimming unit - Chamfer trimming unit - Automatic feed - Corner copying unit with 4 motors Ljdpfxor A Eume Aabeah - Radius scraper knives - Flat scraper knife - Buffing unit - Hot air blower - Machine length: 7.50 m

Condition: excellent (used), Tabletop Edge Bander JAROMA + Edge Trimmer with Cutting Unit Catalogue No. 7729A Edge Bander Equipment: - Tape disc - Glue tank (granulate) - Tape feeder - Guillotine for preliminary trimming of edging - Pressure rollers: 2 pcs Minimum workpiece width: 50 mm Workpiece thickness: 10–40 mm Minimum internal radius: 50 mm Angled edge gluing with 1 mm edging: 0–45° Edging thickness: 0.3–3 mm Electric feed Total power: 2 kW Compressed air pressure: 6–7 bar Dimensions (LxWxH): 1700 x 1300 x 1550 mm Weight: 310 kg Edge Trimmer: Lsdpsxa Eh Dofx Aaboah Minimum workpiece width: 50 mm Workpiece thickness: 16–40 mm Edging thickness: 0.5–3 mm Motor power: 1.1 kW Air requirement: 6 bar Extraction port: 60 mm Dimensions (LxWxH): 1900 x 850 x 1450 mm Weight: 290 kg Cutting Unit: Blade diameter: 150 mm Worktable size: 750 x 820 mm Motor power: 0.12 kW / 2800 rpm – Polish production – Not repainted – DTR technical documentation included – Very good condition – Used edge bander Net price: 11,000 PLN Net price: 2,590 EUR (based on exchange rate of 4.25 EUR/PLN) (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 2008, Used machine Laedexdpm Sspfx Aabjh Year of manufacture: 2008 Equipment and technical data: - Round pot glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for crosscutting/end cap cuts - Top/bottom milling: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing of radii - Flat scraper: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finish - Riepe spray system - Control: PLC with operator panel - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short-term Location: Bavaria

Condition: excellent (used), Year of construction: 2005, Brandt KDF 530 c Edge Bander with Jointing, Corner Rounding, Two Scraper Blades, and Riepe Spray Units. A video of the running machine can be provided upon request. The machine is highly automated. Edge thickness approx. 0.4 - 8 mm Workpiece height approx. 10 - 50 mm Feed speed approx. 11 m/min Soundproof hood Extendable workpiece support table Extraction connection 1x200 mm, 1x100 mm, including the piping as shown PC16 control system with color monitor for easy machine operation Units: Overpressure unit with manual adjustment and SIKO counter Infeed fence with manual adjustment and SIKO counter Lodpfx Aaoxd Dudjboah Riepe separating agent spraying unit Jointing station with Leitz Whispercut DIA cutters, resharpened Gluing station switchable for both co-rotation and counter-rotation Pressure zone with 3 rollers End trimming saw with 2 motors, programmable for straight or chamfered cuts Combination milling unit with motorized lateral adjustment Radius scraper R2, pneumatic adjustment Corner rounding unit R2 with 1 motorized DIA cutter, pneumatically adjustable for thin and thick edges Glue joint scraper, pneumatically retractable with large roller Riepe cleaning agent spraying unit Buffing unit Hood interlock CE marking Operating manual as binder and CD All indexable inserts of the milling units and scraper blades have been replaced or rotated, saws resharpened, jointing cutters resharpened, buffing wheels replaced. The machine is ready for immediate use. Only the DIA cutter on the profile milling unit was not replaced, but is still sharp. Minor paint touch-ups present. Approx. 3,500 operating hours. The condition of the machine speaks for itself. Occasionally, the computer reboots while the machine is running (mainly at high room temperatures), which has not been a problem for us as work can continue simultaneously. Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see "more offers from this supplier."

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design – edge thickness 0.4 - 6 mm SPS screen control Edge-Control PPC 221 color display Pre-milling unit for jointing before the glue application station Fully automatic edge magazine for coil and strip material Ljdpfxjxbf Sxs Aabjah Gluing station GLU-JET for EVA and PUR adhesives, cartridge or granulate + PU Adhesive application via nozzle technology Workpiece height 6-65 mm automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° tilting of the saws Milling unit 1827 MOT 4, flush trimming 8 mm, radius milling – chamfer milling – 15° 1827 MOT NC axes via control panel Corner rounding unit 1832 SPS, rounding of corners up to 3 mm edge thickness in through-feed Scraper unit for chamfer and radius with 2 scraper holders - MOT Flat scraper unit – finish Spray device – PU Complete DIA tool kit included Machine is FACTORY-REFURBISHED in TOP CONDITION Available ex stock Lieboch

Condition: used, Compact Hebrock EURO 3001 edge banding machine for precise edge banding of panel material. The machine enables clean edge processing thanks to automatic glue application, pressure rollers, and finishing units. Ideal for furniture and interior design. Technical specifications subject to change. Unit 1: Glue application Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm Lajdoxdc D Repfx Aabsh feed rate: approx. 10 m/min

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine Manufacturer: Brandt Model: KDF 660 Year of manufacture: 2005 Max. edge thickness: approx. 12 mm Max. workpiece thickness: 60 mm Max. coil material thickness: 3 mm Equipped with: - Pre-milling unit - Coil magazine - Glue application unit - End trimming unit - Top/bottom flush and radius milling Lodpexl Ufvsfx Aabeah - Top/bottom radius milling with front/rear edge copying - Radius scraper - Buffing station Feed speed max. approx. 16 m/min. Connection: 400 V, 50 Hz, 3 Ph Total connected load: approx. 15 kW

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operation: Single-sided, right-hand version Edge thickness: 0.2 – 12 mm Workpiece dimensions Minimum width: 70 mm Laodpfxexa Acro Aabjh Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 – 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 high-frequency motors, 1.5 kW Double end trimming unit with 2 high-frequency motors, 0.3 kW Flush trimming unit with 2 high-frequency motors, 0.7 kW Fine trimming CHAMFERING unit with 2 high-frequency motors, 0.3 kW Fine trimming RADIUS unit with 2 high-frequency motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic roll magazine for coils up to 800 mm diameter, with pneumatic guillotine for edge thickness up to 3 mm Automatic edge magazine with optical monitoring for strip edges in fixed lengths Infeed fence with automatic positioning when inputting the jointing value CM - CombiMelt adhesive application system in modular design Control system via 7-inch TFT color touchscreen display 100 work programs freely and alphanumerically programmable PLC for high-resolution feed control Individual frequency inverters for independent activation of processing motors Hole recognition to suppress CNC operations Network capability for integration into a data network

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 for pre-coated edge material Edge material up to 1.3 mm with roller guillotining with flush trimming with knife Lodpfx Aasxc Rl Hjbeah with top/bottom flush and bevel milling with HF motors Location: Röllbach Availability: short term

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Lsdpfeu R S Nwjx Aabjah Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min Laodpfx Asxf Ewveaboh MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Lasdpfx Ajxh Spksabjh Feed speed 12 m/min.

Condition: excellent (used), Year of construction: 1993, Klein - Edge banding machine KTD51 for moldings And straight edges, with direct glue application. Workpiece length min. 160 mm, workpiece thickness 10 - 40 mm Lsdpfx Aaevf H I Tsbsah Edge thickness 0.5 - 1 mm, inner radius approx. 25 mm Year of manufacture 1993, feed adjustable 4 - 9 m/min, 2.6 kw, 400 Volt

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Total edge length: 211,844 m Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Corner copying unit with 2 motors Scraper unit Laodpfx Ajvnwf Usaboh Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Ligmatech Boomerang return system PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Ledpfx Aew I U Rfeabjah Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 1989, Machine with full equipment Length approx. 9 m Edge gluing Edge sawing Pre-milling Laedef Ua R Hopfx Aabjh Rounding milling Corner copying Pull scraper Buffing Corner copying

Condition: used, Year of construction: 2009, No. 04487 Edge banding machine Format4 Perfect 50 Used, year of construction 2009 Laodpfexbf S Eox Aaboh 114 operating hours Touchscreen color display Panel thickness 10 - 55 mm Minimum panel width 60 mm Minimum panel length 140 mm Edge thickness 0.4 - 8 mm Edge height 12 - 63 mm Variable feed speed from 12.5 m/min Spraying of release and cleaning agents - Workpiece chain conveyor - Glue roller and glue unit, Teflon-coated, for EVA hot melt adhesive - Pressing unit - Impact shears for precutting - Cross-cut saw unit, pneumatically controlled, inclination 0° - 15° - Combination trimming unit for flush and radius trimming, inclination up to 15° - Scraper unit - Polishing unit - Blow-drying unit Suction connection diameter 2 x 120 mm Operating instructions and electrical circuit diagram available Transport dimensions approx. 4250 x 1100 x 1700 mm LWH Weight approx. 1200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Lajdpfx Aaoxh Spdeboh Feed speed 12 m/min.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Edgebanding Machine HolzHer 1321, in very good and fully functional condition, regularly in operation, edging programs available, solid industrial machine. - Pre-milling unit/jointing with spare DIA cutter - Glue application unit upgraded approx. 2-3 years ago to continuous slot nozzle pressure track - Glue height and edge thickness fully controllable via display, supports cartridges or granulate, PU glue possible - Panel preheating - Top and bottom pre-milling with separate units - Motorized rounding milling up to 2 mm Laedpfexiv Efox Aabeh - End trimming unit, straight/angled - Radius scraper - Corner copying unit - Surface scraper - Buffing unit Machine is in ready-to-use condition. Still regularly in use until approx. CW42/43, can be tested on site.

Condition: used, OTT Pacific V12 - Edgebanding SPS-compatible control with LCD display Pre-milling unit with plunge control Fully automatic roll magazine / crosscut shear High-speed gluing station Automatic pressure unit Pneumatic trimming 0-10° Flush milling/chamfer milling 15/30/45° - 8 mm Radius milling R-2, R-5 Corner rounding Radius scraper Surface scraper - will be converted to Schwabbel unit Soundproof cabin with central extraction Machine is WORKSHOP OVERHAULED in VERY GOOD CONDITION Ledpfxsw Nqg Eo Aaboah Available from stock Lieboch

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Lodpfsxix Hxex Aaboah Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm Lsdewtz T Sopfx Aabeah SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, OTT Tornado - TOP Control - via a 15-inch color touchscreen monitor for full automation and maximum ease of use CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules Joining unit for joining chipboard Automatic roller magazine Automatic edge magazine Laodpfxewcymce Aabjh Double end mill with automatic tilting 0° / 3° Flush milling unit - for flush milling - 12mm Fine milling RADIUS - radius milling - profile knives R2 - R5 Automated copy milling - corner rounding Scraper unit - radius Scraper unit - radius - chamfer Surface scraper unit Lubricant spray device - PU Cleaning set with fine buffing unit Very stable workpiece support with roller conveyors - FRONT with scissor extension Complete tooling included Machine is in EXTREMELY MINT CONDITION WELL-MAINTENANCE First commissioned in 2011, very few operating hours, approximately 1200 Machine from lease / leasing option from Lieboch warehouse

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Lodpjw Igg Sofx Aabsah Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Condition: used, OTT Atlantic SPS-based control system High-speed gluing unit Lsdpfx Aew Np Dpeabeah Automatic roll and edge magazine Automated swivelling flush-trimming unit Flush milling Chamfering and radius milling Scraper unit Finish buffing unit All units are controlled via SPS from the operator panel Soundproof enclosure with integrated central extraction The machine is WORKSHOP-TESTED and FULLY FUNCTIONAL Ex stock Lieboch, net €3,000.00